2023-02-07 09:43:57,113 - MainThread - DuetLapse3 Version --- 5.0.3 2023-02-07 09:43:57,114 - MainThread - Logfile --- /home/pi/ftp/files/DuetLapse/octopi/192-168-1-8/startup.log 2023-02-07 09:43:57,115 - MainThread - Process Id --- 598 2023-02-07 09:43:57,115 - MainThread - ------------------------------------------------------------------------------- 2023-02-07 09:43:57,116 - MainThread - ################### Options at start of this print job ##################### 2023-02-07 09:43:57,116 - MainThread - # Environment 2023-02-07 09:43:57,116 - MainThread - -duet = 192.168.1.8 2023-02-07 09:43:57,117 - MainThread - -basedir = /home/pi/ftp/files/DuetLapse 2023-02-07 09:43:57,117 - MainThread - -poll = 10.0 2023-02-07 09:43:57,117 - MainThread - -instances = single 2023-02-07 09:43:57,117 - MainThread - -logtype = both 2023-02-07 09:43:57,118 - MainThread - -nolog = False 2023-02-07 09:43:57,118 - MainThread - -verbose = True 2023-02-07 09:43:57,118 - MainThread - -host = 0.0.0.0 2023-02-07 09:43:57,118 - MainThread - -port = 8086 2023-02-07 09:43:57,119 - MainThread - -keeplogs = False 2023-02-07 09:43:57,119 - MainThread - -novideo = False 2023-02-07 09:43:57,119 - MainThread - -deletepics = True 2023-02-07 09:43:57,119 - MainThread - -maxffmpeg = 2 2023-02-07 09:43:57,120 - MainThread - -keepfiles = False 2023-02-07 09:43:57,120 - MainThread - # Execution 2023-02-07 09:43:57,120 - MainThread - -dontwait = False 2023-02-07 09:43:57,121 - MainThread - -seconds = 20 2023-02-07 09:43:57,121 - MainThread - -detect = none 2023-02-07 09:43:57,121 - MainThread - -pause = no 2023-02-07 09:43:57,121 - MainThread - -movehead = [0, 0] 2023-02-07 09:43:57,122 - MainThread - -rest = 1 2023-02-07 09:43:57,122 - MainThread - -standby = True 2023-02-07 09:43:57,123 - MainThread - -restart = True 2023-02-07 09:43:57,123 - MainThread - # Camera 2023-02-07 09:43:57,123 - MainThread - -camera1 = stream 2023-02-07 09:43:57,124 - MainThread - -camera2 2023-02-07 09:43:57,124 - MainThread - -weburl1 = http://cam.local:8081 2023-02-07 09:43:57,124 - MainThread - -weburl2 2023-02-07 09:43:57,125 - MainThread - # Video 2023-02-07 09:43:57,125 - MainThread - -extratime = 2 2023-02-07 09:43:57,125 - MainThread - -fps = 10 2023-02-07 09:43:57,126 - MainThread - -minvideo = 3 2023-02-07 09:43:57,126 - MainThread - -maxvideo = 12 2023-02-07 09:43:57,126 - MainThread - # Overrides 2023-02-07 09:43:57,126 - MainThread - -camparam1 2023-02-07 09:43:57,127 - MainThread - -camparam2 2023-02-07 09:43:57,127 - MainThread - -vidparam1 2023-02-07 09:43:57,127 - MainThread - -vidparam2 2023-02-07 09:43:57,127 - MainThread - # UI 2023-02-07 09:43:57,128 - MainThread - -hidebuttons = False 2023-02-07 09:43:57,128 - MainThread - # Special Functions 2023-02-07 09:43:57,128 - MainThread - -execkey 2023-02-07 09:43:57,129 - MainThread - ----------------------------------------------------------------------- 2023-02-07 09:43:57,129 - MainThread - ************************************************************************************ 2023-02-07 09:43:57,129 - MainThread - Warning: -seconds 20 and -detect none 2023-02-07 09:43:57,130 - MainThread - This combination implies -dontwait and will be set automatically 2023-02-07 09:43:57,130 - MainThread - ************************************************************************************ 2023-02-07 09:43:57,131 - MainThread - ########################################################## 2023-02-07 09:43:57,132 - MainThread - Will not start until command=start received from http listener 2023-02-07 09:43:57,132 - MainThread - or M117 DuetLapse3.start send in gcode 2023-02-07 09:43:57,132 - MainThread - ########################################################## 2023-02-07 09:43:57,133 - MainThread - ########################################################## 2023-02-07 09:43:57,133 - MainThread - Video will be created when printing ends 2023-02-07 09:43:57,133 - MainThread - or if requested from the browser interface or M117 DuetLapse3. message 2023-02-07 09:43:57,133 - MainThread - ########################################################## 2023-02-07 09:43:57,134 - MainThread - ########################################################## 2023-02-07 09:43:57,134 - MainThread - If running from a console using the command line 2023-02-07 09:43:57,134 - MainThread - Press Ctrl+C one time to stop the program and create a video. 2023-02-07 09:43:57,134 - MainThread - ########################################################## 2023-02-07 09:43:57,135 - MainThread - ***** Initializing state and counters ***** 2023-02-07 09:43:57,137 - MainThread - ########################################################## 2023-02-07 09:43:57,137 - MainThread - ***** Started http listener ***** 2023-02-07 09:43:57,138 - MainThread - ########################################################## 2023-02-07 09:43:57,138 - MainThread - url: http://192.168.1.8/rr_model?key=boards post: False 2023-02-07 09:43:57,222 - MainThread - ############################################################### 2023-02-07 09:43:57,226 - MainThread - Connected to printer at 192.168.1.8 2023-02-07 09:43:57,227 - MainThread - Using Duet version 3.4.5 2023-02-07 09:43:57,227 - MainThread - Using API interface rr_model 2023-02-07 09:43:57,227 - MainThread - ############################################################### 2023-02-07 09:43:57,228 - MainThread - url: http://192.168.1.8/rr_gcode?gcode=M117 "" post: False 2023-02-07 09:43:57,248 - gcodeLoop - ########################### 2023-02-07 09:43:57,248 - gcodeLoop - Starting gcode Listener 2023-02-07 09:43:57,249 - MainThread - Initiating with action set to standby 2023-02-07 09:43:57,250 - gcodeLoop - ########################### 2023-02-07 09:43:57,250 - MainThread - ++++++ standby state requested ++++++ 2023-02-07 09:43:57,250 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:43:57,251 - MainThread - nextAction requested stopCaptureLoop 2023-02-07 09:43:57,251 - gcodeLoop - Getting Status 2023-02-07 09:43:57,251 - MainThread - captureLoop is not running 2023-02-07 09:43:57,252 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:43:57,252 - MainThread - nextAction satisfied waitforCaptureLoop 2023-02-07 09:43:57,258 - MainThread - ++++++ Determining next logical action ++++++ 2023-02-07 09:43:57,258 - MainThread - ***** Cleaning up files for phase: standby ***** 2023-02-07 09:43:57,325 - MainThread - ***** Initializing state and counters ***** 2023-02-07 09:43:57,326 - MainThread - ++++++ Entering standby state ++++++ 2023-02-07 09:43:57,326 - MainThread - nextAction exiting normally 2023-02-07 09:44:02,282 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:44:02,283 - gcodeLoop - Getting Status 2023-02-07 09:44:02,283 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:44:07,322 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:44:07,323 - gcodeLoop - Getting Status 2023-02-07 09:44:07,324 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:44:12,441 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:44:12,441 - gcodeLoop - Getting Status 2023-02-07 09:44:12,442 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:44:32,896 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:44:32,897 - gcodeLoop - Getting Status 2023-02-07 09:44:32,902 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:44:37,933 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:44:37,934 - gcodeLoop - Getting Status 2023-02-07 09:44:37,934 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:44:42,964 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:44:42,965 - gcodeLoop - Getting Status 2023-02-07 09:44:42,965 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:44:47,990 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:44:47,991 - gcodeLoop - Getting Status 2023-02-07 09:44:47,991 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:44:53,021 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:44:53,022 - gcodeLoop - Getting Status 2023-02-07 09:44:53,022 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:44:58,054 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:44:58,055 - gcodeLoop - Getting Status 2023-02-07 09:44:58,055 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:45:03,092 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:45:03,093 - gcodeLoop - Getting Status 2023-02-07 09:45:03,097 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:45:08,133 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:45:08,133 - gcodeLoop - Getting Status 2023-02-07 09:45:08,136 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:45:13,163 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:45:13,164 - gcodeLoop - Getting Status 2023-02-07 09:45:13,166 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:45:18,195 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:45:18,196 - gcodeLoop - Getting Status 2023-02-07 09:45:18,198 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:45:23,238 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:45:23,239 - gcodeLoop - Getting Status 2023-02-07 09:45:23,240 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:45:28,274 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:45:28,275 - gcodeLoop - Getting Status 2023-02-07 09:45:28,276 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:45:33,313 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:45:33,314 - gcodeLoop - Getting Status 2023-02-07 09:45:33,317 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:45:38,352 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:45:38,353 - gcodeLoop - Getting Status 2023-02-07 09:45:38,353 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:45:43,388 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:45:43,389 - gcodeLoop - Getting Status 2023-02-07 09:45:43,390 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:45:48,430 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:45:48,431 - gcodeLoop - Getting Status 2023-02-07 09:45:48,433 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:45:53,462 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:45:53,462 - gcodeLoop - Getting Status 2023-02-07 09:45:53,463 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:45:58,494 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:45:58,496 - gcodeLoop - Getting Status 2023-02-07 09:45:58,497 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:46:03,542 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:46:03,544 - gcodeLoop - Getting Status 2023-02-07 09:46:03,544 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:46:08,621 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:46:08,622 - gcodeLoop - Getting Status 2023-02-07 09:46:08,623 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:46:13,662 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:46:13,663 - gcodeLoop - Getting Status 2023-02-07 09:46:13,664 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:46:18,696 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:46:18,697 - gcodeLoop - Getting Status 2023-02-07 09:46:18,697 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:46:23,736 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:46:23,737 - gcodeLoop - Getting Status 2023-02-07 09:46:23,744 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:46:31,185 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:46:31,186 - gcodeLoop - Getting Status 2023-02-07 09:46:31,186 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:46:36,221 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:46:36,222 - gcodeLoop - Getting Status 2023-02-07 09:46:36,222 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:46:41,257 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:46:41,258 - gcodeLoop - Getting Status 2023-02-07 09:46:41,262 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:46:46,299 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:46:46,300 - gcodeLoop - Getting Status 2023-02-07 09:46:46,303 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:46:51,349 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:46:51,350 - gcodeLoop - Getting Status 2023-02-07 09:46:51,350 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:46:56,378 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:46:56,378 - gcodeLoop - Getting Status 2023-02-07 09:46:56,381 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:47:01,409 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:47:01,410 - gcodeLoop - Getting Status 2023-02-07 09:47:01,413 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:47:06,452 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:47:06,453 - gcodeLoop - Getting Status 2023-02-07 09:47:06,454 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:47:11,496 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:47:11,498 - gcodeLoop - Getting Status 2023-02-07 09:47:11,501 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:47:16,537 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:47:16,538 - gcodeLoop - Getting Status 2023-02-07 09:47:16,540 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:47:21,578 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:47:21,579 - gcodeLoop - Getting Status 2023-02-07 09:47:21,582 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:47:26,611 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:47:26,612 - gcodeLoop - Getting Status 2023-02-07 09:47:26,615 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:47:28,946 - Thread-1 - !!!!! http call: {} !!!!! 