displaying chamber temp in web interface with RRF 3

r123

have just upgraded to RRF 3.0 & trying to display chamber temperature in web interface.

Define sensor:

M308 S2 P"e1temp" Y"thermistor" A"chamber" T100000 B4725 R4700 H0 L0 C7.06e-8 ; chamber temperature

Define it as a tool so will show up in interface:

M563 P1 D1 H2 S"Chamber" ; Define tool 1

However this isn't working. Am I missing something?

PaulHew

I have a room temp sensor and a secondary bed sensor purely for feedback.

In RRF3 I use

M308 S7 P"exp.thermistor7" Y"thermistor" A"RoomTemp" T100000 B3950 R4700

Then I have to go to the 'Extra' page to view.

HTH

Paul.

r123

Thanks. Not sure where "extras" show up in DWC2 but will try when get back to the machine.

Previously kind of liked displaying chamber temperature as a tool so could eyeball bed / nozzle and chamber temperatures all in one glance and without any navigation.

PaulHew

Sure there is a way, which will require someone more knowledgable than me to assist!

But in the meantime .......

Click the 'Extra'

Regards,

Paul