Recommend me a heated bed
-
I'm looking at converting a Polaroid Modelsmart 250S to Duet and as part of this I wanted to add a heated bed as it doesn't have one as standard.
It has a glass bed but there is space below it for a heater. The bed is 280mm x 150mm. I was wondering about 2 x 100mmx100mm beds but welcome advice and recommendations. I'm UK based FYI.
The current power supply is a Mean Well
https://www.meanwell-web.com/en-gb/ac-dc-industrial-desktop-adaptor-with-3-pin-iec320-gs120a24--p1m
I'm unsure if this should be also upgraded.
Thanks.
-
the power supply is definantly not enough.
with a heated bed you are look looking for around 300watt.
the bed will most likely also depend on the mounting possibility.
the specs say the build volume is
250 x 150 x 150mm build volumethis one is close
https://clever3d.de/epages/7a4290fc-7c7f-46cc-9b99-eadef22228e2.sf/en_US/?ObjectPath=/Shops/7a4290fc-7c7f-46cc-9b99-eadef22228e2/Products/c3d-DDP-PEI-natur
but you can supply them with your requirement and they will mill the bed according to your requirements -
@Veti Thank you Veti, I will take a look. I also need to look at PSU's then.
