Not showing hotend under tools
-
I am only seeing my bed under tools. Thermistor i s connected to TEMP 1 and OUT 1. What could be the issue? Is was working fine on my duet 2 wifi. Config are added.
-
@Alucardi For my Duet 3 6HC and Mini, bed power is OUT0 and the thermister is on TEMP0. For the Duet 3 6HC, don't forget to supply power to OUT0 Power In.
OUT1/TEMP1 are used for my T0.
-
@Stephen6309 I have triple checked the ports I connected the hotend to. Even if there was an issue would I not see the hotend as a tool in the web interface?
-
You have no tools defined.
; Tools
-
This post is deleted! -
@Phaedrux how do i do that? why was it not configured in the configurator? The bed is showing up fine without me having tools set. So why does the hotend not show? I tried M563 but it does nothing to add that under tools.
-
The web interface is showing tools. A tool is made up of a heater, a motor, and a fan. The bed heater and chamber heater are treated a bit differently. A tool heater without a tool is useless.
Here's an example guide for going through the configurator with the mini5+
https://duet3d.dozuki.com/Guide/Ender+3+Pro+and+Duet+Mini+5++Guide+Part+2:+Configuration/88
