CAD Files for Rolling Magnet Monitor

[guitartoys]

Hi,

I trying to design a bracket that will combine the Rolling Magnet Monitor with the filament out switch onto a bracket I have for my filament roll feeder.

I can find the step files, but want to know if anyone has and could share with me some actual CAD files of the little enclosure, so I could get the actual dimensions, rather than trying to figure everything out from the STEP file.

I would appreciate it tremendously, and would be happy to share my design when done.

Thanks.

Michael

[alankilian]

@guitartoys You can try measuring from the OpenSCAD or STEP models listed in THIS thread.

[Nurgelrot]

@guitartoys I just loaded the STL files into https://www.tinkercad.com/ Not as elegant as working with a full CAD program but got the job done to add a simple bracket connector.

[guitartoys]

@nurgelrot Thanks. I I loaded that SCAD file from the other thread.

[PCR]

@guitartoys can you link it?

[guitartoys]

@pcr https://forum.duet3d.com/topic/25696/filament-monitor-cad-model?_=1637771442922