Write a plugin for DWC- solved using BtnCmd.

moth4017

im not sure if im using "post" correctly. it is working but the http error being reported.

"http://192.168.0.10/tare" is what i need to post. i have tried putting "tare" in the data field but this didnt work. i also tried using "Get" this works too but i get the same http error message . It also says "check Browser Console for more details " but there is never any details.

Other wise were about 80% of the way through the project .

MintyTrebor

@moth4017 If you don't want to send any data then put

{}

in the post data field.

moth4017

@mintytrebor

Hi tried the { } still get the http error, are you expecting a returned code like 200?

MintyTrebor

@moth4017 when you type the Post URL into your browser what is returned?

moth4017

@mintytrebor

putting this into the browser :- http://192.168.0.10/tare{}

Reply
"Path Not Found

URI: /tare%7B%7D
Method: GET
Arguments: 0"

putting this into the browser :- http://192.168.0.10/tare
reply
"tare ok"

the tare ok message is the response from the esp32

moth4017

@mintytrebor
still having a few issues with post does this look correct

MintyTrebor

@moth4017 it's missing the http:// in the URL

moth4017

@mintytrebor
it was a long day and just over looked that one..

Ok i tried the auto restore today renamed file

closed down the browser , which clears all the cached data, restarted DWC , but when i opened up the btncmd interface it had reloaded the default page with the single panel . not the backup, did manaul of install of backup and this was ok

MintyTrebor

@moth4017 take a new backup and replace the BtnCmdAutoRestore.json with the new version. Now open your printer in a private browser window, does it auto restore then?

moth4017

@mintytrebor

Did a new backupAutoRestore file , opened up browser in "incognito" mode put in ip address of the printer , the BtnCmd file did not autorecover .

MintyTrebor

@moth4017 when you click the "info" button in settings, what version does it report?

Edit - On further thought, given your installation issues with the plugin version upgrade. I think it would be wise if you stop the plugin, uninstall it, clear your browser cache, download and install the plugin again, then re-test the auto restore feature with a fresh backup file.

If that does not work send me your backup file please.

moth4017

@mintytrebor
BtnCmd Beta v0.10.13
Cobbled together by Minty Trebor
BtnCmd uses the following libraries/modules:
DeepMerge, MQTT.js, vue-draggable-resizable, axios, jsonpath, vuedraggable
Plus re-uses components and code from DWC.
BtnCmd Wiki
Material Design Icon Library

Ill do the unistall reinstall a bit later on today

moth4017

@mintytrebor

Ok i did the unistall , create new file , do new back up etc etc
opened new browser , and the restore worked, ill keep an eye on it while doing the software on the esp32. cheers

moth4017

This post is deleted!

moth4017

@mintytrebor

Hi well , almot there , jus have some OCD things now to sort

how do i get the buttons and input boxes to line up.

MintyTrebor

@moth4017 turn on Snap to Grid in tab settings

moth4017

@mintytrebor
hi snap to grid was already on.

if i turn off snap to grid and resize so they are the same , then turn on snap to grid , that works,

moth4017

@mintytrebor

Hi is there's an easy way to inherit the DWC styles in one of those html boxes,

so font, text colour, back ground colour etc is the same

MintyTrebor

@moth4017 No

moth4017

calibration page finished