2023-02-07 09:47:29,477 - Thread-4 - !!!!! http call: {'displayStatus': ['true']} !!!!! 2023-02-07 09:47:31,649 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:47:31,650 - gcodeLoop - Getting Status 2023-02-07 09:47:31,651 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:47:34,217 - Thread-13 - !!!!! http call: {'displayStatus': ['true']} !!!!! 2023-02-07 09:47:36,685 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:47:36,686 - gcodeLoop - Getting Status 2023-02-07 09:47:36,686 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:47:39,779 - Thread-14 - !!!!! http call: {'displayStatus': ['true']} !!!!! 2023-02-07 09:47:41,717 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:47:41,718 - gcodeLoop - Getting Status 2023-02-07 09:47:41,718 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:47:44,850 - Thread-15 - !!!!! http call: {'displayStatus': ['true']} !!!!! 2023-02-07 09:47:46,756 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:47:46,757 - gcodeLoop - Getting Status 2023-02-07 09:47:46,761 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:47:49,864 - Thread-16 - !!!!! http call: {'displayStatus': ['true']} !!!!! 2023-02-07 09:47:51,803 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:47:51,804 - gcodeLoop - Getting Status 2023-02-07 09:47:51,805 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:47:54,921 - Thread-17 - !!!!! http call: {'displayStatus': ['true']} !!!!! 2023-02-07 09:47:56,841 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:47:56,842 - gcodeLoop - Getting Status 2023-02-07 09:47:56,843 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:47:59,959 - Thread-18 - !!!!! http call: {'displayStatus': ['true']} !!!!! 2023-02-07 09:48:01,878 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:48:01,879 - gcodeLoop - Getting Status 2023-02-07 09:48:01,882 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:48:05,004 - Thread-19 - !!!!! http call: {'displayStatus': ['true']} !!!!! 2023-02-07 09:48:06,917 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:48:06,918 - gcodeLoop - Getting Status 2023-02-07 09:48:06,920 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:48:10,058 - Thread-20 - !!!!! http call: {'displayStatus': ['true']} !!!!! 2023-02-07 09:48:11,956 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:48:11,957 - gcodeLoop - Getting Status 2023-02-07 09:48:11,959 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:48:15,869 - Thread-21 - !!!!! http call: {'displayStatus': ['true']} !!!!! 2023-02-07 09:48:16,992 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:48:16,992 - gcodeLoop - Getting Status 2023-02-07 09:48:16,993 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:48:20,937 - Thread-22 - !!!!! http call: {'displayStatus': ['true']} !!!!! 2023-02-07 09:48:22,039 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:48:22,040 - gcodeLoop - Getting Status 2023-02-07 09:48:22,040 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:48:25,984 - Thread-23 - !!!!! http call: {'displayStatus': ['true']} !!!!! 2023-02-07 09:48:27,076 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:48:27,078 - gcodeLoop - Getting Status 2023-02-07 09:48:27,080 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:48:32,122 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:48:32,122 - gcodeLoop - Getting Status 2023-02-07 09:48:32,125 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:48:32,284 - Thread-24 - !!!!! http call: {'displayStatus': ['true']} !!!!! 2023-02-07 09:48:36,349 - Thread-25 - !!!!! http call: {'displayStatus': ['true']} !!!!! 2023-02-07 09:48:37,162 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:48:37,162 - gcodeLoop - Getting Status 2023-02-07 09:48:37,163 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:48:41,489 - Thread-26 - !!!!! http call: {'displayStatus': ['true']} !!!!! 2023-02-07 09:48:42,198 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:48:42,199 - gcodeLoop - Getting Status 2023-02-07 09:48:42,202 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:48:46,875 - Thread-27 - !!!!! http call: {'displayStatus': ['true']} !!!!! 2023-02-07 09:48:47,232 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:48:47,233 - gcodeLoop - Getting Status 2023-02-07 09:48:47,236 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:48:51,934 - Thread-28 - !!!!! http call: {'displayStatus': ['true']} !!!!! 2023-02-07 09:48:52,271 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:48:52,272 - gcodeLoop - Getting Status 2023-02-07 09:48:52,273 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:48:56,982 - Thread-29 - !!!!! http call: {'displayStatus': ['true']} !!!!! 2023-02-07 09:48:57,312 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:48:57,312 - gcodeLoop - Getting Status 2023-02-07 09:48:57,313 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:49:02,040 - Thread-30 - !!!!! http call: {'displayStatus': ['true']} !!!!! 2023-02-07 09:49:02,347 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:49:02,348 - gcodeLoop - Getting Status 2023-02-07 09:49:02,351 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:49:07,098 - Thread-31 - !!!!! http call: {'displayStatus': ['true']} !!!!! 2023-02-07 09:49:07,388 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:49:07,389 - gcodeLoop - Getting Status 2023-02-07 09:49:07,392 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:49:12,153 - Thread-32 - !!!!! http call: {'displayStatus': ['true']} !!!!! 2023-02-07 09:49:12,426 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:49:12,427 - gcodeLoop - Getting Status 2023-02-07 09:49:12,429 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:49:17,208 - Thread-33 - !!!!! http call: {'displayStatus': ['true']} !!!!! 2023-02-07 09:49:17,476 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:49:17,477 - gcodeLoop - Getting Status 2023-02-07 09:49:17,480 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:49:22,260 - Thread-34 - !!!!! http call: {'displayStatus': ['true']} !!!!! 2023-02-07 09:49:22,514 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:49:22,515 - gcodeLoop - Getting Status 2023-02-07 09:49:22,518 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:49:27,319 - Thread-35 - !!!!! http call: {'displayStatus': ['true']} !!!!! 2023-02-07 09:49:27,556 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:49:27,557 - gcodeLoop - Getting Status 2023-02-07 09:49:27,560 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:49:32,376 - Thread-36 - !!!!! http call: {'displayStatus': ['true']} !!!!! 2023-02-07 09:49:32,596 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:49:32,597 - gcodeLoop - Getting Status 2023-02-07 09:49:32,600 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:49:37,623 - Thread-37 - !!!!! http call: {'displayStatus': ['true']} !!!!! 2023-02-07 09:49:37,635 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:49:37,635 - gcodeLoop - Getting Status 2023-02-07 09:49:37,636 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:49:42,661 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:49:42,665 - gcodeLoop - Getting Status 2023-02-07 09:49:42,666 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:49:42,678 - Thread-38 - !!!!! http call: {'displayStatus': ['true']} !!!!! 2023-02-07 09:49:47,699 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:49:47,699 - gcodeLoop - Getting Status 2023-02-07 09:49:47,700 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:49:47,725 - Thread-39 - !!!!! http call: {'displayStatus': ['true']} !!!!! 2023-02-07 09:49:52,744 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:49:52,745 - gcodeLoop - Getting Status 2023-02-07 09:49:52,748 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:49:52,902 - Thread-40 - !!!!! http call: {'displayStatus': ['true']} !!!!! 2023-02-07 09:49:57,786 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:49:57,786 - gcodeLoop - Getting Status 2023-02-07 09:49:57,787 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:49:57,954 - Thread-41 - !!!!! http call: {'displayStatus': ['true']} !!!!! 2023-02-07 09:50:02,821 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:50:02,822 - gcodeLoop - Getting Status 2023-02-07 09:50:02,823 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:50:03,010 - Thread-42 - !!!!! http call: {'displayStatus': ['true']} !!!!! 2023-02-07 09:50:07,858 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:50:07,859 - gcodeLoop - Getting Status 2023-02-07 09:50:07,862 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:50:08,064 - Thread-43 - !!!!! http call: {'displayStatus': ['true']} !!!!! 2023-02-07 09:50:12,894 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:50:12,895 - gcodeLoop - Getting Status 2023-02-07 09:50:12,899 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:50:13,211 - Thread-44 - !!!!! http call: {'displayStatus': ['true']} !!!!! 2023-02-07 09:50:17,959 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:50:17,960 - gcodeLoop - Getting Status 2023-02-07 09:50:17,962 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:50:18,270 - Thread-45 - !!!!! http call: {'displayStatus': ['true']} !!!!! 2023-02-07 09:50:22,996 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:50:22,997 - gcodeLoop - Getting Status 2023-02-07 09:50:22,998 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:50:23,322 - Thread-46 - !!!!! http call: {'displayStatus': ['true']} !!!!! 2023-02-07 09:50:28,040 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:50:28,041 - gcodeLoop - Getting Status 2023-02-07 09:50:28,041 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:50:28,377 - Thread-47 - !!!!! http call: {'displayStatus': ['true']} !!!!! 2023-02-07 09:50:33,068 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:50:33,069 - gcodeLoop - Getting Status 2023-02-07 09:50:33,072 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:50:33,429 - Thread-48 - !!!!! http call: {'displayStatus': ['true']} !!!!! 2023-02-07 09:50:38,107 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:50:38,107 - gcodeLoop - Getting Status 2023-02-07 09:50:38,117 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:50:38,480 - Thread-49 - !!!!! http call: {'displayStatus': ['true']} !!!!! 2023-02-07 09:50:43,152 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:50:43,153 - gcodeLoop - Getting Status 2023-02-07 09:50:43,156 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:50:43,786 - Thread-50 - !!!!! http call: {'displayStatus': ['true']} !!!!! 2023-02-07 09:50:48,191 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:50:48,192 - gcodeLoop - Getting Status 2023-02-07 09:50:48,194 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:50:48,861 - Thread-51 - !!!!! http call: {'displayStatus': ['true']} !!!!! 2023-02-07 09:50:53,222 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:50:53,223 - gcodeLoop - Getting Status 2023-02-07 09:50:53,223 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:50:53,925 - Thread-52 - !!!!! http call: {'displayStatus': ['true']} !!!!! 2023-02-07 09:50:58,252 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:50:58,252 - gcodeLoop - Getting Status 2023-02-07 09:50:58,255 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:50:58,989 - Thread-53 - !!!!! http call: {'displayStatus': ['true']} !!!!! 