Bad command issue 3.01 RC11
-
I updated my firmware to 3.01-RC11. When I select tool 1, it errors out, saying that there are bad commands in the console.
T0 Error: Bad command: �S wElac�af Error: Bad command: 9 Error: Bad command: M> _atAps(03�r02 "315>462GGT,'00 CentvcL``ylhght �hoe9� Error: Bad command: 20:9 2:!$:d6 Error: Bad command: GV$0500$(CmnTba�`D`y|igh�0�i-e) Error: Bad command: I1B>�R2 Error: Bad command: 136 P0G1 F25�1 Error: Bad command:
I switched to tool 2, there is no error. However, I could not switch back to tool 1 again without homing.
-
Here is my config.g
config.g -
Nothing immediately sticks out. Do you have any macros the tool change would trigger?
-
I found out that my tpost0.g is corrupted. Recently after updating the firmware, it seemed like some of my files were corrupted.