9/22/2024, 1:44:49 PM: Connected to 192.168.1.117
9/22/2024, 1:45:03 PM: G32: Starting bed calibration
9/22/2024, 1:45:21 PM: Connection interrupted, attempting to reconnect...: Operation failed (Reason: Service Unavailable)
9/22/2024, 1:45:21 PM: Connection established
9/22/2024, 1:45:30 PM: Connection interrupted, attempting to reconnect...: Operation failed (Reason: Service Unavailable)
9/22/2024, 1:45:31 PM: Connection established
9/22/2024, 1:45:31 PM: : Calibrated 9 factors using 10 points, (mean, deviation) before (-0.012, 0.012) after (-0.000, 0.007)
9/22/2024, 1:45:32 PM: : Calibrated 9 factors using 10 points, (mean, deviation) before (-0.012, 0.012) after (-0.000, 0.007)
9/22/2024, 1:45:33 PM: Connection interrupted, attempting to reconnect...: Operation failed (Reason: Service Unavailable)
9/22/2024, 1:45:33 PM: Connection established
9/22/2024, 1:45:34 PM: : Auto calibration successful, deviation 0.007mm
9/22/2024, 1:45:35 PM: : Auto calibration successful, deviation 0.007mm
9/22/2024, 1:45:35 PM: : Auto calibration successful, deviation 0.007mm
9/22/2024, 1:45:36 PM: : Auto calibration successful, deviation 0.007mm
9/22/2024, 1:50:25 PM: M122: === Diagnostics ===
RepRapFirmware for Duet 2 WiFi/Ethernet version 3.5.3 (2024-09-18 11:25:32) running on Duet Ethernet 1.02 or later
Board ID: 08DDM-9FAM2-LW4SD-6J9F4-3S06R-9LXVW
Used output buffers: 1 of 26 (25 max)
=== RTOS ===
Static ram: 23376
Dynamic ram: 67728 of which 36 recycled
Never used RAM 19364, free system stack 122 words
Tasks: NETWORK(1,ready,30.4%,217) HEAT(3,nWait 5,0.1%,328) Move(4,nWait 5,0.0%,298) MAIN(1,running,69.5%,431) IDLE(0,ready,0.0%,29), total 100.0%
Owned mutexes:
=== Platform ===
Last reset 02:13:50 ago, cause: software
Last software reset at 2024-09-22 10:43, reason: User, Gcodes spinning, available RAM 19364, slot 2
Software reset code 0x0003 HFSR 0x00000000 CFSR 0x00000000 ICSR 0x0041f000 BFAR 0xe000ed38 SP 0x00000000 Task MAIN Freestk 0 n/a
Error status: 0x00
Aux0 errors 0,0,1496
MCU temperature: min 45.1, current 45.8, max 47.2
Supply voltage: min 12.1, current 12.2, max 12.3, under voltage events: 0, over voltage events: 0, power good: yes
Heap OK, handles allocated/used 99/0, heap memory allocated/used/recyclable 2048/1440/1440, gc cycles 0
Events: 0 queued, 0 completed
Driver 0: standstill, SG min 0
Driver 1: standstill, SG min 0
Driver 2: standstill, SG min 0
Driver 3: standstill, SG min n/a
Driver 4: standstill, SG min n/a
Driver 5: 
Driver 6: 
Driver 7: 
Driver 8: 
Driver 9: 
Driver 10: 
Driver 11: 
Date/time: 2024-09-22 13:50:22
Cache data hit count 4294967295
Slowest loop: 1721.31ms; fastest: 0.17ms
I2C nak errors 0, send timeouts 0, receive timeouts 0, finishTimeouts 0, resets 0
=== Storage ===
Free file entries: 10
SD card 0 detected, interface speed: 20.0MBytes/sec
SD card longest read time 250.0ms, write time 0.0ms, max retries 0
=== Move ===
DMs created 83, segments created 5, maxWait 7407323ms, bed compensation in use: mesh, height map offset 0.000, max steps late 0, min interval 0, bad calcs 0, ebfmin 0.00, ebfmax 0.00
no step interrupt scheduled
Moves shaped first try 0, on retry 0, too short 0, wrong shape 0, maybepossible 0
=== DDARing 0 ===
Scheduled moves 311, completed 311, hiccups 0, stepErrors 0, LaErrors 0, Underruns [0, 0, 1], CDDA state -1
=== Heat ===
Bed heaters 0 -1 -1 -1, chamber heaters -1 -1 -1 -1, ordering errs 0
Heater 0 is on, I-accum = 0.0
Heater 1 is on, I-accum = 0.0
=== GCodes ===
Movement locks held by null
HTTP is idle in state(s) 0
Telnet is idle in state(s) 0
File is idle in state(s) 0
USB is idle in state(s) 0
Aux is idle in state(s) 0
Trigger is idle in state(s) 0
Queue is idle in state(s) 0
LCD is idle in state(s) 0
Daemon is idle in state(s) 0
Autopause is idle in state(s) 0
Q0 segments left 0
Code queue 0 is empty
=== Network ===
Slowest loop: 44.83ms; fastest: 0.02ms
Responder states: HTTP(0) HTTP(0) HTTP(0) FTP(0) Telnet(0)
HTTP sessions: 2 of 8
Interface state active, link 100Mbps full duplex
Socket states: 5 2 2 2 0 2