2023-02-07 09:51:03,295 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:51:03,296 - gcodeLoop - Getting Status 2023-02-07 09:51:03,299 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:51:04,030 - Thread-54 - !!!!! http call: {'displayStatus': ['true']} !!!!! 2023-02-07 09:51:08,336 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:51:08,337 - gcodeLoop - Getting Status 2023-02-07 09:51:08,340 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:51:09,102 - Thread-55 - !!!!! http call: {'displayStatus': ['true']} !!!!! 2023-02-07 09:51:13,373 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:51:13,374 - gcodeLoop - Getting Status 2023-02-07 09:51:13,377 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:51:14,153 - Thread-56 - !!!!! http call: {'displayStatus': ['true']} !!!!! 2023-02-07 09:51:18,416 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:51:18,417 - gcodeLoop - Getting Status 2023-02-07 09:51:18,420 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:51:19,215 - Thread-57 - !!!!! http call: {'displayStatus': ['true']} !!!!! 2023-02-07 09:51:23,454 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:51:23,455 - gcodeLoop - Getting Status 2023-02-07 09:51:23,457 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:51:24,285 - Thread-58 - !!!!! http call: {'displayStatus': ['true']} !!!!! 2023-02-07 09:51:28,494 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:51:28,495 - gcodeLoop - Getting Status 2023-02-07 09:51:28,498 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:51:29,356 - Thread-59 - !!!!! http call: {'displayStatus': ['true']} !!!!! 2023-02-07 09:51:33,538 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:51:33,539 - gcodeLoop - Getting Status 2023-02-07 09:51:33,543 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:51:34,408 - Thread-60 - !!!!! http call: {'displayStatus': ['true']} !!!!! 2023-02-07 09:51:38,578 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:51:38,578 - gcodeLoop - Getting Status 2023-02-07 09:51:38,581 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:51:39,485 - Thread-61 - !!!!! http call: {'displayStatus': ['true']} !!!!! 2023-02-07 09:51:43,954 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:51:43,955 - gcodeLoop - Getting Status 2023-02-07 09:51:43,955 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:51:44,541 - Thread-62 - !!!!! http call: {'displayStatus': ['true']} !!!!! 2023-02-07 09:51:48,998 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:51:48,999 - gcodeLoop - Getting Status 2023-02-07 09:51:49,004 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:51:49,829 - Thread-63 - !!!!! http call: {'displayStatus': ['true']} !!!!! 2023-02-07 09:51:54,043 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:51:54,044 - gcodeLoop - Getting Status 2023-02-07 09:51:54,047 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:51:54,888 - Thread-64 - !!!!! http call: {'displayStatus': ['true']} !!!!! 2023-02-07 09:51:59,081 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:51:59,082 - gcodeLoop - Getting Status 2023-02-07 09:51:59,087 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:52:00,019 - Thread-65 - !!!!! http call: {'displayStatus': ['true']} !!!!! 2023-02-07 09:52:04,134 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:52:04,135 - gcodeLoop - Getting Status 2023-02-07 09:52:04,136 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:52:05,096 - Thread-66 - !!!!! http call: {'displayStatus': ['true']} !!!!! 2023-02-07 09:52:09,168 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:52:09,169 - gcodeLoop - Getting Status 2023-02-07 09:52:09,170 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:52:10,235 - Thread-67 - !!!!! http call: {'displayStatus': ['true']} !!!!! 2023-02-07 09:52:14,205 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:52:14,206 - gcodeLoop - Getting Status 2023-02-07 09:52:14,209 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:52:15,308 - Thread-68 - !!!!! http call: {'displayStatus': ['true']} !!!!! 2023-02-07 09:52:19,254 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:52:19,255 - gcodeLoop - Getting Status 2023-02-07 09:52:19,255 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:52:20,382 - Thread-69 - !!!!! http call: {'displayStatus': ['true']} !!!!! 2023-02-07 09:52:24,293 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:52:24,293 - gcodeLoop - Getting Status 2023-02-07 09:52:24,294 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:52:25,443 - Thread-70 - !!!!! http call: {'displayStatus': ['true']} !!!!! 2023-02-07 09:52:29,325 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:52:29,326 - gcodeLoop - Getting Status 2023-02-07 09:52:29,327 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:52:30,617 - Thread-71 - !!!!! http call: {'displayStatus': ['true']} !!!!! 2023-02-07 09:52:34,366 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:52:34,366 - gcodeLoop - Getting Status 2023-02-07 09:52:34,367 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:52:35,752 - Thread-72 - !!!!! http call: {'displayStatus': ['true']} !!!!! 2023-02-07 09:52:39,395 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:52:39,396 - gcodeLoop - Getting Status 2023-02-07 09:52:39,397 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:52:40,816 - Thread-73 - !!!!! http call: {'displayStatus': ['true']} !!!!! 2023-02-07 09:52:44,429 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:52:44,430 - gcodeLoop - Getting Status 2023-02-07 09:52:44,430 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:52:45,889 - Thread-74 - !!!!! http call: {'displayStatus': ['true']} !!!!! 2023-02-07 09:52:49,467 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:52:49,468 - gcodeLoop - Getting Status 2023-02-07 09:52:49,469 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:52:51,165 - Thread-75 - !!!!! http call: {'displayStatus': ['true']} !!!!! 2023-02-07 09:52:54,506 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:52:54,507 - gcodeLoop - Getting Status 2023-02-07 09:52:54,508 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:52:56,211 - Thread-76 - !!!!! http call: {'displayStatus': ['true']} !!!!! 2023-02-07 09:52:59,545 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:52:59,546 - gcodeLoop - Getting Status 2023-02-07 09:52:59,549 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:53:01,270 - Thread-77 - !!!!! http call: {'displayStatus': ['true']} !!!!! 2023-02-07 09:53:04,586 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:53:04,587 - gcodeLoop - Getting Status 2023-02-07 09:53:04,587 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:53:06,340 - Thread-78 - !!!!! http call: {'displayStatus': ['true']} !!!!! 2023-02-07 09:53:09,615 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:53:09,617 - gcodeLoop - Getting Status 2023-02-07 09:53:09,617 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:53:11,406 - Thread-79 - !!!!! http call: {'displayStatus': ['true']} !!!!! 2023-02-07 09:53:14,653 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:53:14,654 - gcodeLoop - Getting Status 2023-02-07 09:53:14,654 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:53:16,483 - Thread-80 - !!!!! http call: {'displayStatus': ['true']} !!!!! 2023-02-07 09:53:19,686 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:53:19,686 - gcodeLoop - Getting Status 2023-02-07 09:53:19,687 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:53:21,543 - Thread-81 - !!!!! http call: {'displayStatus': ['true']} !!!!! 2023-02-07 09:53:24,719 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:53:24,720 - gcodeLoop - Getting Status 2023-02-07 09:53:24,723 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:53:26,666 - Thread-82 - !!!!! http call: {'displayStatus': ['true']} !!!!! 2023-02-07 09:53:29,778 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:53:29,778 - gcodeLoop - Getting Status 2023-02-07 09:53:29,781 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:53:31,719 - Thread-83 - !!!!! http call: {'displayStatus': ['true']} !!!!! 2023-02-07 09:53:34,806 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:53:34,807 - gcodeLoop - Getting Status 2023-02-07 09:53:34,810 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:53:36,776 - Thread-84 - !!!!! http call: {'displayStatus': ['true']} !!!!! 2023-02-07 09:53:39,840 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:53:39,841 - gcodeLoop - Getting Status 2023-02-07 09:53:39,843 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:53:41,853 - Thread-85 - !!!!! http call: {'displayStatus': ['true']} !!!!! 2023-02-07 09:53:44,875 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:53:44,875 - gcodeLoop - Getting Status 2023-02-07 09:53:44,876 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:53:46,918 - Thread-86 - !!!!! http call: {'displayStatus': ['true']} !!!!! 2023-02-07 09:53:49,903 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:53:49,904 - gcodeLoop - Getting Status 2023-02-07 09:53:49,909 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:53:51,982 - Thread-87 - !!!!! http call: {'displayStatus': ['true']} !!!!! 2023-02-07 09:53:54,939 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:53:54,939 - gcodeLoop - Getting Status 2023-02-07 09:53:54,943 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:53:57,313 - Thread-88 - !!!!! http call: {'displayStatus': ['true']} !!!!! 2023-02-07 09:53:59,976 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:53:59,977 - gcodeLoop - Getting Status 2023-02-07 09:53:59,980 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:54:02,386 - Thread-89 - !!!!! http call: {'displayStatus': ['true']} !!!!! 2023-02-07 09:54:05,028 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:54:05,029 - gcodeLoop - Getting Status 2023-02-07 09:54:05,032 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:54:07,466 - Thread-90 - !!!!! http call: {'displayStatus': ['true']} !!!!! 2023-02-07 09:54:10,069 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:54:10,070 - gcodeLoop - Getting Status 2023-02-07 09:54:10,076 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:54:12,531 - Thread-91 - !!!!! http call: {'displayStatus': ['true']} !!!!! 2023-02-07 09:54:15,110 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:54:15,111 - gcodeLoop - Getting Status 2023-02-07 09:54:15,115 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:54:17,611 - Thread-92 - !!!!! http call: {'displayStatus': ['true']} !!!!! 2023-02-07 09:54:20,151 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:54:20,152 - gcodeLoop - Getting Status 2023-02-07 09:54:20,152 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:54:22,664 - Thread-93 - !!!!! http call: {'displayStatus': ['true']} !!!!! 2023-02-07 09:54:25,183 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:54:25,184 - gcodeLoop - Getting Status 2023-02-07 09:54:25,188 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:54:27,715 - Thread-94 - !!!!! http call: {'displayStatus': ['true']} !!!!! 2023-02-07 09:54:30,215 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:54:30,216 - gcodeLoop - Getting Status 2023-02-07 09:54:30,217 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:54:32,776 - Thread-95 - !!!!! http call: {'displayStatus': ['true']} !!!!! 2023-02-07 09:54:35,258 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:54:35,259 - gcodeLoop - Getting Status 2023-02-07 09:54:35,263 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:54:37,854 - Thread-96 - !!!!! http call: {'displayStatus': ['true']} !!!!! 2023-02-07 09:54:40,299 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:54:40,300 - gcodeLoop - Getting Status 2023-02-07 09:54:40,300 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:54:42,926 - Thread-97 - !!!!! http call: {'displayStatus': ['true']} !!!!! 2023-02-07 09:54:45,336 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:54:45,337 - gcodeLoop - Getting Status 2023-02-07 09:54:45,338 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:54:47,989 - Thread-98 - !!!!! http call: {'displayStatus': ['true']} !!!!! 2023-02-07 09:54:50,372 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:54:50,373 - gcodeLoop - Getting Status 2023-02-07 09:54:50,375 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:54:53,047 - Thread-99 - !!!!! http call: {'displayStatus': ['true']} !!!!! 