Installation of DWC-plugin for notifications
-
Re: notifications upon start/pause/finish of print
Hi! Read in the beforementioned thread about the "Reprap notify": https://gitlab.com/Toriniasty/reprap_notify/-/releases
I would like to use Pushover to get notifications when the print is done, is there a better way to do it than this plugin? If not, can someone please tell me how to install it. I Use Duet3 with Raspberry Pi and DuetLitePi. I'm fairly new to Linux so a simple step by step or link to a guide would be greatly appreciated!
Tried to google and search the forum but it made me even more confused.
Best regards
-
You could use MQTT4DSF to get information from your printer.
Its then just a case of getting that information to pushover.You could use node-red as the dashboard to do so (this is the best way to install https://tech.scargill.net/the-script/). This has a plugin for pushover.
Or you could follow something like this https://www.hackster.io/matlab-iot/real-time-notifications-with-pushover-mqtt-and-thingspeak-7b87df
