Hey, I have belt driven system, and RRF version is 3.5.0 RC3 , in this I am facing shifting after Resume APF. We have observed a consistent shifting problem specifically in the Y axis after resume APF. While the resume process itself seems to function properly, the Y axis exhibits an offset. we have use backlash for X & Y axis. Any suggestions on it? @dc42 @Phaedrux

@R006 sounds like you have some mechanical issues on Z and you're potentially under powering your stepper motors. But without knowing anything about your printer, its pretty hard to tell

Your browser does not seem to support JavaScript. As a result, your viewing experience will be diminished, and you have been placed in read-only mode.

Please download a browser that supports JavaScript, or enable it if it's disabled (i.e. NoScript).

Shifting Issue After Resuming APF in RRF

Moved Solved

Beta Firmware

485

undefined

jay_s_uk @R006
last edited by

@R006 sounds like its a mechanical issue or you've set speed limits that are higher than your machine is capable of.
if it was a firmware issue, everyone would be affected
Owns various duet boards and is the main wiki maintainer for the Teamgloomy LPC/STM32 port of RRF. Assume I'm running whatever the latest beta/stable build is
1 Reply Last reply
Reply Quote 0

2 / 2