2023-02-07 09:54:55,421 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:54:55,422 - gcodeLoop - Getting Status 2023-02-07 09:54:55,423 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:54:58,106 - Thread-100 - !!!!! http call: {'displayStatus': ['true']} !!!!! 2023-02-07 09:55:00,472 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:55:00,473 - gcodeLoop - Getting Status 2023-02-07 09:55:00,479 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:55:03,359 - Thread-101 - !!!!! http call: {'displayStatus': ['true']} !!!!! 2023-02-07 09:55:05,516 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:55:05,516 - gcodeLoop - Getting Status 2023-02-07 09:55:05,519 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:55:08,409 - Thread-102 - !!!!! http call: {'displayStatus': ['true']} !!!!! 2023-02-07 09:55:10,546 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:55:10,547 - gcodeLoop - Getting Status 2023-02-07 09:55:10,548 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:55:13,487 - Thread-103 - !!!!! http call: {'displayStatus': ['true']} !!!!! 2023-02-07 09:55:15,582 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:55:15,583 - gcodeLoop - Getting Status 2023-02-07 09:55:15,584 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:55:18,552 - Thread-104 - !!!!! http call: {'displayStatus': ['true']} !!!!! 2023-02-07 09:55:20,645 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:55:20,646 - gcodeLoop - Getting Status 2023-02-07 09:55:20,649 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:55:23,594 - Thread-105 - !!!!! http call: {'displayStatus': ['true']} !!!!! 2023-02-07 09:55:25,699 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:55:25,702 - gcodeLoop - Getting Status 2023-02-07 09:55:25,703 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:55:28,661 - Thread-106 - !!!!! http call: {'displayStatus': ['true']} !!!!! 2023-02-07 09:55:30,754 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:55:30,755 - gcodeLoop - Getting Status 2023-02-07 09:55:30,759 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:55:33,729 - Thread-107 - !!!!! http call: {'displayStatus': ['true']} !!!!! 2023-02-07 09:55:35,804 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:55:35,804 - gcodeLoop - Getting Status 2023-02-07 09:55:35,805 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:55:35,833 - gcodeLoop - url: http://192.168.1.8/rr_gcode?gcode=M117 "" post: False 2023-02-07 09:55:35,851 - gcodeLoop - M117 Command: DuetLapse3.start 2023-02-07 09:55:35,851 - gcodeLoop - M117 sending to startnextAction: start 2023-02-07 09:55:35,851 - gcodeLoop - nextAction is available 2023-02-07 09:55:35,852 - nextAction - ++++++ start state requested ++++++ 2023-02-07 09:55:35,853 - nextAction - nextAction requested stopCaptureLoop 2023-02-07 09:55:35,853 - nextAction - captureLoop is not running 2023-02-07 09:55:35,853 - nextAction - nextAction satisfied waitforCaptureLoop 2023-02-07 09:55:35,854 - nextAction - ++++++ Determining next logical action ++++++ 2023-02-07 09:55:35,854 - captureLoop - Starting Capture Loop 2023-02-07 09:55:35,854 - nextAction - ++++++ Entering start state ++++++ 2023-02-07 09:55:35,855 - captureLoop - ****** Duet status changed to: processing ***** 2023-02-07 09:55:35,855 - nextAction - nextAction exiting normally 2023-02-07 09:55:35,856 - captureLoop - ****** Print State changed to: Capturing ***** 2023-02-07 09:55:35,857 - captureLoop - ****** Print State changed to: Capturing ***** 2023-02-07 09:55:35,857 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 09:55:35,857 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 09:55:35,876 - captureLoop - elapsed: 698.5504329204559 2023-02-07 09:55:35,877 - captureLoop - Time - Camera1: capturing frame 1 at layer None after 20 seconds 2023-02-07 09:55:35,878 - captureLoop - Created working directory: /home/pi/ftp/files/DuetLapse/octopi/192-168-1-8/598_1 2023-02-07 09:55:35,880 - captureLoop - Calling function Jobname from renameworkingDir with rr_model 2023-02-07 09:55:35,880 - captureLoop - url: http://192.168.1.8/rr_model?key=job.file.fileName post: False 2023-02-07 09:55:35,897 - captureLoop - Renaming working directory: /home/pi/ftp/files/DuetLapse/octopi/192-168-1-8/598_1_printer_square_calibration 2023-02-07 09:55:37,851 - captureLoop - Command Success : ffmpeg -threads 1 -loglevel quiet -y -i http://cam.local:8081 -vframes 1 -threads 1 /home/pi/ftp/files/DuetLapse/octopi/192-168-1-8/598_1_printer_square_calibration/Camera1_00000001.jpeg 2023-02-07 09:55:37,852 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 09:55:37,852 - captureLoop - Getting Status 2023-02-07 09:55:37,852 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:55:38,795 - Thread-108 - !!!!! http call: {'displayStatus': ['true']} !!!!! 2023-02-07 09:55:38,849 - Thread-109 - !!!!! http call: {'getfile': ['/home/pi/ftp/files/DuetLapse/octopi/192-168-1-8/598_1_printer_square_calibration/Camera1_00000001.jpeg']} !!!!! 2023-02-07 09:55:38,850 - Thread-109 - Trying to get file /home/pi/ftp/files/DuetLapse/octopi/192-168-1-8/598_1_printer_square_calibration/Camera1_00000001.jpeg 2023-02-07 09:55:38,851 - Thread-109 - image/jpeg 2023-02-07 09:55:40,858 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:55:40,859 - gcodeLoop - Getting Status 2023-02-07 09:55:40,864 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:55:43,804 - Thread-110 - !!!!! http call: {'displayStatus': ['true']} !!!!! 2023-02-07 09:55:45,903 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:55:45,903 - gcodeLoop - Getting Status 2023-02-07 09:55:45,907 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:55:47,885 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 09:55:47,885 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 09:55:47,912 - captureLoop - elapsed: 10.060522556304932 2023-02-07 09:55:47,913 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 09:55:47,913 - captureLoop - Getting Status 2023-02-07 09:55:47,913 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:55:48,809 - Thread-111 - !!!!! http call: {'displayStatus': ['true']} !!!!! 2023-02-07 09:55:50,943 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:55:50,943 - gcodeLoop - Getting Status 2023-02-07 09:55:50,944 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:55:53,812 - Thread-112 - !!!!! http call: {'displayStatus': ['true']} !!!!! 2023-02-07 09:55:55,997 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:55:55,998 - gcodeLoop - Getting Status 2023-02-07 09:55:55,998 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:55:57,936 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 09:55:57,936 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 09:55:57,957 - captureLoop - elapsed: 20.10568594932556 2023-02-07 09:55:57,958 - captureLoop - Time - Camera1: capturing frame 2 at layer 1 after 20 seconds 2023-02-07 09:55:58,824 - Thread-113 - !!!!! http call: {'displayStatus': ['true']} !!!!! 2023-02-07 09:55:59,632 - captureLoop - Command Success : ffmpeg -threads 1 -loglevel quiet -y -i http://cam.local:8081 -vframes 1 -threads 1 /home/pi/ftp/files/DuetLapse/octopi/192-168-1-8/598_1_printer_square_calibration/Camera1_00000002.jpeg 2023-02-07 09:55:59,633 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 09:55:59,633 - captureLoop - Getting Status 2023-02-07 09:55:59,633 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:56:01,029 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:56:01,030 - gcodeLoop - Getting Status 2023-02-07 09:56:01,034 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:56:03,833 - Thread-114 - !!!!! http call: {'displayStatus': ['true']} !!!!! 2023-02-07 09:56:03,879 - Thread-115 - !!!!! http call: {'getfile': ['/home/pi/ftp/files/DuetLapse/octopi/192-168-1-8/598_1_printer_square_calibration/Camera1_00000002.jpeg']} !!!!! 2023-02-07 09:56:03,880 - Thread-115 - Trying to get file /home/pi/ftp/files/DuetLapse/octopi/192-168-1-8/598_1_printer_square_calibration/Camera1_00000002.jpeg 2023-02-07 09:56:03,880 - Thread-115 - image/jpeg 2023-02-07 09:56:06,077 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:56:06,078 - gcodeLoop - Getting Status 2023-02-07 09:56:06,081 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:56:09,007 - Thread-116 - !!!!! http call: {'displayStatus': ['true']} !!!!! 2023-02-07 09:56:09,667 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 09:56:09,668 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 09:56:09,692 - captureLoop - elapsed: 10.059141159057617 2023-02-07 09:56:09,692 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 09:56:09,693 - captureLoop - Getting Status 2023-02-07 09:56:09,693 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:56:11,117 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:56:11,118 - gcodeLoop - Getting Status 2023-02-07 09:56:11,119 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:56:13,856 - Thread-117 - !!!!! http call: {'displayStatus': ['true']} !!!!! 2023-02-07 09:56:16,161 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:56:16,161 - gcodeLoop - Getting Status 2023-02-07 09:56:16,165 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:56:18,875 - Thread-118 - !!!!! http call: {'displayStatus': ['true']} !!!!! 2023-02-07 09:56:19,726 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 09:56:19,727 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 09:56:19,749 - captureLoop - elapsed: 20.116539239883423 2023-02-07 09:56:19,750 - captureLoop - Time - Camera1: capturing frame 3 at layer 1 after 20 seconds 2023-02-07 09:56:21,202 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:56:21,203 - gcodeLoop - Getting Status 2023-02-07 09:56:21,207 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:56:21,478 - captureLoop - Command Success : ffmpeg -threads 1 -loglevel quiet -y -i http://cam.local:8081 -vframes 1 -threads 1 /home/pi/ftp/files/DuetLapse/octopi/192-168-1-8/598_1_printer_square_calibration/Camera1_00000003.jpeg 2023-02-07 09:56:21,479 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 09:56:21,479 - captureLoop - Getting Status 2023-02-07 09:56:21,480 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:56:23,908 - Thread-119 - !!!!! http call: {'displayStatus': ['true']} !!!!! 2023-02-07 09:56:24,030 - Thread-120 - !!!!! http call: {'getfile': ['/home/pi/ftp/files/DuetLapse/octopi/192-168-1-8/598_1_printer_square_calibration/Camera1_00000003.jpeg']} !!!!! 2023-02-07 09:56:24,030 - Thread-120 - Trying to get file /home/pi/ftp/files/DuetLapse/octopi/192-168-1-8/598_1_printer_square_calibration/Camera1_00000003.jpeg 2023-02-07 09:56:24,031 - Thread-120 - image/jpeg 2023-02-07 09:56:26,246 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:56:26,247 - gcodeLoop - Getting Status 2023-02-07 09:56:26,248 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:56:28,892 - Thread-121 - !!!!! http call: {'displayStatus': ['true']} !!!!! 2023-02-07 09:56:31,276 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:56:31,276 - gcodeLoop - Getting Status 2023-02-07 09:56:31,279 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:56:31,523 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 09:56:31,524 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 09:56:31,577 - captureLoop - elapsed: 10.097920894622803 2023-02-07 09:56:31,577 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 09:56:31,578 - captureLoop - Getting Status 2023-02-07 09:56:31,578 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:56:34,864 - Thread-122 - !!!!! http call: {'displayStatus': ['true']} !!!!! 2023-02-07 09:56:36,312 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:56:36,313 - gcodeLoop - Getting Status 2023-02-07 09:56:36,316 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:56:39,911 - Thread-123 - !!!!! http call: {'displayStatus': ['true']} !!!!! 