Homing problems sensorless and PINDA

flipps

Hi, I hope Google Translate it well.
I am currently updating my Sidewinder, he gets Duet Wifi with 5 inch display, sensorless homing and Pinda. I got it started, the probe responds to my Pei plate. Now I have problems with homing. When I drive an axis it drives home but does not stop walking. He rattles at the endstop, as well as the bed.
Homing macro.txt
homez.g
homey.g
homex.g
homeall.g
config.g

Does anyone have a good tip for me.
Greetings from Germany

Veti

sensorless homing needs to be calibrated to work for your specific setup
see
https://duet3d.dozuki.com/Wiki/Stall_detection_and_sensorless_homing
it does not work by just turning it on

to see if the duet sees your probe triggering use the M119 command
https://duet3d.dozuki.com/Wiki/Gcode#Section_M119_Get_Endstop_Status

flipps

I have read the doku and changed the config.g as described. Are the files I uploadet not displayed?

Veti

from your config

M915 X Y S3

this does not look like a fine tuned M915 command

you have configures no action to be taken.

you are not changing current nor have taken care of the minimun speed.