2023-07-21 08:52:48,955 - MainThread - DuetLapse3 Version --- 5.3.0 2023-07-21 08:52:48,955 - MainThread - Process Id --- 6407 2023-07-21 08:52:48,955 - MainThread - ------------------------------------------------------------------------------- 2023-07-21 08:52:48,956 - MainThread - ################### Options at start of this print job ##################### 2023-07-21 08:52:48,956 - MainThread - # Environment 2023-07-21 08:52:48,956 - MainThread - -duet = 192.168.1.128 2023-07-21 08:52:48,956 - MainThread - -basedir = /opt/dsf/sd/DuetLapse3 2023-07-21 08:52:48,957 - MainThread - -poll = 10 2023-07-21 08:52:48,957 - MainThread - -instances = single 2023-07-21 08:52:48,957 - MainThread - -logtype = both 2023-07-21 08:52:48,957 - MainThread - -nolog = False 2023-07-21 08:52:48,958 - MainThread - -verbose = True 2023-07-21 08:52:48,958 - MainThread - -host = 0.0.0.0 2023-07-21 08:52:48,958 - MainThread - -port = 8082 2023-07-21 08:52:48,958 - MainThread - -keeplogs = False 2023-07-21 08:52:48,959 - MainThread - -novideo = False 2023-07-21 08:52:48,959 - MainThread - -deletepics = False 2023-07-21 08:52:48,959 - MainThread - -maxffmpeg = 2 2023-07-21 08:52:48,959 - MainThread - -keepfiles = True 2023-07-21 08:52:48,959 - MainThread - # Execution 2023-07-21 08:52:48,959 - MainThread - -dontwait = False 2023-07-21 08:52:48,960 - MainThread - -seconds = 0 2023-07-21 08:52:48,960 - MainThread - -detect = layer 2023-07-21 08:52:48,960 - MainThread - -pause = no 2023-07-21 08:52:48,960 - MainThread - -numlayers = 1 2023-07-21 08:52:48,961 - MainThread - -movehead = [0, 0] 2023-07-21 08:52:48,961 - MainThread - -rest = 1 2023-07-21 08:52:48,961 - MainThread - -standby = False 2023-07-21 08:52:48,961 - MainThread - -restart = True 2023-07-21 08:52:48,961 - MainThread - # Camera 2023-07-21 08:52:48,962 - MainThread - -camera1 = stream 2023-07-21 08:52:48,962 - MainThread - -camera2 2023-07-21 08:52:48,962 - MainThread - -weburl1 = http://192.168.1.128:8084/stream 2023-07-21 08:52:48,962 - MainThread - -weburl2 2023-07-21 08:52:48,962 - MainThread - # Video 2023-07-21 08:52:48,963 - MainThread - -extratime = 0 2023-07-21 08:52:48,963 - MainThread - -fps = 10 2023-07-21 08:52:48,963 - MainThread - -minvideo = 5 2023-07-21 08:52:48,963 - MainThread - -maxvideo = 0 2023-07-21 08:52:48,963 - MainThread - # Overrides 2023-07-21 08:52:48,964 - MainThread - -camparam1 2023-07-21 08:52:48,964 - MainThread - -camparam2 2023-07-21 08:52:48,964 - MainThread - -vidparam1 2023-07-21 08:52:48,964 - MainThread - -vidparam2 2023-07-21 08:52:48,964 - MainThread - # UI 2023-07-21 08:52:48,965 - MainThread - -hidebuttons = False 2023-07-21 08:52:48,965 - MainThread - # Special Functions 2023-07-21 08:52:48,965 - MainThread - -execkey 2023-07-21 08:52:48,965 - MainThread - ----------------------------------------------------------------------- 2023-07-21 08:52:48,966 - MainThread - ########################################################## 2023-07-21 08:52:48,966 - MainThread - Will start capturing images on first layer change 2023-07-21 08:52:48,966 - MainThread - ########################################################## 2023-07-21 08:52:48,966 - MainThread - ########################################################## 