How do I up the temperature limit of 260C?
-
6:48:01 AM M143 Temperature limit is 260.0C
I want to do filaments like Polycarb (300C?) and this seems to low. and eSun ABS+ (which specs 220C~260C) So I assume I want this set to maybe 280C or 320C?
Cant find this in the wiki.
-
-
never mind I found it in the config.g
; Heaters
M143 S260 ; Set maximum heater temperature to 260Cdoh…
-
Also make sure your hotend can handle those temps!