Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    Hi at this please help

    Scheduled Pinned Locked Moved
    Tuning and tweaking
    3
    12
    334
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • ederundefined
      eder
      last edited by

      Configuration file for Duet WiFi (firmware version 3)
      ; executed by the firmware on start-up
      ;
      ; generated by RepRapFirmware Configuration Tool v2.1.8 on Fri Feb 21 2020 16:39:28 GMT+0100 (Mitteleuropäische Normalzeit)

      ; General preferences
      G90 ; send absolute coordinates...
      M83 ; ...but relative extruder moves
      M550 P"Mister" ; set printer name

      M667 S1 ; select CoreXY mode

      ; Network
      M552 S1 ; enable network
      M586 P0 S1 ; enable HTTP
      M586 P1 S0 ; disable FTP
      M586 P2 S0 ; disable Telnet

      M555 P1 ; Set firmware compatibility to look like Marlinxxxxxxxxxxxxx

      ; Drives
      M569 P0 S0 ;E physical drive 0 goes forwards
      M569 P1 S0 ;X physical drive 1 goes forwards
      M569 P2 S1 ;Y physical drive 2 goes forwards
      M569 P3 S1 ;Z physical drive 3 goes forwards
      M584 X0 Y1 Z2 E3 ; set drive mapping
      M350 X16 Y16 Z16 E16 I0 ; configure microstepping without interpolation
      M92 X80 Y80 Z793.6 E98.03 ; set steps per mm
      M566 X2000 Y2000 Z20 E1000 ; set maximum instantaneous speed changes (mm/min)
      M203 X9000.00 Y9000.00 Z600.00 E6000.00 ; set maximum speeds (mm/min)
      M201 X800.00 Y800.00 Z200.00 E800.00 ; set accelerations (mm/s^2)
      M906 X1000 Y1000 Z1000 E1000 I30 ; set motor currents (mA) and motor idle factor in per cent
      M84 S120 ; Set idle timeout

      ; Axis Limits
      M208 X0 Y0 Z0 S1 ; set axis minima
      M208 X300 Y260 Z310.40 S0 ; set axis maxima

      ; Endstops
      M574 Z2 S0 P"zstop" ; configure active-high endstop for high end on Z via pin zstop
      M574 X1 S1 P"xstop" ; configure active-high endstop for low end on X via pin xstop
      M574 Y1 S1 P"ystop" ; configure active-high endstop for low end on Y via pin ystop

      ; Z-Probe
      M950 S0 C"exp.heater3" ; create servo pin 0 for BLTouch
      M558 P9 C"zprobe.in+zprobe.mod" H5 F400 T9000 ; set Z probe type to bltouch and the dive height + speeds
      G31 P500 X0 Y0 Z4.45 ; set Z probe trigger value, offset and trigger height
      M557 X1:300 Y1:260 S60 ; define mesh grid

      ; BED
      M308 S0 P"bedtemp" Y"PT1000" X500 ; configure sensor 0 as thermistor on pin bedtemp
      M950 H0 C"bedheat" T0 ; create bed heater output on bedheat and map it to sensor 0
      M143 H0 S120 ; set temperature limit for heater 0 to 120C
      M307 H0 B0 S1.00 ; disable bang-bang mode for the bed heater and set PWM limit
      M307 H0 A269.0 C392.3 D2.9 B0
      M305 P0 T100000 X500 R4700
      M140 H0 ; map heated bed to heater 0

      ; HOTEND
      M308 S1 P"e0temp" Y"PT1000"T100000 X501 ; configure sensor 1 as thermistor on pin e0temp
      M950 H1 C"e0heat" T1 ; create nozzle heater output on e0heat and map it to sensor 1
      M143 H1 S280 ; set temperature limit for heater 1 to 280C
      M307 H1 B0 S1 ; disable bang-bang mode for heater and set PWM limit
      M307 H1 A438.8 C250.7 D5.7 B0
      M305 P1 T100000 X501 R4700

      ; Fans
      M950 F0 C"fan0" Q500 ; create fan 0 on pin fan0 and set its frequency
      M106 P0 S0 H1 T100 ; set fan 0 value. Thermostatic control is turned on
      M950 F1 C"fan1" Q500 ; create fan 1 on pin fan1 and set its frequency
      M106 P1 S1 H-1 ; set fan 1 value. Thermostatic control is turned off

      ; Tools
      M563 P0 D0 H1 F0 ; define tool 0
      G10 P0 X0 Y0 Z0 ; set tool 0 axis offsets
      G10 P0 R0 S0 ; set initial tool 0 active and standby temperatures to 0C
      M563 P1 F0:1 ; define tool 1
      G10 P1 X0 Y0 Z0 ; set tool 1 axis offsets
      G10 P1 R0 S0 ; set initial tool 1 active and standby temperatures to 0C

      ; Miscellaneous
      M911 S22 R23 P"M913 X0 Y0 G91 M83 G1 Z3 E-5 F1000" ; set voltage thresholds and actions to run on power loss
      T0 ; select first tool

      1 Reply Last reply Reply Quote 0
      • ederundefined
        eder
        last edited by

        @PaulHew said in Hi at this please help:

        extruder calibration

        Hello, thank you for helping me, extruder has been calibrated

        1 Reply Last reply Reply Quote 0
        • ederundefined
          eder
          last edited by

          extruder has been calibrated but the error remains despite what remains.
          Thanks Eder

          1 Reply Last reply Reply Quote 0
          • PaulHewundefined
            PaulHew
            last edited by

            So you have changed your M92 E value?

            I would suggest that you go through this part of a superb guide.
            https://duet3d.dozuki.com/Guide/Ender+3+Pro+and+Duet+Maestro+Guide+Part+4:+Calibration/40#s165

            Make sure your E steps are correct, then print the calibration cube to tune you flow rate.
            I would start with PLA filament before moving on to other filament types such as PET-G.

            Get the basics right first, I have been known to miss these crucial steps!

            Have you upgraded recently?

            RailCore II - Duet Mini + 1LC, Voron V0.1 - Duet Mini
            Voron 2.4 disassembled..... Waiting for the RailCore Mini....

            1 Reply Last reply Reply Quote 1
            • ederundefined
              eder
              last edited by

              This post is deleted!
              1 Reply Last reply Reply Quote 0
              • ederundefined
                eder
                last edited by

                @eder said in Hi at this please help:

                yes i have ok i try

                1 Reply Last reply Reply Quote 0
                • ederundefined
                  eder
                  last edited by

                  hello, has gotten better but the problem remains despite: - ((

                  1 Reply Last reply Reply Quote 0
                  • monsterundefined
                    monster
                    last edited by

                    Hi, I got similar problem with exactly same model to print 😄
                    But in my case whole model prints very well except first layers corners and corners only were over extruded.
                    20200413_230040.jpg
                    Since in your print it is in bottom and up layers, that might suggest that you could have a look on slicer settings for top/bottom check if you have some hidden settings in slicer and unhide them. Hope you find a clue.

                    Regarding mine problem I wasn't even looking for that solution just because I have generally something very wrong with filament flow in my setup...

                    I remember seeing somewhere setting (or something) that has something to do with extrusion in slows down for cornering, but can't remember where. I'll post if I find.

                    1 Reply Last reply Reply Quote 0
                    • ederundefined
                      eder
                      last edited by

                      This post is deleted!
                      1 Reply Last reply Reply Quote 0
                      • ederundefined
                        eder
                        last edited by

                        thanks monster for information i look times 🙂

                        1 Reply Last reply Reply Quote 0
                        • First post
                          Last post
                        Unless otherwise noted, all forum content is licensed under CC-BY-SA