NodeDSF : Interface nodes for Node-Red (V1.1.11 - 06-10-23).

tekstyle

i don't think node-red is communicating with DUET when following the email tutorial (https://www.youtube.com/watch?v=cn_XXR3FJ00). link text
here is what my debug looks like. I am now doing this on a rasp pi4 as it wasn't working on my windows 10 machine. I also followed the instructions at link text to install node-red and NODE DSF on it.

dsfModel : msg : Object
object
topic: "dsfModel"
payload: null
dsf: object
monitorMode: "DSF"
monitorError: "No server defined or cannot connect to DSF. Checking again in 10 seconds"
_msgid: "adf0ddc76a5d1eae"

MintyTrebor

@tekstyle Are you using a standalone duet control board, or do you have it connected to an SBC using a ribbon/spi cable?

If you are using a standalone control board you need to set the type to Duet in the connection properties of the monitor node

Then

tekstyle

@mintytrebor

i am using a duet2wifi with a rasp pi4 for node-red.

tekstyle

@mintytrebor

i changed the type to DUET. i also changed my credentialSecret code to false. it seems to be getting something under debug window on the right now. but following your example, i can not see the OM for the command M117 "xxx". if you go to line 141, that is were STATE starts and I do not see the field for displaymessage = "xxx"

12/20/2021, 9:32:20 AM
msg : string[57]
"Error loading flows: Error: Failed to decrypt credentials"
12/20/2021, 9:32:20 AMnode: b881bf70e5d5eca0
dsfModel : msg : Object
object
topic: "dsfModel"
payload: object
fullModel: object
boards: array[1]
0: object
directories: object
empty
fans: array[3]
0: object
actualValue: 0
requestedValue: 0
rpm: -1
1: object
actualValue: 0
requestedValue: 1
rpm: -1
2: object
actualValue: 0
requestedValue: 0
rpm: -1
global: object
ext1: 1
SensorTriggered: 2
heat: object
heaters: array[3]
0: object
active: -273
current: 15.1
standby: 0
state: "active"
1: object
active: 0
current: 14.2
standby: 160
state: "active"
2: object
active: 0
current: -273.1
standby: 0
state: "off"
inputs: array[12]
[0 … 9]
0: object
feedRate: 50
lineNumber: 69
state: "idle"
1: object
feedRate: 50
lineNumber: 0
state: "idle"
2: object
3: object
4: object
5: object
6: object
7: object
8: null
9: object
[10 … 11]
job: object
build: null
duration: null
filePosition: 0
layer: null
layerTime: null
pauseDuration: null
rawExtrusion: null
timesLeft: object
warmUpDuration: null
limits: object
empty
move: object
axes: array[3]
0: object
machinePosition: 0
userPosition: 0
1: object
2: object
currentMove: object
extruders: array[1]
0: object
virtualEPos: -3
network: object
empty
scanner: object
empty
sensors: object
analog: array[3]
0: object
lastReading: 15.1
1: object
2: object
endstops: array[3]
0: object
triggered: false
1: object
2: object
filamentMonitors: array[1]
0: object
status: "ok"
gpIn: array[2]
0: null
1: object
value: 0
probes: array[1]
0: object
value: array[1]
seqs: object
boards: 0
directories: 0
fans: 6
global: 2
heat: 14
inputs: 29753
job: 39
move: 82
network: 7
reply: 168
scanner: 1
sensors: 36
spindles: 0
state: 45
tools: 13
volChanges: array[2]
0: 77
1: 0
volumes: 64929
spindles: array[4]
0: object
current: 0
state: "unconfigured"
1: object
2: object
3: object
state: object
messageBox: object
title: null
message: null
atxPower: true
currentTool: 0
gpOut: array[0]
laserPwm: null
msUpTime: 634
nextTool: 0
previousTool: -1
status: "idle"
time: "2021-12-20T09:32:32"
upTime: 476541
tools: array[2]
0: object
active: array[1]
0: 0
standby: array[1]
state: "active"
1: object
volumes: array[2]
0: object
empty
1: object
patchModel: null
prevModel: null
dsf: object
monitorMode: "Duet"
_msgid: "7916fbc1145cf6f1"

MintyTrebor

@tekstyle ""Error loading flows: Error: Failed to decrypt credentials" is a node-red error (not from NodeDSF) because you have changed your credentialSecret code configuration in your setting.js.

The help text for credentialSecret states changing it will prevent node-red from decrypting existing credentials:

// By default, credentials are encrypted in storage using a generated key. To
 // specify your own secret, set the following property.
 // If you want to disable encryption of credentials, set this property to false.
 // Note: once you set this property, do not change it - doing so will prevent
 // node-red from being able to decrypt your existing credentials and they will be
 // lost.
 //credentialSecret: "a-secret-key",

Which means any ip addresses, usernames, passwords (etc) you configured in your nodes before you changed credentailSecret are no longer accessible to node-red.

