9/15/2023, 5:32:55 PM	SD read speed for 10.0MByte file was 1.92MBytes/sec
9/15/2023, 5:32:50 PM	SD write speed for 10.0MByte file was 4.54MBytes/sec
Testing SD card read speed...
9/15/2023, 5:32:47 PM	M122 P104 S10
Testing SD card write speed...
9/15/2023, 5:30:10 PM	m39
SD card in slot 0: capacity 31.91GB, partition size 31.90GB, free space 31.72GB, speed 25.00MBytes/sec, cluster size 32kB
9/15/2023, 5:28:59 PM	m122
=== Diagnostics ===
RepRapFirmware for Duet 3 MB6XD version 3.4.6 (2023-07-21 14:11:58) running on Duet 3 MB6XD v1.0 (standalone mode)
Board ID: 08DLM-956DA-M2NS4-6J1F6-3S86T-1B3US
Used output buffers: 3 of 40 (25 max)
=== RTOS ===
Static ram: 151692
Dynamic ram: 96284 of which 0 recycled
Never used RAM 102696, free system stack 200 words
Tasks: NETWORK(ready,45.2%,173) ETHERNET(notifyWait,1.6%,316) HEAT(notifyWait,0.0%,369) Move(notifyWait,0.0%,352) CanReceiv(notifyWait,0.0%,798) CanSender(notifyWait,0.0%,335) CanClock(delaying,0.0%,349) MAIN(running,50.9%,1127) IDLE(ready,2.2%,29), total 100.0%
Owned mutexes: LwipCore(NETWORK)
=== Platform ===
Last reset 00:02:03 ago, cause: power up
Last software reset at 2023-09-14 22:09, reason: User, GCodes spinning, available RAM 102696, slot 2
Software reset code 0x0003 HFSR 0x00000000 CFSR 0x00000000 ICSR 0x00400000 BFAR 0x00000000 SP 0x00000000 Task MAIN Freestk 0 n/a
Error status: 0x00
Step timer max interval 62171
MCU temperature: min 27.5, current 31.2, max 31.3
Supply voltage: min 24.0, current 24.1, max 24.1, under voltage events: 0, over voltage events: 0, power good: yes
12V rail voltage: min 12.2, current 12.3, max 12.4, under voltage events: 0
Heap OK, handles allocated/used 0/0, heap memory allocated/used/recyclable 0/0/0, gc cycles 0
Events: 0 queued, 0 completed
Driver 0: ok
Driver 1: ok
Driver 2: ok
Driver 3: ok
Driver 4: ok
Driver 5: ok
Date/time: 2023-09-15 17:28:58
Slowest loop: 1491.45ms; fastest: 0.05ms
=== Storage ===
Free file entries: 10
SD card 0 detected, interface speed: 25.0MBytes/sec
SD card longest read time 2.4ms, write time 154.8ms, max retries 0
=== Move ===
DMs created 125, segments created 0, maxWait 0ms, bed compensation in use: none, comp offset 0.000
=== MainDDARing ===
Scheduled moves 0, completed 0, hiccups 0, stepErrors 0, LaErrors 0, Underruns [0, 0, 0], CDDA state -1
=== AuxDDARing ===
Scheduled moves 0, completed 0, hiccups 0, stepErrors 0, LaErrors 0, Underruns [0, 0, 0], CDDA state -1
=== Heat ===
Bed heaters 0 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1, chamber heaters -1 -1 -1 -1, ordering errs 0
Heater 1 is on, I-accum = 0.0
Heater 2 is on, I-accum = 0.0
=== GCodes ===
Segments left: 0
Movement lock held by null
HTTP is idle in state(s) 0
Telnet is idle in state(s) 0
File is idle in state(s) 0
USB is idle in state(s) 0
Aux is idle in state(s) 0
Trigger is idle in state(s) 0
Queue is idle in state(s) 0
LCD is idle in state(s) 0
SBC is idle in state(s) 0
Daemon is idle in state(s) 0
Aux2 is idle in state(s) 0
Autopause is idle in state(s) 0
Code queue is empty
=== CAN ===
Messages queued 816, received 3630, lost 0, boc 0
Longest wait 0ms for reply type 0, peak Tx sync delay 4, free buffers 50 (min 50), ts 453/453/0
Tx timeouts 0,0,0,0,0,0
=== Network ===
Slowest loop: 3780.92ms; fastest: 0.03ms
Responder states: HTTP(0) HTTP(0) HTTP(0) HTTP(0) HTTP(0) HTTP(0) FTP(0) Telnet(0) Telnet(0)
HTTP sessions: 1 of 8
= Ethernet =
State: active
Error counts: 0 0 0 0 0 0
Socket states: 5 2 2 2 2 0 0 0
=== Multicast handler ===
Responder is inactive, messages received 0, responses 0
9/15/2023, 5:28:32 PM	Connection established
9/15/2023, 5:28:32 PM	Failed to upload curved-2091611 2.gcode
Could not complete action because the connection has been terminated
9/15/2023, 5:28:31 PM	Connection interrupted, attempting to reconnect...