2023-02-07 09:56:41,359 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:56:41,360 - gcodeLoop - Getting Status 2023-02-07 09:56:41,361 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:56:41,656 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 09:56:41,657 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 09:56:41,778 - captureLoop - elapsed: 20.298834800720215 2023-02-07 09:56:41,778 - captureLoop - Time - Camera1: capturing frame 4 at layer 1 after 20 seconds 2023-02-07 09:56:43,371 - captureLoop - Command Success : ffmpeg -threads 1 -loglevel quiet -y -i http://cam.local:8081 -vframes 1 -threads 1 /home/pi/ftp/files/DuetLapse/octopi/192-168-1-8/598_1_printer_square_calibration/Camera1_00000004.jpeg 2023-02-07 09:56:43,372 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 09:56:43,372 - captureLoop - Getting Status 2023-02-07 09:56:43,373 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:56:44,926 - Thread-124 - !!!!! http call: {'displayStatus': ['true']} !!!!! 2023-02-07 09:56:44,949 - Thread-125 - !!!!! http call: {'getfile': ['/home/pi/ftp/files/DuetLapse/octopi/192-168-1-8/598_1_printer_square_calibration/Camera1_00000004.jpeg']} !!!!! 2023-02-07 09:56:44,949 - Thread-125 - Trying to get file /home/pi/ftp/files/DuetLapse/octopi/192-168-1-8/598_1_printer_square_calibration/Camera1_00000004.jpeg 2023-02-07 09:56:44,950 - Thread-125 - image/jpeg 2023-02-07 09:56:46,395 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:56:46,396 - gcodeLoop - Getting Status 2023-02-07 09:56:46,400 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:56:49,979 - Thread-126 - !!!!! http call: {'displayStatus': ['true']} !!!!! 2023-02-07 09:56:51,435 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:56:51,436 - gcodeLoop - Getting Status 2023-02-07 09:56:51,439 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:56:53,431 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 09:56:53,432 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 09:56:53,464 - captureLoop - elapsed: 10.092098712921143 2023-02-07 09:56:53,465 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 09:56:53,466 - captureLoop - Getting Status 2023-02-07 09:56:53,466 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:56:55,031 - Thread-127 - !!!!! http call: {'displayStatus': ['true']} !!!!! 2023-02-07 09:56:56,479 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:56:56,480 - gcodeLoop - Getting Status 2023-02-07 09:56:56,484 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:57:00,085 - Thread-128 - !!!!! http call: {'displayStatus': ['true']} !!!!! 2023-02-07 09:57:01,516 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:57:01,516 - gcodeLoop - Getting Status 2023-02-07 09:57:01,517 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:57:03,508 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 09:57:03,509 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 09:57:03,537 - captureLoop - elapsed: 20.164809226989746 2023-02-07 09:57:03,538 - captureLoop - Time - Camera1: capturing frame 5 at layer 1 after 20 seconds 2023-02-07 09:57:05,142 - Thread-129 - !!!!! http call: {'displayStatus': ['true']} !!!!! 2023-02-07 09:57:05,246 - captureLoop - Command Success : ffmpeg -threads 1 -loglevel quiet -y -i http://cam.local:8081 -vframes 1 -threads 1 /home/pi/ftp/files/DuetLapse/octopi/192-168-1-8/598_1_printer_square_calibration/Camera1_00000005.jpeg 2023-02-07 09:57:05,247 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 09:57:05,248 - captureLoop - Getting Status 2023-02-07 09:57:05,248 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:57:06,554 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:57:06,555 - gcodeLoop - Getting Status 2023-02-07 09:57:06,555 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:57:11,223 - Thread-130 - !!!!! http call: {'displayStatus': ['true']} !!!!! 2023-02-07 09:57:11,286 - Thread-131 - !!!!! http call: {'getfile': ['/home/pi/ftp/files/DuetLapse/octopi/192-168-1-8/598_1_printer_square_calibration/Camera1_00000005.jpeg']} !!!!! 2023-02-07 09:57:11,287 - Thread-131 - Trying to get file /home/pi/ftp/files/DuetLapse/octopi/192-168-1-8/598_1_printer_square_calibration/Camera1_00000005.jpeg 2023-02-07 09:57:11,288 - Thread-131 - image/jpeg 2023-02-07 09:57:11,593 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:57:11,594 - gcodeLoop - Getting Status 2023-02-07 09:57:11,594 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:57:15,280 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 09:57:15,281 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 09:57:15,308 - captureLoop - elapsed: 10.060727834701538 2023-02-07 09:57:15,309 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 09:57:15,310 - captureLoop - Getting Status 2023-02-07 09:57:15,311 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:57:16,279 - Thread-132 - !!!!! http call: {'displayStatus': ['true']} !!!!! 2023-02-07 09:57:16,621 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:57:16,623 - gcodeLoop - Getting Status 2023-02-07 09:57:16,625 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:57:21,346 - Thread-133 - !!!!! http call: {'displayStatus': ['true']} !!!!! 2023-02-07 09:57:21,666 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:57:21,666 - gcodeLoop - Getting Status 2023-02-07 09:57:21,667 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:57:25,364 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 09:57:25,365 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 09:57:25,400 - captureLoop - elapsed: 20.152417421340942 2023-02-07 09:57:25,401 - captureLoop - Time - Camera1: capturing frame 6 at layer 1 after 20 seconds 2023-02-07 09:57:26,400 - Thread-134 - !!!!! http call: {'displayStatus': ['true']} !!!!! 2023-02-07 09:57:26,693 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:57:26,694 - gcodeLoop - Getting Status 2023-02-07 09:57:26,696 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:57:27,071 - captureLoop - Command Success : ffmpeg -threads 1 -loglevel quiet -y -i http://cam.local:8081 -vframes 1 -threads 1 /home/pi/ftp/files/DuetLapse/octopi/192-168-1-8/598_1_printer_square_calibration/Camera1_00000006.jpeg 2023-02-07 09:57:27,071 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 09:57:27,072 - captureLoop - Getting Status 2023-02-07 09:57:27,072 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:57:31,448 - Thread-135 - !!!!! http call: {'displayStatus': ['true']} !!!!! 2023-02-07 09:57:31,478 - Thread-136 - !!!!! http call: {'getfile': ['/home/pi/ftp/files/DuetLapse/octopi/192-168-1-8/598_1_printer_square_calibration/Camera1_00000006.jpeg']} !!!!! 2023-02-07 09:57:31,479 - Thread-136 - Trying to get file /home/pi/ftp/files/DuetLapse/octopi/192-168-1-8/598_1_printer_square_calibration/Camera1_00000006.jpeg 2023-02-07 09:57:31,480 - Thread-136 - image/jpeg 2023-02-07 09:57:31,726 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:57:31,735 - gcodeLoop - Getting Status 2023-02-07 09:57:31,736 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:57:36,513 - Thread-137 - !!!!! http call: {'displayStatus': ['true']} !!!!! 2023-02-07 09:57:36,790 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:57:36,791 - gcodeLoop - Getting Status 2023-02-07 09:57:36,793 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:57:37,102 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 09:57:37,103 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 09:57:37,123 - captureLoop - elapsed: 10.051785707473755 2023-02-07 09:57:37,124 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 09:57:37,124 - captureLoop - Getting Status 2023-02-07 09:57:37,125 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:57:41,830 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:57:41,830 - gcodeLoop - Getting Status 2023-02-07 09:57:41,833 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:57:41,962 - Thread-138 - !!!!! http call: {'displayStatus': ['true']} !!!!! 2023-02-07 09:57:46,911 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:57:46,912 - gcodeLoop - Getting Status 2023-02-07 09:57:46,916 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:57:47,014 - Thread-139 - !!!!! http call: {'displayStatus': ['true']} !!!!! 2023-02-07 09:57:47,156 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 09:57:47,157 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 09:57:47,194 - captureLoop - elapsed: 20.122703075408936 2023-02-07 09:57:47,195 - captureLoop - Calling function Status from Check for Pause with rr_model 2023-02-07 09:57:47,195 - captureLoop - Getting Status 2023-02-07 09:57:47,195 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:57:47,218 - captureLoop - Time - Camera1: capturing frame 7 at layer 2 after 20 seconds 2023-02-07 09:57:48,871 - captureLoop - Command Success : ffmpeg -threads 1 -loglevel quiet -y -i http://cam.local:8081 -vframes 1 -threads 1 /home/pi/ftp/files/DuetLapse/octopi/192-168-1-8/598_1_printer_square_calibration/Camera1_00000007.jpeg 2023-02-07 09:57:48,871 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 09:57:48,872 - captureLoop - Getting Status 2023-02-07 09:57:48,872 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:57:51,942 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:57:51,943 - gcodeLoop - Getting Status 2023-02-07 09:57:51,943 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:57:52,057 - Thread-140 - !!!!! http call: {'displayStatus': ['true']} !!!!! 2023-02-07 09:57:52,087 - Thread-141 - !!!!! http call: {'getfile': ['/home/pi/ftp/files/DuetLapse/octopi/192-168-1-8/598_1_printer_square_calibration/Camera1_00000007.jpeg']} !!!!! 2023-02-07 09:57:52,088 - Thread-141 - Trying to get file /home/pi/ftp/files/DuetLapse/octopi/192-168-1-8/598_1_printer_square_calibration/Camera1_00000007.jpeg 2023-02-07 09:57:52,088 - Thread-141 - image/jpeg 2023-02-07 09:57:56,977 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:57:56,978 - gcodeLoop - Getting Status 2023-02-07 09:57:56,978 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:57:57,112 - Thread-142 - !!!!! http call: {'displayStatus': ['true']} !!!!! 2023-02-07 09:57:58,907 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 09:57:58,908 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 09:57:58,936 - captureLoop - elapsed: 10.064462423324585 2023-02-07 09:57:58,937 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 09:57:58,938 - captureLoop - Getting Status 2023-02-07 09:57:58,938 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:58:02,025 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:58:02,025 - gcodeLoop - Getting Status 2023-02-07 09:58:02,026 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:58:02,170 - Thread-143 - !!!!! http call: {'displayStatus': ['true']} !!!!! 2023-02-07 09:58:07,070 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:58:07,071 - gcodeLoop - Getting Status 2023-02-07 09:58:07,073 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:58:07,230 - Thread-144 - !!!!! http call: {'displayStatus': ['true']} !!!!! 2023-02-07 09:58:08,976 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 09:58:08,977 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 09:58:09,022 - captureLoop - elapsed: 20.15088200569153 2023-02-07 09:58:09,023 - captureLoop - Calling function Status from Check for Pause with rr_model 2023-02-07 09:58:09,023 - captureLoop - Getting Status 2023-02-07 09:58:09,023 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:58:09,047 - captureLoop - Time - Camera1: capturing frame 8 at layer 2 after 20 seconds 2023-02-07 09:58:10,721 - captureLoop - Command Success : ffmpeg -threads 1 -loglevel quiet -y -i http://cam.local:8081 -vframes 1 -threads 1 /home/pi/ftp/files/DuetLapse/octopi/192-168-1-8/598_1_printer_square_calibration/Camera1_00000008.jpeg 2023-02-07 09:58:10,722 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 09:58:10,722 - captureLoop - Getting Status 2023-02-07 09:58:10,723 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:58:12,114 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:58:12,114 - gcodeLoop - Getting Status 2023-02-07 09:58:12,118 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:58:12,405 - Thread-145 - !!!!! http call: {'displayStatus': ['true']} !!!!! 2023-02-07 09:58:12,430 - Thread-146 - !!!!! http call: {'getfile': ['/home/pi/ftp/files/DuetLapse/octopi/192-168-1-8/598_1_printer_square_calibration/Camera1_00000008.jpeg']} !!!!! 2023-02-07 09:58:12,431 - Thread-146 - Trying to get file /home/pi/ftp/files/DuetLapse/octopi/192-168-1-8/598_1_printer_square_calibration/Camera1_00000008.jpeg 2023-02-07 09:58:12,432 - Thread-146 - image/jpeg 2023-02-07 09:58:17,185 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:58:17,186 - gcodeLoop - Getting Status 2023-02-07 09:58:17,191 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:58:17,464 - Thread-147 - !!!!! http call: {'displayStatus': ['true']} !!!!! 