Connecting filament runout sensor to Duet 3 Mini 5+
-
Hello. The instructions for adding a runout sensor say that the sensor must be connected to the same board as the extruder it is controlling. However, my extruder is connected via the expansion mini 2+, and there are no pins for adding a sensor. How can I fix this?
-
@tylersuard that's ok as it's still part of the same board, so just connect it as normal.
When it says the sensor must be connected to the same board it's talking about when using CAN-FD boards e.g. having the extruder connected to a toolboard you can't then have the sensor connected to a main board or another expansion board