HTTP request timed out
9/15/2023, 5:27:29 PM	m122
=== Diagnostics ===
RepRapFirmware for Duet 3 MB6XD version 3.4.6 (2023-07-21 14:11:58) running on Duet 3 MB6XD v1.0 (standalone mode)
Board ID: 08DLM-956DA-M2NS4-6J1F6-3S86T-1B3US
Used output buffers: 1 of 40 (13 max)
=== RTOS ===
Static ram: 151692
Dynamic ram: 96284 of which 0 recycled
Never used RAM 102696, free system stack 202 words
Tasks: NETWORK(ready,35.7%,173) ETHERNET(notifyWait,0.2%,316) HEAT(notifyWait,0.0%,373) Move(notifyWait,0.0%,352) CanReceiv(notifyWait,0.0%,798) CanSender(notifyWait,0.0%,335) CanClock(delaying,0.0%,352) MAIN(running,63.5%,1127) IDLE(ready,0.5%,29), total 100.0%
Owned mutexes:
=== Platform ===
Last reset 00:00:32 ago, cause: power up
Last software reset at 2023-09-14 22:09, reason: User, GCodes spinning, available RAM 102696, slot 2
Software reset code 0x0003 HFSR 0x00000000 CFSR 0x00000000 ICSR 0x00400000 BFAR 0x00000000 SP 0x00000000 Task MAIN Freestk 0 n/a
Error status: 0x00
Step timer max interval 1665
MCU temperature: min 18.1, current 27.7, max 27.7
Supply voltage: min 23.9, current 24.1, max 24.3, under voltage events: 0, over voltage events: 0, power good: yes
12V rail voltage: min 12.2, current 12.3, max 12.4, under voltage events: 0
Heap OK, handles allocated/used 0/0, heap memory allocated/used/recyclable 0/0/0, gc cycles 0
Events: 0 queued, 0 completed
Driver 0: ok
Driver 1: ok
Driver 2: ok
Driver 3: ok
Driver 4: ok
Driver 5: ok
Date/time: 2023-09-15 17:27:27
Slowest loop: 6.03ms; fastest: 0.05ms
=== Storage ===
Free file entries: 10
SD card 0 detected, interface speed: 25.0MBytes/sec
SD card longest read time 2.3ms, write time 0.0ms, max retries 0
=== Move ===
DMs created 125, segments created 0, maxWait 0ms, bed compensation in use: none, comp offset 0.000
=== MainDDARing ===
Scheduled moves 0, completed 0, hiccups 0, stepErrors 0, LaErrors 0, Underruns [0, 0, 0], CDDA state -1
=== AuxDDARing ===
Scheduled moves 0, completed 0, hiccups 0, stepErrors 0, LaErrors 0, Underruns [0, 0, 0], CDDA state -1
=== Heat ===
Bed heaters 0 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1, chamber heaters -1 -1 -1 -1, ordering errs 0
Heater 1 is on, I-accum = 0.0
Heater 2 is on, I-accum = 0.0
=== GCodes ===
Segments left: 0
Movement lock held by null
HTTP is idle in state(s) 0
Telnet is idle in state(s) 0
File is idle in state(s) 0
USB is idle in state(s) 0
Aux is idle in state(s) 0
Trigger is idle in state(s) 0
Queue is idle in state(s) 0
LCD is idle in state(s) 0
SBC is idle in state(s) 0
Daemon is idle in state(s) 0
Aux2 is idle in state(s) 0
Autopause is idle in state(s) 0
Code queue is empty
=== CAN ===
Messages queued 307, received 1266, lost 0, boc 0
Longest wait 3ms for reply type 6053, peak Tx sync delay 4, free buffers 50 (min 49), ts 164/163/0
Tx timeouts 0,0,0,0,0,0
=== Network ===
Slowest loop: 4.25ms; fastest: 0.03ms
Responder states: HTTP(0) HTTP(0) HTTP(0) HTTP(0) HTTP(0) HTTP(0) FTP(0) Telnet(0) Telnet(0)
HTTP sessions: 1 of 8
= Ethernet =
State: active
Error counts: 0 0 0 0 0 0
Socket states: 5 2 2 2 2 0 0 0
=== Multicast handler ===
Responder is inactive, messages received 0, responses 0
9/15/2023, 5:27:21 PM	Connected to 192.168.3.222