I suggest you Reset the settings.js beck to what it was before you changed it.
The default setting is just commented out eg:

//credentialSecret: "a-secret-key",

tekstyle

@mintytrebor
i changed it back to credentialsecret: "a-secret-key" with it commented out. restarted. this is my start log

Starting as a systemd service.
20 Dec 20:55:41 - [info]
Welcome to Node-RED
===================
20 Dec 20:55:41 - [info] Node-RED version: v2.1.4
20 Dec 20:55:41 - [info] Node.js  version: v14.18.2
20 Dec 20:55:41 - [info] Linux 5.10.63-v7l+ arm LE
20 Dec 20:55:42 - [info] Loading palette nodes
20 Dec 20:55:44 - [info] Dashboard version 3.1.2 started at /ui
20 Dec 20:55:44 - [info] Settings file  : /home/pi/.node-red/settings.js
20 Dec 20:55:44 - [info] Context store  : 'storeInFile' [module=localfilesystem]
20 Dec 20:55:44 - [info] Context store  : 'default' [module=memory]
20 Dec 20:55:44 - [info] User directory : /home/pi/.node-red
20 Dec 20:55:44 - [warn] Projects disabled : editorTheme.projects.enabled=false
20 Dec 20:55:44 - [info] Flows file     : /home/pi/.node-red/flows.json
20 Dec 20:55:44 - [info] Server now running at http://127.0.0.1:1880/
20 Dec 20:55:44 - [warn]
---------------------------------------------------------------------
Your flow credentials file is encrypted using a system-generated key.
If the system-generated key is lost for any reason, your credentials
file will not be recoverable, you will have to delete it and re-enter
your credentials.
You should set your own key using the 'credentialSecret' option in
your settings file. Node-RED will then re-encrypt your credentials
file using your chosen key the next time you deploy a change.
---------------------------------------------------------------------
20 Dec 20:55:44 - [warn] Error loading credentials: SyntaxError: Unexpected token � in JSON at position 1
20 Dec 20:55:44 - [warn] Error loading flows: Error: Failed to decrypt credentials
20 Dec 20:55:44 - [info] +-----------------------------------------------------
20 Dec 20:55:44 - [info] | uibuilder v4.1.4 initialised
20 Dec 20:55:44 - [info] | root folder: /home/pi/.node-red/uibuilder
20 Dec 20:55:44 - [info] | Using Node-RED's webserver at:
20 Dec 20:55:44 - [info] |   http://127.0.1.1:1880/ or http://localhost:1880/
20 Dec 20:55:44 - [info] | Installed packages:
20 Dec 20:55:44 - [info] |   jquery, socket.io
20 Dec 20:55:44 - [info] +-----------------------------------------------------
20 Dec 20:55:44 - [info] Starting flows
20 Dec 20:55:44 - [info] Started flows

settings.js below

    flowFile: 'flows.json',

    /** By default, credentials are encrypted in storage using a generated key.$
     * specify your own secret, set the following property.
     * If you want to disable encryption of credentials, set this property to f$
     * Note: once you set this property, do not change it - doing so will preve$
     * node-red from being able to decrypt your existing credentials and they w$
     * lost.
     */
//    credentialSecret: false,
//    credentialSecret: "a-secret-key",

for every change made, how do I apply those changes so node-red knows to reset itself or something to decrypt exisiting credentials properly? right now , I just do node-red-stop followed by node-red-start in terminal.

MintyTrebor

@tekstyle Node-red has probably generated a new key automatically now..

Look for a file called something like "flows_#####cred.json" in .node-red folder (the same folder as settings.js) and rename it to "flows#####_cred.old". Then restart node red.

It will probably clear all of the node settings you have already entered, but it should clear the error.

You will have to re-enter the IP and set the mode to Duet in the monitor node of your flow.

tekstyle

@mintytrebor

renamed the flow_cred.json to flow_cred.old.

stop service and start up again. then deleted all old flow and made new ones. it's weird, i can see the objective models in the debug (eg, it knows I have 2 tools configured) but it just doesn't do anything. it never updates (eg, T0 is set to "off" but it always shows "standby"). Also, the debug would just keep displaying new information even before I press the red deploy button

start log below:

pi@raspberrypi:~/.node-red $ node-red
20 Dec 21:33:24 - [info] 

