Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    First run

    Scheduled Pinned Locked Moved
    My Duet controlled machine
    1
    1
    156
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • Falkiaundefined
      Falkia
      last edited by

      Finally my Delta is up and running. After following the delta calibration procedure it was time to run a mesh compensation. Probe radius 200 and spacing 20. I think I can be happy with the result.

      Number of points: 305
      Probe area: 1296.0 cm²
      Maximum deviations: -0.049 / 0.051 mm
      Mean error: -0.003 mm
      RMS error: 0.016 mm

      Bed: 8mm cast aluminum, diameter 510mm
      Build height: 925mm
      Smart effector

      8693426c-1fcc-4683-969a-0251342e081c-image.png

      Printer: "Deltacus" Delta with 510mm bed diameter and 925mm build height. Powered by Duet 2 WiFi. Duet Smart Effector with E3D Volcano.

      1 Reply Last reply Reply Quote 4
      • First post
        Last post
      Unless otherwise noted, all forum content is licensed under CC-BY-SA