M122
=== Diagnostics ===
RepRapFirmware for Duet 2 WiFi/Ethernet version 3.4.5 (2022-11-30 19:36:12) running on Duet WiFi 1.02 or later + DueX5v0.11
Board ID: 0JD0M-9P6B2-NJ4S4-6J9DD-3S46N-9V0GM
Used output buffers: 3 of 26 (12 max)
=== RTOS ===
Static ram: 23836
Dynamic ram: 76312 of which 0 recycled
Never used RAM 9076, free system stack 186 words
Tasks: NETWORK(ready,14.5%,382) HEAT(notifyWait,0.0%,333) Move(notifyWait,0.0%,363) DUEX(notifyWait,0.0%,24) MAIN(running,85.5%,428) IDLE(ready,0.0%,30), total 100.0%
Owned mutexes: USB(MAIN)
=== Platform ===
Last reset 00:07:31 ago, cause: power up
Last software reset time unknown, reason: User, GCodes spinning, available RAM 9076, slot 1
Software reset code 0x0003 HFSR 0x00000000 CFSR 0x00000000 ICSR 0x0041f000 BFAR 0xe000ed38 SP 0x00000000 Task MAIN Freestk 0 n/a
Error status: 0x00
Aux0 errors 0,0,0
Step timer max interval 0
MCU temperature: min 27.7, current 28.1, max 29.4
Supply voltage: min 1.7, current 1.7, max 1.8, under voltage events: 0, over voltage events: 0, power good: no
Heap OK, handles allocated/used 99/14, heap memory allocated/used/recyclable 2048/1238/1034, gc cycles 148
Events: 0 queued, 0 completed
Driver 0: ok, SG min n/a
Driver 1: ok, SG min n/a
Driver 2: ok, SG min n/a
Driver 3: ok, SG min n/a
Driver 4: ok, SG min n/a
Driver 5: ok, SG min n/a
Driver 6: ok, SG min n/a
Driver 7: ok, SG min n/a
Driver 8: ok, SG min n/a
Driver 9: ok, SG min n/a
Driver 10: 
Driver 11: 
Date/time: 1970-01-01 00:00:00
Cache data hit count 4294967295
Slowest loop: 99.78ms; fastest: 0.11ms
I2C nak errors 0, send timeouts 0, receive timeouts 0, finishTimeouts 0, resets 0
=== Storage ===
Free file entries: 9
SD card 0 detected, interface speed: 20.0MBytes/sec
SD card longest read time 0.4ms, write time 0.0ms, max retries 0
=== Move ===
DMs created 83, segments created 0, maxWait 0ms, bed compensation in use: none, comp offset 0.000
=== MainDDARing ===
Scheduled moves 0, completed 0, hiccups 0, stepErrors 0, LaErrors 0, Underruns [0, 0, 0], CDDA state -1
=== AuxDDARing ===
Scheduled moves 0, completed 0, hiccups 0, stepErrors 0, LaErrors 0, Underruns [0, 0, 0], CDDA state -1
=== Heat ===
Bed heaters -1 -1 -1 -1, chamber heaters -1 -1 -1 -1, ordering errs 0
=== GCodes ===
Segments left: 0
Movement lock held by null
HTTP is idle in state(s) 0
Telnet is idle in state(s) 0
File is idle in state(s) 0
USB is ready with "M122" in state(s) 0
Aux is idle in state(s) 0
Trigger is idle in state(s) 0
Queue is idle in state(s) 0
LCD is idle in state(s) 0
Daemon is doing "G4 P1000" in state(s) 0 0, running macro
Autopause is idle in state(s) 0
Code queue is empty
=== Filament sensors ===
Extruder 0 sensor: no data received
=== DueX ===
Read count 0, 0.00 reads/min
=== Network ===
Slowest loop: 1001.22ms; fastest: 0.00ms
Responder states: HTTP(0) HTTP(0) HTTP(0) HTTP(0) FTP(0) Telnet(0)
HTTP sessions: 0 of 8
= WiFi =
Network state is disabled
WiFi module is disabled
Failed messages: pending 0, notready 0, noresp 0
Socket states: 0 0 0 0 0 0 0 0
ok
M552 S0
ok
M552 
WiFi module is being started
ok
WiFi module disabled - start timed out
M552 
WiFi module is disabled
ok
M552 S0
ok
M552 
WiFi module is being started
ok
WiFi module disabled - start timed out
M552 
WiFi module is disabled
ok
M552 S0
ok
M552 
WiFi module is being started
ok
WiFi module disabled - start timed out
M552 
WiFi module is disabled
ok
M997 S1
T0:34.6 /0.0
Trying to connect at 230400 baud:  failed
Trying to connect at 115200 baud:  failed
Trying to connect at 74880 baud:  failed
Trying to connect at 9600 baud:  failed
Error: Installation failed due to comm write error
ok
M997 S1
T0:34.6 /0.0
Trying to connect at 230400 baud:  failed
Trying to connect at 115200 baud:  failed
Trying to connect at 74880 baud:  failed
Trying to connect at 9600 baud:  failed
Error: Installation failed due to comm write error
ok

-----------------------------
At this point I downloaded your beta version of the wifi firmware and attempted to install
-----------------------------

M997 S1
T0:28.9 /0.0
Trying to connect at 230400 baud:  failed
Trying to connect at 115200 baud:  failed
Trying to connect at 74880 baud:  failed
Trying to connect at 9600 baud:  failed
Error: Installation failed due to comm write error
ok
M997 S1
T0:29.1 /0.0
Trying to connect at 230400 baud:  failed
Trying to connect at 115200 baud:  failed
Trying to connect at 74880 baud:  failed
Trying to connect at 9600 baud:  failed
Error: Installation failed due to comm write error
ok
M997 S1
T0:28.6 /0.0
Trying to connect at 230400 baud:  failed
Trying to connect at 115200 baud:  failed
Trying to connect at 74880 baud:  failed
Trying to connect at 9600 baud:  failed
Error: Installation failed due to comm write error
ok