New experimental firmware 1.19beta10

[adri84dj]

@dc42:

If you can wait until tomorrow, I will release beta 11.

Ok perfect. That is good news

[Eddiie]

Did something change that would affect the Z height of my delta between earlier betas before beta 9?
In beta 9 I tweaked the Z probe offset to get the head right when printing.
Now on beta 10 the same settings now the head crashes into the bed, rips the tape off, no filament comes out because the head is pressing so hard against the bed.

Before beta9 -
G31 X0 Y0 Z1.06 P500

On beta9 and beyond -
G31 X0 Y0 Z1.28 P500

I also had a failed print, maybe it screwed up my z probe..

[dc42]

No, nothing has changed in that area.