BL touch not extending or retracting
-
I am having trouble getting my bl touch v3.1 to work on my duet wifi 1.04c. The tip will not extend or retract no matter what command i send. I'm pretty sure the bl touch is good as i tried 2 as i bought another one for another printer I'm building. Ive tried about 15 different configs from the config tool. here is a picture of my wiring and my config file and other files that may be useful from the config tool thanks in advance.
retractprobe.g homez.g homeall.g deployprobe.g config.g -
@joshuamensch
Your files are set up for heater 4, but the Bltouch is wired to heater 3? -
thank you this fixed it