2023-02-07 09:58:20,766 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 09:58:20,767 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 09:58:20,791 - captureLoop - elapsed: 10.068880558013916 2023-02-07 09:58:20,791 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 09:58:20,792 - captureLoop - Getting Status 2023-02-07 09:58:20,792 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:58:22,257 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:58:22,258 - gcodeLoop - Getting Status 2023-02-07 09:58:22,261 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:58:22,560 - Thread-148 - !!!!! http call: {'displayStatus': ['true']} !!!!! 2023-02-07 09:58:27,303 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:58:27,304 - gcodeLoop - Getting Status 2023-02-07 09:58:27,304 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:58:27,622 - Thread-149 - !!!!! http call: {'displayStatus': ['true']} !!!!! 2023-02-07 09:58:30,828 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 09:58:30,828 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 09:58:30,860 - captureLoop - elapsed: 20.138274669647217 2023-02-07 09:58:30,861 - captureLoop - Calling function Status from Check for Pause with rr_model 2023-02-07 09:58:30,862 - captureLoop - Getting Status 2023-02-07 09:58:30,863 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:58:30,891 - captureLoop - Time - Camera1: capturing frame 9 at layer 3 after 20 seconds 2023-02-07 09:58:32,405 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:58:32,405 - gcodeLoop - Getting Status 2023-02-07 09:58:32,406 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:58:32,585 - captureLoop - Command Success : ffmpeg -threads 1 -loglevel quiet -y -i http://cam.local:8081 -vframes 1 -threads 1 /home/pi/ftp/files/DuetLapse/octopi/192-168-1-8/598_1_printer_square_calibration/Camera1_00000009.jpeg 2023-02-07 09:58:32,585 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 09:58:32,586 - captureLoop - Getting Status 2023-02-07 09:58:32,586 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:58:32,705 - Thread-150 - !!!!! http call: {'displayStatus': ['true']} !!!!! 2023-02-07 09:58:32,728 - Thread-151 - !!!!! http call: {'getfile': ['/home/pi/ftp/files/DuetLapse/octopi/192-168-1-8/598_1_printer_square_calibration/Camera1_00000009.jpeg']} !!!!! 2023-02-07 09:58:32,728 - Thread-151 - Trying to get file /home/pi/ftp/files/DuetLapse/octopi/192-168-1-8/598_1_printer_square_calibration/Camera1_00000009.jpeg 2023-02-07 09:58:32,729 - Thread-151 - image/jpeg 2023-02-07 09:58:37,476 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:58:37,477 - gcodeLoop - Getting Status 2023-02-07 09:58:37,478 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:58:37,759 - Thread-152 - !!!!! http call: {'displayStatus': ['true']} !!!!! 2023-02-07 09:58:42,525 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:58:42,526 - gcodeLoop - Getting Status 2023-02-07 09:58:42,529 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:58:42,648 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 09:58:42,649 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 09:58:42,678 - captureLoop - elapsed: 10.092389583587646 2023-02-07 09:58:42,679 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 09:58:42,679 - captureLoop - Getting Status 2023-02-07 09:58:42,680 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:58:42,827 - Thread-153 - !!!!! http call: {'displayStatus': ['true']} !!!!! 2023-02-07 09:58:47,569 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:58:47,570 - gcodeLoop - Getting Status 2023-02-07 09:58:47,573 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:58:47,973 - Thread-154 - !!!!! http call: {'displayStatus': ['true']} !!!!! 2023-02-07 09:58:52,613 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:58:52,613 - gcodeLoop - Getting Status 2023-02-07 09:58:52,614 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:58:52,717 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 09:58:52,718 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 09:58:52,738 - captureLoop - elapsed: 20.152288675308228 2023-02-07 09:58:52,738 - captureLoop - Calling function Status from Check for Pause with rr_model 2023-02-07 09:58:52,738 - captureLoop - Getting Status 2023-02-07 09:58:52,739 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:58:52,770 - captureLoop - Time - Camera1: capturing frame 10 at layer 3 after 20 seconds 2023-02-07 09:58:53,030 - Thread-155 - !!!!! http call: {'displayStatus': ['true']} !!!!! 2023-02-07 09:58:54,445 - captureLoop - Command Success : ffmpeg -threads 1 -loglevel quiet -y -i http://cam.local:8081 -vframes 1 -threads 1 /home/pi/ftp/files/DuetLapse/octopi/192-168-1-8/598_1_printer_square_calibration/Camera1_00000010.jpeg 2023-02-07 09:58:54,445 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 09:58:54,446 - captureLoop - Getting Status 2023-02-07 09:58:54,447 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:58:57,646 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:58:57,647 - gcodeLoop - Getting Status 2023-02-07 09:58:57,647 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:58:58,080 - Thread-156 - !!!!! http call: {'displayStatus': ['true']} !!!!! 2023-02-07 09:58:58,099 - Thread-157 - !!!!! http call: {'getfile': ['/home/pi/ftp/files/DuetLapse/octopi/192-168-1-8/598_1_printer_square_calibration/Camera1_00000010.jpeg']} !!!!! 2023-02-07 09:58:58,100 - Thread-157 - Trying to get file /home/pi/ftp/files/DuetLapse/octopi/192-168-1-8/598_1_printer_square_calibration/Camera1_00000010.jpeg 2023-02-07 09:58:58,101 - Thread-157 - image/jpeg 2023-02-07 09:59:02,676 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:59:02,677 - gcodeLoop - Getting Status 2023-02-07 09:59:02,679 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:59:03,160 - Thread-158 - !!!!! http call: {'displayStatus': ['true']} !!!!! 2023-02-07 09:59:04,485 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 09:59:04,486 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 09:59:04,520 - captureLoop - elapsed: 10.074198961257935 2023-02-07 09:59:04,521 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 09:59:04,521 - captureLoop - Getting Status 2023-02-07 09:59:04,522 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:59:07,726 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:59:07,726 - gcodeLoop - Getting Status 2023-02-07 09:59:07,729 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:59:12,786 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:59:12,786 - gcodeLoop - Getting Status 2023-02-07 09:59:12,787 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:59:14,569 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 09:59:14,570 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 09:59:14,668 - captureLoop - elapsed: 20.222267627716064 2023-02-07 09:59:14,669 - captureLoop - Calling function Status from Check for Pause with rr_model 2023-02-07 09:59:14,669 - captureLoop - Getting Status 2023-02-07 09:59:14,670 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:59:14,719 - captureLoop - Time - Camera1: capturing frame 11 at layer 3 after 20 seconds 2023-02-07 09:59:16,482 - captureLoop - Command Success : ffmpeg -threads 1 -loglevel quiet -y -i http://cam.local:8081 -vframes 1 -threads 1 /home/pi/ftp/files/DuetLapse/octopi/192-168-1-8/598_1_printer_square_calibration/Camera1_00000011.jpeg 2023-02-07 09:59:16,483 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 09:59:16,484 - captureLoop - Getting Status 2023-02-07 09:59:16,484 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:59:17,832 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:59:17,833 - gcodeLoop - Getting Status 2023-02-07 09:59:17,833 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:59:22,886 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:59:22,887 - gcodeLoop - Getting Status 2023-02-07 09:59:22,891 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:59:26,527 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 09:59:26,528 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 09:59:26,552 - captureLoop - elapsed: 10.068933963775635 2023-02-07 09:59:26,553 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 09:59:26,553 - captureLoop - Getting Status 2023-02-07 09:59:26,554 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:59:27,950 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:59:27,951 - gcodeLoop - Getting Status 2023-02-07 09:59:27,954 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:59:33,012 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:59:33,013 - gcodeLoop - Getting Status 2023-02-07 09:59:33,016 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:59:36,586 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 09:59:36,587 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 09:59:36,619 - captureLoop - elapsed: 20.13584065437317 2023-02-07 09:59:36,620 - captureLoop - Calling function Status from Check for Pause with rr_model 2023-02-07 09:59:36,620 - captureLoop - Getting Status 2023-02-07 09:59:36,621 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:59:36,653 - captureLoop - Time - Camera1: capturing frame 12 at layer 4 after 20 seconds 2023-02-07 09:59:38,056 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:59:38,057 - gcodeLoop - Getting Status 2023-02-07 09:59:38,059 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:59:38,350 - captureLoop - Command Success : ffmpeg -threads 1 -loglevel quiet -y -i http://cam.local:8081 -vframes 1 -threads 1 /home/pi/ftp/files/DuetLapse/octopi/192-168-1-8/598_1_printer_square_calibration/Camera1_00000012.jpeg 2023-02-07 09:59:38,351 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 09:59:38,351 - captureLoop - Getting Status 2023-02-07 09:59:38,351 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:59:43,092 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:59:43,093 - gcodeLoop - Getting Status 2023-02-07 09:59:43,094 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:59:48,131 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:59:48,132 - gcodeLoop - Getting Status 2023-02-07 09:59:48,135 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:59:48,385 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 09:59:48,386 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 09:59:48,413 - captureLoop - elapsed: 10.06257438659668 2023-02-07 09:59:48,414 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 09:59:48,415 - captureLoop - Getting Status 2023-02-07 09:59:48,416 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:59:53,191 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:59:53,192 - gcodeLoop - Getting Status 2023-02-07 09:59:53,194 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:59:58,226 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 09:59:58,226 - gcodeLoop - Getting Status 2023-02-07 09:59:58,227 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:59:58,459 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 09:59:58,459 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 09:59:58,486 - captureLoop - elapsed: 20.134812593460083 2023-02-07 09:59:58,486 - captureLoop - Calling function Status from Check for Pause with rr_model 2023-02-07 09:59:58,487 - captureLoop - Getting Status 2023-02-07 09:59:58,487 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 09:59:58,511 - captureLoop - Time - Camera1: capturing frame 13 at layer 4 after 20 seconds 2023-02-07 10:00:00,169 - captureLoop - Command Success : ffmpeg -threads 1 -loglevel quiet -y -i http://cam.local:8081 -vframes 1 -threads 1 /home/pi/ftp/files/DuetLapse/octopi/192-168-1-8/598_1_printer_square_calibration/Camera1_00000013.jpeg 2023-02-07 10:00:00,170 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 10:00:00,171 - captureLoop - Getting Status 2023-02-07 10:00:00,171 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:00:03,258 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:00:03,259 - gcodeLoop - Getting Status 2023-02-07 10:00:03,260 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:00:08,319 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:00:08,320 - gcodeLoop - Getting Status 2023-02-07 10:00:08,320 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:00:10,196 