Building a 600x600 MPCNC: Good settings to start with?
-
@arhi fair point, it wasn't my words - it was from the printNC web site. But I guess its all relative if compared to an industrial machine.
-
@bearer said in Building a 600x600 MPCNC: Good settings to start with?:
it was from the printNC web site
yeah, I got the "italic" as a quote
relative
you can get cnc machine (all metal, no printed parts) for 100$ these days assembled and ready to attach to usb and run so it's classic BS marketing made by them ...
I'd rather purchase plans for miranda's machine ... it's imo much better than mpcnc + he's a totally cool guy that accept critique ... iirc Tomas gave mpcnc a finger and gave up on the project (and he was prepared to invest a lot of time in improving it and sharing that improvements) due to reactions of the original designer https://youtu.be/68ohaPYyiDA
-
I wanted something stable that I could reliably machine aluminium with.
When I'm done, I'll still have spent less than I have on my toolchanger.So far, I've built the bench for it, ordered the steel and ordered the main kit of parts from AliExpress.
-
@jay_s_uk the printnc looks nice. If I am unhappy with the MPCNC build, I maybe will replace it with one I just wanted to go fast into milling and had a spare board and pipes and a few printers.
-
@jay_s_uk can you make a review of the printnc when you are done?
-
@dgrat yea, no problem.
I should be starting my build next week so I'll write some blog posts while I'm at it. -
@jay_s_uk I think this cnc looks like a nice project for a Duet 3. But there are not so many people around which did some tests.
-
I build a MPCNC last year. It took me just two weeks to give up a replace it with a Workbee.
-
@dgrat I have a duet 3 but its being used on my toolchanger.
I plan to use either a duet 2 or SKR (running the LPC port of RRF) with external drivers -
@dgrat the CNC build Iām working on now is based on a Duet3. Pretty excited to start making chips!