Solved RRF 3.0 atx power control on dashboard gone?
-
I just updated to RRF 3.0 on a duet wifi, and now I no longer have the ATX on and off buttons on the dashoard of DWC and I don't see anywhere where I can put them back on the dashboard. There used to be a toggle to display it in RRF 2.x can anyone tell me how to get it back?
-
If you send an M80 command to turn on the ATX power supply the ATX control will appear on the Dashboard view. You can put the M80 command in your config.g file.
The on-screen control will remain there after the first M80 command is sent.
-
That did the trick, thanks!
-
@SteveYYC said in RRF 3.0 atx power control on dashboard gone?:
If you send an M80 command to turn on the ATX power supply the ATX control will appear on the Dashboard view. You can put the M80 command in your config.g file.
The on-screen control will remain there after the first M80 command is sent.
or you write M81 in your config.g and it's appear without turn on the psu
-
@pipersw I did not know that M81 would also work. Thanks for that!