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 10:00:10,196 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 10:00:10,219 - captureLoop - elapsed: 10.048433542251587 2023-02-07 10:00:10,219 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 10:00:10,219 - captureLoop - Getting Status 2023-02-07 10:00:10,220 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:00:13,364 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:00:13,365 - gcodeLoop - Getting Status 2023-02-07 10:00:13,366 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:00:18,403 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:00:18,404 - gcodeLoop - Getting Status 2023-02-07 10:00:18,405 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:00:20,258 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 10:00:20,258 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 10:00:20,281 - captureLoop - elapsed: 20.11125111579895 2023-02-07 10:00:20,282 - captureLoop - Calling function Status from Check for Pause with rr_model 2023-02-07 10:00:20,282 - captureLoop - Getting Status 2023-02-07 10:00:20,283 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:00:20,307 - captureLoop - Time - Camera1: capturing frame 14 at layer 5 after 20 seconds 2023-02-07 10:00:22,031 - captureLoop - Command Success : ffmpeg -threads 1 -loglevel quiet -y -i http://cam.local:8081 -vframes 1 -threads 1 /home/pi/ftp/files/DuetLapse/octopi/192-168-1-8/598_1_printer_square_calibration/Camera1_00000014.jpeg 2023-02-07 10:00:22,036 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 10:00:22,037 - captureLoop - Getting Status 2023-02-07 10:00:22,037 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:00:23,477 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:00:23,478 - gcodeLoop - Getting Status 2023-02-07 10:00:23,479 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:00:28,517 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:00:28,518 - gcodeLoop - Getting Status 2023-02-07 10:00:28,518 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:00:32,075 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 10:00:32,075 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 10:00:32,111 - captureLoop - elapsed: 10.074588060379028 2023-02-07 10:00:32,112 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 10:00:32,112 - captureLoop - Getting Status 2023-02-07 10:00:32,112 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:00:33,565 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:00:33,565 - gcodeLoop - Getting Status 2023-02-07 10:00:33,568 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:00:38,604 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:00:38,605 - gcodeLoop - Getting Status 2023-02-07 10:00:38,605 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:00:42,148 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 10:00:42,149 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 10:00:42,179 - captureLoop - elapsed: 20.142342567443848 2023-02-07 10:00:42,180 - captureLoop - Calling function Status from Check for Pause with rr_model 2023-02-07 10:00:42,181 - captureLoop - Getting Status 2023-02-07 10:00:42,181 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:00:42,212 - captureLoop - Time - Camera1: capturing frame 15 at layer 5 after 20 seconds 2023-02-07 10:00:43,645 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:00:43,647 - gcodeLoop - Getting Status 2023-02-07 10:00:43,648 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:00:43,842 - captureLoop - Command Success : ffmpeg -threads 1 -loglevel quiet -y -i http://cam.local:8081 -vframes 1 -threads 1 /home/pi/ftp/files/DuetLapse/octopi/192-168-1-8/598_1_printer_square_calibration/Camera1_00000015.jpeg 2023-02-07 10:00:43,842 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 10:00:43,843 - captureLoop - Getting Status 2023-02-07 10:00:43,843 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:00:48,694 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:00:48,695 - gcodeLoop - Getting Status 2023-02-07 10:00:48,696 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:00:53,739 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:00:53,740 - gcodeLoop - Getting Status 2023-02-07 10:00:53,740 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:00:53,867 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 10:00:53,868 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 10:00:53,889 - captureLoop - elapsed: 10.047093391418457 2023-02-07 10:00:53,890 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 10:00:53,890 - captureLoop - Getting Status 2023-02-07 10:00:53,890 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:00:58,767 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:00:58,768 - gcodeLoop - Getting Status 2023-02-07 10:00:58,769 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:01:03,814 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:01:03,814 - gcodeLoop - Getting Status 2023-02-07 10:01:03,815 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:01:03,930 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 10:01:03,930 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 10:01:03,967 - captureLoop - elapsed: 20.12529993057251 2023-02-07 10:01:03,969 - captureLoop - Calling function Status from Check for Pause with rr_model 2023-02-07 10:01:03,969 - captureLoop - Getting Status 2023-02-07 10:01:03,969 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:01:04,019 - captureLoop - Time - Camera1: capturing frame 16 at layer 5 after 20 seconds 2023-02-07 10:01:05,707 - captureLoop - Command Success : ffmpeg -threads 1 -loglevel quiet -y -i http://cam.local:8081 -vframes 1 -threads 1 /home/pi/ftp/files/DuetLapse/octopi/192-168-1-8/598_1_printer_square_calibration/Camera1_00000016.jpeg 2023-02-07 10:01:05,708 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 10:01:05,709 - captureLoop - Getting Status 2023-02-07 10:01:05,709 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:01:08,872 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:01:08,874 - gcodeLoop - Getting Status 2023-02-07 10:01:08,874 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:01:13,917 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:01:13,917 - gcodeLoop - Getting Status 2023-02-07 10:01:13,918 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:01:15,753 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 10:01:15,753 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 10:01:15,784 - captureLoop - elapsed: 10.075820922851562 2023-02-07 10:01:15,785 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 10:01:15,785 - captureLoop - Getting Status 2023-02-07 10:01:15,785 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:01:18,953 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:01:18,954 - gcodeLoop - Getting Status 2023-02-07 10:01:18,954 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:01:24,003 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:01:24,004 - gcodeLoop - Getting Status 2023-02-07 10:01:24,004 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:01:25,827 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 10:01:25,828 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 10:01:25,946 - captureLoop - elapsed: 20.238165616989136 2023-02-07 10:01:25,947 - captureLoop - Calling function Status from Check for Pause with rr_model 2023-02-07 10:01:25,948 - captureLoop - Getting Status 2023-02-07 10:01:25,949 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:01:25,979 - captureLoop - Time - Camera1: capturing frame 17 at layer 6 after 20 seconds 2023-02-07 10:01:27,726 - captureLoop - Command Success : ffmpeg -threads 1 -loglevel quiet -y -i http://cam.local:8081 -vframes 1 -threads 1 /home/pi/ftp/files/DuetLapse/octopi/192-168-1-8/598_1_printer_square_calibration/Camera1_00000017.jpeg 2023-02-07 10:01:27,727 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 10:01:27,728 - captureLoop - Getting Status 2023-02-07 10:01:27,728 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:01:29,035 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:01:29,037 - gcodeLoop - Getting Status 2023-02-07 10:01:29,037 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:01:34,083 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:01:34,084 - gcodeLoop - Getting Status 2023-02-07 10:01:34,084 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:01:37,805 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 10:01:37,805 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 10:01:37,827 - captureLoop - elapsed: 10.099972486495972 2023-02-07 10:01:37,828 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 10:01:37,828 - captureLoop - Getting Status 2023-02-07 10:01:37,828 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:01:39,116 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:01:39,117 - gcodeLoop - Getting Status 2023-02-07 10:01:39,120 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:01:44,167 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:01:44,168 - gcodeLoop - Getting Status 2023-02-07 10:01:44,168 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:01:47,856 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 10:01:47,857 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 10:01:47,884 - captureLoop - elapsed: 20.157306909561157 2023-02-07 10:01:47,885 - captureLoop - Calling function Status from Check for Pause with rr_model 2023-02-07 10:01:47,886 - captureLoop - Getting Status 2023-02-07 10:01:47,886 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:01:47,909 - captureLoop - Time - Camera1: capturing frame 18 at layer 6 after 20 seconds 2023-02-07 10:01:49,198 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:01:49,200 - gcodeLoop - Getting Status 2023-02-07 10:01:49,200 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:01:49,579 - captureLoop - Command Success : ffmpeg -threads 1 -loglevel quiet -y -i http://cam.local:8081 -vframes 1 -threads 1 /home/pi/ftp/files/DuetLapse/octopi/192-168-1-8/598_1_printer_square_calibration/Camera1_00000018.jpeg 2023-02-07 10:01:49,579 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 10:01:49,580 - captureLoop - Getting Status 2023-02-07 10:01:49,580 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:01:54,250 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:01:54,251 - gcodeLoop - Getting Status 2023-02-07 10:01:54,251 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:01:59,314 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:01:59,315 - gcodeLoop - Getting Status 2023-02-07 10:01:59,315 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:01:59,616 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 10:01:59,617 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 10:01:59,731 - captureLoop - elapsed: 10.151684045791626 2023-02-07 10:01:59,732 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 10:01:59,732 - captureLoop - Getting Status 2023-02-07 10:01:59,733 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:02:04,462 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:02:04,464 - gcodeLoop - Getting Status 2023-02-07 10:02:04,465 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:02:09,510 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:02:09,511 - gcodeLoop - Getting Status 2023-02-07 10:02:09,514 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:02:09,773 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 10:02:09,774 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 10:02:09,873 - captureLoop - elapsed: 20.294034957885742 2023-02-07 10:02:09,874 - captureLoop - Calling function Status from Check for Pause with rr_model 2023-02-07 10:02:09,875 - captureLoop - Getting Status 2023-02-07 10:02:09,875 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:02:09,905 - captureLoop - Time - Camera1: capturing frame 19 at layer 7 after 20 seconds 2023-02-07 10:02:11,593 - captureLoop - Command Success : ffmpeg -threads 1 -loglevel quiet -y -i http://cam.local:8081 -vframes 1 -threads 1 /home/pi/ftp/files/DuetLapse/octopi/192-168-1-8/598_1_printer_square_calibration/Camera1_00000019.jpeg 2023-02-07 10:02:11,593 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 10:02:11,594 - captureLoop - Getting Status 2023-02-07 10:02:11,594 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:02:14,574 