2023-07-21 08:52:48,967 - MainThread - Video will be created when printing ends 2023-07-21 08:52:48,967 - MainThread - or if requested from the UI or M291 "DuetLapse3.completed" S2 2023-07-21 08:52:48,967 - MainThread - ########################################################## 2023-07-21 08:52:48,967 - MainThread - ########################################################## 2023-07-21 08:52:48,967 - MainThread - If running from a console using the command line 2023-07-21 08:52:48,968 - MainThread - Press Ctrl+C one time to stop the program and create a video. 2023-07-21 08:52:48,968 - MainThread - ########################################################## 2023-07-21 08:52:48,968 - MainThread - ***** Initializing state and counters ***** 2023-07-21 08:52:48,970 - MainThread - ########################################################## 2023-07-21 08:52:48,970 - MainThread - ***** Started http listener ***** 2023-07-21 08:52:48,971 - MainThread - ########################################################## 2023-07-21 08:52:48,972 - MainThread - Logging in to Printer 2023-07-21 08:52:48,972 - MainThread - 0 url: http://192.168.1.128/rr_disconnect post: False 2023-07-21 08:52:50,017 - MainThread - 1 url: http://192.168.1.128/rr_disconnect post: False 2023-07-21 08:52:50,675 - Thread-1 - !!!!! http call: {} !!!!! 2023-07-21 08:52:50,705 - Thread-2 - !!!!! http call: {'displayFiles': ['/opt/dsf/sd/DuetLapse3/Vega600/192-168-1-128/6114_1']} !!!!! 2023-07-21 08:52:50,706 - Thread-2 - list_dir called with path = /opt/dsf/sd/DuetLapse3/Vega600/192-168-1-128/6114_1 2023-07-21 08:52:50,707 - Thread-2 - Finished parsing the files directory 2023-07-21 08:52:51,097 - MainThread - 0 url: http://192.168.1.128/rr_connect?password=reprap post: False 2023-07-21 08:52:51,250 - MainThread - Connected but in emulation mode 2023-07-21 08:52:51,251 - MainThread - 0 url: http://192.168.1.128/machine/disconnect post: False 2023-07-21 08:52:52,280 - MainThread - 1 url: http://192.168.1.128/machine/disconnect post: False 2023-07-21 08:52:53,301 - MainThread - 0 url: http://192.168.1.128/machine/connect?password=reprap post: False 2023-07-21 08:52:53,336 - MainThread - !!!!! Connected to SBC printer !!!!! 2023-07-21 08:52:53,337 - MainThread - 0 url: http://192.168.1.128/machine/status post: False 2023-07-21 08:52:53,379 - Thread-3 - !!!!! http call: {'displayStatus': ['true']} !!!!! 2023-07-21 08:52:53,441 - MainThread - ############################################################### 2023-07-21 08:52:53,442 - MainThread - Connected to printer at 192.168.1.128 2023-07-21 08:52:53,443 - MainThread - Using Duet version 3.5.0-beta.4 2023-07-21 08:52:53,444 - MainThread - Using API interface SBC 2023-07-21 08:52:53,444 - MainThread - ############################################################### 2023-07-21 08:52:53,447 - mainLoop - ########################### 2023-07-21 08:52:53,448 - MainThread - Initiating with action set to start 2023-07-21 08:52:53,449 - MainThread - ++++++ start state requested ++++++ 2023-07-21 08:52:53,449 - mainLoop - Starting mainLoop 2023-07-21 08:52:53,452 - mainLoop - ########################### 2023-07-21 08:52:53,452 - mainLoop - Calling function Status from mainLoop