closed-loop stepper motor with XL delta print
-
I'm In the middle of design my second F.D.M printer (delta type) with duet controller
and I'm thinking to add closed-loop stepper motor either the stepper motor to get maximum speed and reduce the noise to minimum.
the machine size (delta print XL) 1000X500 print area Round 300
so my questions are :
1-Is Expansion Header Breakout Board enough or I need something else ?
the close loop stepper motor +driver
https://www.omc-stepperonline.com/closed-loop/closed-loop-stepper-kit/tp-series-1-axis-closed-loop-stepper-cnc-kit-48ncm-67-99oz-in-nema-17-motor-and-driver.html
2- is there anyone has Experience with closed-loop stepper motor ?