Welcome to Node-RED
===================

20 Dec 21:33:24 - [info] Node-RED version: v2.1.4
20 Dec 21:33:24 - [info] Node.js  version: v14.18.2
20 Dec 21:33:24 - [info] Linux 5.10.63-v7l+ arm LE
20 Dec 21:33:25 - [info] Loading palette nodes
20 Dec 21:33:27 - [info] Dashboard version 3.1.2 started at /ui
20 Dec 21:33:27 - [info] Settings file  : /home/pi/.node-red/settings.js
20 Dec 21:33:27 - [info] Context store  : 'storeInFile' [module=localfilesystem]
20 Dec 21:33:27 - [info] Context store  : 'default' [module=memory]
20 Dec 21:33:27 - [info] User directory : /home/pi/.node-red
20 Dec 21:33:27 - [warn] Projects disabled : editorTheme.projects.enabled=false
20 Dec 21:33:27 - [info] Flows file     : /home/pi/.node-red/flows.json
20 Dec 21:33:27 - [info] Creating new flow file
20 Dec 21:33:27 - [info] +-----------------------------------------------------
20 Dec 21:33:27 - [info] | uibuilder v4.1.4 initialised
20 Dec 21:33:27 - [info] | root folder: /home/pi/.node-red/uibuilder
20 Dec 21:33:27 - [info] | Using Node-RED's webserver at:
20 Dec 21:33:27 - [info] |   http://127.0.1.1:1880/ or http://localhost:1880/
20 Dec 21:33:27 - [info] | Installed packages:
20 Dec 21:33:27 - [info] |   jquery, socket.io
20 Dec 21:33:27 - [info] +-----------------------------------------------------
20 Dec 21:33:27 - [info] Server now running at http://127.0.0.1:1880/
20 Dec 21:33:27 - [info] Starting flows
20 Dec 21:33:27 - [info] Started flows
20 Dec 21:34:43 - [info] Stopping flows
20 Dec 21:34:43 - [info] Stopped flows
20 Dec 21:34:43 - [info] Starting flows
20 Dec 21:34:43 - [info] Started flows

MintyTrebor

@tekstyle The log shows node-red is working without any credential issues now.

I suggest you go into the monitor node and click the pencil edit button next to the ip address

then delete the config

repeat deletion for every item in the list

Then delete the flow and do a full deploy

Go to the connection test example flow from my repo here, then click copy raw contents

In a new flow click the menu and select import

paste the copied raw data into the box, select new flow, and click import

this will create a new "Connection Example" flow

Double click the monitor node (named Duet2 Board), and click the pencil button and set your duet board IP and mode to Duet

Click update, then done, and then do a full deploy.
Open the debug side window

The use the Start & Stop nodes to control the monitor, the output can be seen in the side debug window. It should look something like this:

tekstyle

@mintytrebor

i got that far. it seems like it is working. I was able to see target active temp change and updated .

when i do a M117 "hello" on my console in DWC. where do I see that in the debug window in node-red.

MintyTrebor

@tekstyle Great!

First check you are on the latest release (v1.1.4) through the palette manager, I found a bug whilst answering your query, so please make sure you are updated before going any further. (It can sometimes take a while before updates show in palette manager)

Then add an DSF Event node plus a debug node and configure it like this:

Deploy, start the monitor and send a M117 message in DWC and it should appear in the debug window (like the picture above).

tekstyle

@mintytrebor

i finally got this to work. that last post was a great help! thank you! now on to setting up email notification.

MintyTrebor

@tekstyle Great! I'm glad you got it working. It's worthwhile spending some time learning node-red, it's really powerful and easy to use, and there are loads of nodes available for interfacing with other IOT stuff etc. I run all my lights, home automation, & printers with it.

tekstyle

@mintytrebor so i used an email node with app password to get it to work. i just want it to display a message with m117 right now. however, it sends me the whole payload of dsf model.

i copied the path "payload.fullModel.state.displayMessage" . i just copied and paste. but it still keeps sending me the whole thing. anyway to zero it down to just what i request of it on the debug node?

MintyTrebor

@tekstyle Using the same example as before:

The DSF Event node sends the value of the event to msg.dsf.eventValue

Look at the help for the DSF Event node and its fully described:

tekstyle

@mintytrebor

My DSF event node/model path = state.displayMessage

debug node/output = msg.dsf.eventValue

the debug window above looks like this:

1/9/2022, 9:07:14 PMnode: aebd8e98337002b3
dsfModel : msg.dsf.eventValue : string[4]
"dfsf"

my email looks like this:

MintyTrebor

@tekstyle The help from the email node states:

So if you want the email to just be the M117 msg text you have to set msg.payload = msg.dsf.eventValue

you need to add a change node to make this change

tekstyle

@mintytrebor Thank you for the tip to check the email node's help. still learning how to use it.

I was able to just send the M117 message. now i am working on how i can send values from the object modelling to it. It will take some time to play around with.

Thanks for getting me started and helping me get a little familiar with how node-red works.

MintyTrebor

V1.1.5 Update - Improved communication in Duet mode which should resolve issue where board could crash or fail to respond, plus fixed node not stopping on deploy when active.

tekstyle

@mintytrebor

I am curious to understand how NodeDSF works. so even though I am just trying to monitor for changes in the display message when a M117 is entered, what I noticed is that when ANY thing gets posted in the console, it trigger a flow no matter if a new M117 command was evoked. I just want to make sure I got this correct.

Regarding your update, majority of my wifi issues came from having a node-red server running on the same network as my duet2wifi. I was getting frequent disconnects that was impossible to resolve. Your update seems to have fixed some of those issues but I still have to mess around with it some more to make sure that was the case.

Currently, I have a very interesting setup. I have 2 wifi adapters on my laptop. 1 integrated, and 1 via USB. i have my integrated connected to my home WIFI. i have the USB connected to the duet in access point mode. i have node-red installed on my windows 10 machine. I am able to access the internet and connect to both node-red and duet2 board with a working nodeDSF.