with SBC 2023-07-21 08:52:53,450 - MainThread - nextAction requested stopCaptureLoop 2023-07-21 08:52:53,454 - MainThread - captureLoop is not running 2023-07-21 08:52:53,453 - mainLoop - 0 url: http://192.168.1.128/machine/status post: False 2023-07-21 08:52:53,455 - MainThread - nextAction satisfied waitforCaptureLoop 2023-07-21 08:52:53,466 - MainThread - ++++++ Determining next logical action ++++++ 2023-07-21 08:52:53,467 - MainThread - ++++++ Entering start state ++++++ 2023-07-21 08:52:53,467 - MainThread - nextAction exiting normally 2023-07-21 08:52:53,555 - mainLoop - Status is idle 2023-07-21 08:52:58,561 - mainLoop - Calling function Status from mainLoop with SBC 2023-07-21 08:52:58,562 - mainLoop - 0 url: http://192.168.1.128/machine/status post: False 2023-07-21 08:52:58,659 - mainLoop - Status is idle 2023-07-21 08:53:00,299 - Thread-4 - !!!!! http call: {} !!!!! 2023-07-21 08:53:00,328 - mainLoop - ****** Duet status changed to: idle ***** 2023-07-21 08:53:00,331 - Thread-5 - !!!!! http call: {'displayStatus': ['true']} !!!!! 2023-07-21 08:53:03,665 - mainLoop - Calling function Status from mainLoop with SBC 2023-07-21 08:53:03,665 - mainLoop - 0 url: http://192.168.1.128/machine/status post: False 2023-07-21 08:53:03,758 - mainLoop - Status is idle 2023-07-21 08:53:08,037 - Thread-6 - !!!!! http call: {'displayFiles': ['true']} !!!!! 2023-07-21 08:53:08,038 - Thread-6 - list_dir called with path = /opt/dsf/sd/DuetLapse3/Vega600/192-168-1-128 2023-07-21 08:53:08,039 - Thread-6 - Finished parsing the files directory 2023-07-21 08:53:08,764 - mainLoop - Calling function Status from mainLoop with SBC 2023-07-21 08:53:08,765 - mainLoop - 0 url: http://192.168.1.128/machine/status post: False 2023-07-21 08:53:08,862 - mainLoop - Status is idle 2023-07-21 08:53:13,523 - Thread-7 - !!!!! http call: {'delete': ['/opt/dsf/sd/DuetLapse3/Vega600/192-168-1-128/6114_1.log']} !!!!! 2023-07-21 08:53:13,524 - Thread-7 - Deleted file /opt/dsf/sd/DuetLapse3/Vega600/192-168-1-128/6114_1.log 2023-07-21 08:53:13,543 - Thread-8 - !!!!! http call: {'displayFiles': ['true']} !!!!! 2023-07-21 08:53:13,544 - Thread-8 - list_dir called with path = /opt/dsf/sd/DuetLapse3/Vega600/192-168-1-128 2023-07-21 08:53:13,546 - Thread-8 - Finished parsing the files directory 2023-07-21 08:53:13,867 - mainLoop - Calling function Status from mainLoop with SBC 2023-07-21 08:53:13,869 - mainLoop - 0 url: http://192.168.1.128/machine/status post: False 2023-07-21 08:53:13,976 - mainLoop - Status is idle 2023-07-21 08:53:16,304 - Thread-9 - !!!!! http call: {'delete': ['/opt/dsf/sd/DuetLapse3/Vega600/192-168-1-128/6114_1']} !!!!! 2023-07-21 08:53:16,339 - Thread-10 - !!!!! http call: {'displayFiles': ['true']} !!!!! 2023-07-21 08:53:16,339 - Thread-10 - list_dir called with path = /opt/dsf/sd/DuetLapse3/Vega600/192-168-1-128 2023-07-21 08:53:16,340 - Thread-10 - Finished parsing the files directory 2023-07-21 08:53:17,098 - Thread-11 - !!!!! http call: {'getfile': ['/opt/dsf/sd/DuetLapse3/Vega600/192-168-1-128/startup.log']} !!!!! 2023-07-21 08:53:17,099 - Thread-11 - Trying to get file /opt/dsf/sd/DuetLapse3/Vega600/192-168-1-128/startup.log 2023-07-21 08:53:17,100 - Thread-11 - application/octet-stream