Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    Solved Updated to RRF3, paneldue 7i stuck at "connecting"

    Duet Hardware and wiring
    2
    3
    161
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • likevviiundefined
      likevvii
      last edited by likevvii

      Hello,
      My paneldue can not connect to my duet wifi 2 anymore. It shows "connecting" on the top right.

      I updated my duet wifi 2 to RRF 3.1.1
      My panel due worked without failure before this.
      My old version was RRF 2.04

      I then proceeded to update my panel due firmware successfully and ended up with the same problem; stuck at "connecting" on the top right.

      My config file is stock and produced from the reprapconfigurator for V3+ with no extra additions.

      1 Reply Last reply Reply Quote 0
      • sebkritikelundefined
        sebkritikel
        last edited by

        Add M575 P1 S1 B57600 to your config.g
        Had to do that myself with the upgrade to 3.1.0 from one of the RC versions I was on.

        Listed in the upgrade notes here for 3.1.0 :https://github.com/Duet3D/RepRapFirmware/blob/v3-dev/WHATS_NEW_RRF3.md

        Large(ish?) IDEX - 6HC, 1HCL

        1 Reply Last reply Reply Quote 1
        • likevviiundefined
          likevvii
          last edited by

          Thanks.
          Worked right away!

          How do I mark this post as solved?

          1 Reply Last reply Reply Quote 1
          • First post
            Last post
          Unless otherwise noted, all forum content is licensed under CC-BY-SA