[RRF 3.2-b3] Disabling filament monitor not possible with M591

BoA

I have filament monitor configured, but sometimes I need to switch it off and bypass it - for example TPU prints.

Since now, I was using M591 D0 P0, but it is no longer possible.

So I added C parameter, but the I have:

alankilian

I don't know what version you are running, but this section will tell you how to disable a filament monitor for different versions.

V1.21 to current: Sn 0 = disable filament monitoring
Earlier than V1.2: Pnn Type of sensor, where: 0=none,

BoA

@alankilian Great. For some reason I missed this parameter.