Question: Mesh bed compensation for specific points
-
Hello,
Right now I am using M557 to define the mesh size and spacing before I run a G29. It all works well so far.
In previous versions you used to be able to define specific probing points for mesh bed compensation using x- and y-coordinates. I understand that is now deprecated.
Is there any way I can still do that using a workaround of some kind?
wieman01
-
@wieman01 from commits on GitHub it looks like something similar is coming back in RRF 3.5. At the moment there is no work around
-
Thank you, that is good news. I'll keep an eye out and see what I can find when the first beta comes out.
