Weird G32 (autocal) behavior after update to 1.19.2 firmwares
-
I was/am struggling with a lot of disconnects over wifi, and in an attempt to resolve them I decided to update the firmwares to the latest 1.19.2. After the update my G32 command has gone crazy. I, as well as one other user, have gone over my config.g and bed.g files and nothing looks wrong there. My Z=0 is correct. My FSRs are responding properly.
Setup:
Rostock Max v2 (Delta)
FSRs running to a JohnSL board to endstop on DuetWifiHere are two videos, the first is showing my G32 working properly on the old firmware, and the second is showing its new craziness on the new firmware.
Help?!
-
Delete deploy and retract probe files.
-
https://github.com/dc42/RepRapFirmware/blob/dev/WHATS_NEW.md
Scroll down to V 1.19 when upgrading from 1.18.2
-
Man, I read through those notes probably 3 times before upgrading and I guess since I don't have a probe that deploys or retracts my brain skipped right over it.
All of that stuff is commented out in my config and bed files, but the files it talks about probably still exist. I'll check that in a bit and report back.
Thanks!
-
Perfect, solved it! Thanks!
-
Good deal.
