Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    duet 2 wifi is really loud

    Scheduled Pinned Locked Moved
    Tuning and tweaking
    3
    3
    170
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • lynnch21undefined
      lynnch21
      last edited by

      https://youtu.be/SOunUynmQqo
      i do not know how to turn stealth chop on this is firmware from e3d for their e3d tool changer printer i know the e0,e1,e2 and e3d stepper current is set at 1650 ma on moon steppers

      1 Reply Last reply Reply Quote 0
      • jay_s_ukundefined
        jay_s_uk
        last edited by

        Info can be found here https://duet3d.dozuki.com/Wiki/Gcode#Section_M569_Set_motor_driver_direction_enable_polarity_and_step_pulse_timing

        Owns various duet boards and is the main wiki maintainer for the Teamgloomy LPC/STM32 port of RRF. Assume I'm running whatever the latest beta/stable build is

        1 Reply Last reply Reply Quote 0
        • Zhang Jianyuundefined
          Zhang Jianyu
          last edited by Zhang Jianyu

          The Duet 2 WiFi does not support stealthchop because it uses TMC2660 drivers which don't provide said feature. That being said, there are tuning methods to reduce the sound level: https://duet3d.dozuki.com/Wiki/Reducing_Stand-Still_Noise

          Not sure if these apply when running (rather than at standstill) but it might be worth a shot.

          1 Reply Last reply Reply Quote 0
          • First post
            Last post
          Unless otherwise noted, all forum content is licensed under CC-BY-SA