2/18/2025, 1:54:41 PM	M122
=== Diagnostics ===
RepRapFirmware for Duet 2 WiFi/Ethernet version 3.5.4 (2024-11-24 10:43:42) running on Duet WiFi 1.02 or later
Board ID: 08DJM-9178L-L2MS8-6JKF2-3SN6Q-KTFYR
Used output buffers: 1 of 26 (19 max)
=== RTOS ===
Static ram: 23488
Dynamic ram: 75980 of which 408 recycled
Never used RAM 13504, free system stack 122 words
Tasks: NETWORK(1,ready,14.7%,217) HEAT(3,nWait 5,0.0%,328) Move(4,nWait 5,0.0%,298) MAIN(1,running,85.2%,744) IDLE(0,ready,0.0%,29), total 100.0%
Owned mutexes:
=== Platform ===
Last reset 04:03:20 ago, cause: power up
Last software reset at 2025-02-17 16:54, reason: User, Gcodes spinning, available RAM 13920, slot 2
Software reset code 0x0003 HFSR 0x00000000 CFSR 0x00000000 ICSR 0x00417000 BFAR 0xe000ed38 SP 0x00000000 Task MAIN Freestk 0 n/a
Error status: 0x00
Aux0 errors 0,0,0
MCU temperature: min 33.9, current 37.9, max 38.6
Supply voltage: min 24.1, current 24.3, max 24.4, under voltage events: 0, over voltage events: 0, power good: yes
Heap OK, handles allocated/used 0/0, heap memory allocated/used/recyclable 0/0/0, gc cycles 0
Events: 0 queued, 0 completed
Driver 0: standstill, SG min 0
Driver 1: standstill, SG min 0
Driver 2: standstill, SG min 0
Driver 3: standstill, SG min n/a
Driver 4: standstill, SG min n/a
Driver 5: 
Driver 6: 
Driver 7: 
Driver 8: 
Driver 9: 
Driver 10: 
Driver 11: 
Date/time: 2025-02-18 13:54:39
Cache data hit count 4294967295
Slowest loop: 47.38ms; fastest: 0.15ms
I2C nak errors 0, send timeouts 0, receive timeouts 0, finishTimeouts 0, resets 0
=== Storage ===
Free file entries: 10
SD card 0 detected, interface speed: 20.0MBytes/sec
SD card longest read time 6.6ms, write time 12.8ms, max retries 0
=== Move ===
DMs created 83, segments created 4, maxWait 1025989ms, bed compensation in use: none, height map offset 0.000, max steps late 0, min interval 0, bad calcs 0, ebfmin 0.00, ebfmax 0.00
no step interrupt scheduled
Moves shaped first try 0, on retry 0, too short 0, wrong shape 0, maybepossible 0
=== DDARing 0 ===
Scheduled moves 274, completed 274, hiccups 0, stepErrors 0, LaErrors 0, Underruns [0, 0, 168], CDDA state -1
=== Heat ===
Bed heaters 0 -1 -1 -1, chamber heaters -1 -1 -1 -1, ordering errs 0
=== GCodes ===
Movement locks held by null
HTTP is idle in state(s) 0
Telnet is idle in state(s) 0
File is idle in state(s) 0
USB is idle in state(s) 0
Aux is idle in state(s) 0
Trigger is idle in state(s) 0
Queue is idle in state(s) 0
LCD is idle in state(s) 0
Daemon is idle in state(s) 0
Autopause is idle in state(s) 0
Q0 segments left 0
Code queue 0 is empty
=== Network ===
Slowest loop: 108.55ms; fastest: 0.00ms
Responder states: HTTP(0) HTTP(0) HTTP(0) FTP(0) Telnet(0)
HTTP sessions: 1 of 8
=== WiFi ===
Interface state: active
Module is connected to access point 
Failed messages: pending 0, notrdy 0, noresp 0
Firmware version 1.23
MAC address cc:50:e3:e3:af:f5
Module reset reason: Turned on by main processor, Vcc 3.43, flash size 4194304, free heap 25424
WiFi IP address 192.168.1.132
Signal strength -45dBm, channel 0, mode none, reconnections 0
Clock register ffffffff
Socket states: 0 0 0 0 0 0 0 0