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:02:14,575 - gcodeLoop - Getting Status 2023-02-07 10:02:14,579 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:02:19,696 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:02:19,697 - gcodeLoop - Getting Status 2023-02-07 10:02:19,697 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:02:21,626 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 10:02:21,627 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 10:02:21,652 - captureLoop - elapsed: 10.058970212936401 2023-02-07 10:02:21,653 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 10:02:21,654 - captureLoop - Getting Status 2023-02-07 10:02:21,654 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:02:24,729 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:02:24,731 - gcodeLoop - Getting Status 2023-02-07 10:02:24,731 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:02:29,770 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:02:29,771 - gcodeLoop - Getting Status 2023-02-07 10:02:29,774 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:02:31,686 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 10:02:31,686 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 10:02:31,705 - captureLoop - elapsed: 20.111714363098145 2023-02-07 10:02:31,706 - captureLoop - Calling function Status from Check for Pause with rr_model 2023-02-07 10:02:31,706 - captureLoop - Getting Status 2023-02-07 10:02:31,707 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:02:31,728 - captureLoop - Time - Camera1: capturing frame 20 at layer 7 after 20 seconds 2023-02-07 10:02:33,551 - captureLoop - Command Success : ffmpeg -threads 1 -loglevel quiet -y -i http://cam.local:8081 -vframes 1 -threads 1 /home/pi/ftp/files/DuetLapse/octopi/192-168-1-8/598_1_printer_square_calibration/Camera1_00000020.jpeg 2023-02-07 10:02:33,561 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 10:02:33,562 - captureLoop - Getting Status 2023-02-07 10:02:33,562 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:02:34,847 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:02:34,848 - gcodeLoop - Getting Status 2023-02-07 10:02:34,854 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:02:39,916 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:02:39,917 - gcodeLoop - Getting Status 2023-02-07 10:02:39,917 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:02:43,606 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 10:02:43,607 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 10:02:43,662 - captureLoop - elapsed: 10.100767135620117 2023-02-07 10:02:43,663 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 10:02:43,663 - captureLoop - Getting Status 2023-02-07 10:02:43,664 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:02:44,954 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:02:44,954 - gcodeLoop - Getting Status 2023-02-07 10:02:44,955 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:02:50,006 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:02:50,007 - gcodeLoop - Getting Status 2023-02-07 10:02:50,010 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:02:53,706 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 10:02:53,707 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 10:02:53,734 - captureLoop - elapsed: 20.17265248298645 2023-02-07 10:02:53,734 - captureLoop - Calling function Status from Check for Pause with rr_model 2023-02-07 10:02:53,735 - captureLoop - Getting Status 2023-02-07 10:02:53,735 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:02:53,758 - captureLoop - Time - Camera1: capturing frame 21 at layer 7 after 20 seconds 2023-02-07 10:02:55,124 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:02:55,126 - gcodeLoop - Getting Status 2023-02-07 10:02:55,129 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:02:55,441 - captureLoop - Command Success : ffmpeg -threads 1 -loglevel quiet -y -i http://cam.local:8081 -vframes 1 -threads 1 /home/pi/ftp/files/DuetLapse/octopi/192-168-1-8/598_1_printer_square_calibration/Camera1_00000021.jpeg 2023-02-07 10:02:55,442 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 10:02:55,442 - captureLoop - Getting Status 2023-02-07 10:02:55,442 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:03:00,173 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:03:00,174 - gcodeLoop - Getting Status 2023-02-07 10:03:00,178 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:03:05,207 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:03:05,208 - gcodeLoop - Getting Status 2023-02-07 10:03:05,212 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:03:05,480 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 10:03:05,481 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 10:03:05,517 - captureLoop - elapsed: 10.074934482574463 2023-02-07 10:03:05,518 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 10:03:05,518 - captureLoop - Getting Status 2023-02-07 10:03:05,519 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:03:10,254 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:03:10,259 - gcodeLoop - Getting Status 2023-02-07 10:03:10,260 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:03:15,307 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:03:15,308 - gcodeLoop - Getting Status 2023-02-07 10:03:15,313 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:03:15,594 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 10:03:15,595 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 10:03:15,717 - captureLoop - elapsed: 20.275278091430664 2023-02-07 10:03:15,722 - captureLoop - Calling function Status from Check for Pause with rr_model 2023-02-07 10:03:15,723 - captureLoop - Getting Status 2023-02-07 10:03:15,723 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:03:15,750 - captureLoop - Time - Camera1: capturing frame 22 at layer 8 after 20 seconds 2023-02-07 10:03:17,442 - captureLoop - Command Success : ffmpeg -threads 1 -loglevel quiet -y -i http://cam.local:8081 -vframes 1 -threads 1 /home/pi/ftp/files/DuetLapse/octopi/192-168-1-8/598_1_printer_square_calibration/Camera1_00000022.jpeg 2023-02-07 10:03:17,443 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 10:03:17,443 - captureLoop - Getting Status 2023-02-07 10:03:17,443 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:03:20,346 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:03:20,346 - gcodeLoop - Getting Status 2023-02-07 10:03:20,347 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:03:25,375 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:03:25,375 - gcodeLoop - Getting Status 2023-02-07 10:03:25,376 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:03:27,592 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 10:03:27,593 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 10:03:27,624 - captureLoop - elapsed: 10.181111097335815 2023-02-07 10:03:27,625 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 10:03:27,625 - captureLoop - Getting Status 2023-02-07 10:03:27,626 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:03:30,408 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:03:30,409 - gcodeLoop - Getting Status 2023-02-07 10:03:30,410 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:03:35,476 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:03:35,477 - gcodeLoop - Getting Status 2023-02-07 10:03:35,481 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:03:37,670 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 10:03:37,671 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 10:03:37,689 - captureLoop - elapsed: 20.24672031402588 2023-02-07 10:03:37,690 - captureLoop - Calling function Status from Check for Pause with rr_model 2023-02-07 10:03:37,691 - captureLoop - Getting Status 2023-02-07 10:03:37,691 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:03:37,716 - captureLoop - Time - Camera1: capturing frame 23 at layer 8 after 20 seconds 2023-02-07 10:03:39,394 - captureLoop - Command Success : ffmpeg -threads 1 -loglevel quiet -y -i http://cam.local:8081 -vframes 1 -threads 1 /home/pi/ftp/files/DuetLapse/octopi/192-168-1-8/598_1_printer_square_calibration/Camera1_00000023.jpeg 2023-02-07 10:03:39,395 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 10:03:39,395 - captureLoop - Getting Status 2023-02-07 10:03:39,396 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:03:40,521 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:03:40,522 - gcodeLoop - Getting Status 2023-02-07 10:03:40,523 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:03:45,567 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:03:45,568 - gcodeLoop - Getting Status 2023-02-07 10:03:45,569 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:03:49,456 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 10:03:49,458 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 10:03:49,508 - captureLoop - elapsed: 10.11310887336731 2023-02-07 10:03:49,509 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 10:03:49,510 - captureLoop - Getting Status 2023-02-07 10:03:49,510 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:03:50,610 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:03:50,611 - gcodeLoop - Getting Status 2023-02-07 10:03:50,611 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:03:55,747 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:03:55,747 - gcodeLoop - Getting Status 2023-02-07 10:03:55,748 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:03:59,546 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 10:03:59,547 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 10:03:59,583 - captureLoop - elapsed: 20.18709659576416 2023-02-07 10:03:59,584 - captureLoop - Calling function Status from Check for Pause with rr_model 2023-02-07 10:03:59,585 - captureLoop - Getting Status 2023-02-07 10:03:59,588 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:03:59,621 - captureLoop - Time - Camera1: capturing frame 24 at layer 9 after 20 seconds 2023-02-07 10:04:00,869 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:04:00,870 - gcodeLoop - Getting Status 2023-02-07 10:04:00,870 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:04:01,427 - captureLoop - Command Success : ffmpeg -threads 1 -loglevel quiet -y -i http://cam.local:8081 -vframes 1 -threads 1 /home/pi/ftp/files/DuetLapse/octopi/192-168-1-8/598_1_printer_square_calibration/Camera1_00000024.jpeg 2023-02-07 10:04:01,428 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 10:04:01,429 - captureLoop - Getting Status 2023-02-07 10:04:01,429 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:04:05,936 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:04:05,936 - gcodeLoop - Getting Status 2023-02-07 10:04:05,937 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:04:10,969 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:04:10,970 - gcodeLoop - Getting Status 2023-02-07 10:04:10,972 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:04:11,459 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 10:04:11,460 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 10:04:11,527 - captureLoop - elapsed: 10.098272323608398 2023-02-07 10:04:11,527 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 10:04:11,528 - captureLoop - Getting Status 2023-02-07 10:04:11,528 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:04:16,127 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:04:16,127 - gcodeLoop - Getting Status 2023-02-07 10:04:16,128 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:04:21,249 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:04:21,250 - gcodeLoop - Getting Status 2023-02-07 10:04:21,251 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:04:21,556 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 10:04:21,557 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 10:04:21,663 - captureLoop - elapsed: 20.234705448150635 2023-02-07 10:04:21,664 - captureLoop - Calling function Status from Check for Pause with rr_model 2023-02-07 10:04:21,664 - captureLoop - Getting Status 2023-02-07 10:04:21,665 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:04:21,691 - captureLoop - Time - Camera1: capturing frame 25 at layer 9 after 20 seconds 2023-02-07 10:04:23,396 - captureLoop - Command Success : ffmpeg -threads 1 -loglevel quiet -y -i http://cam.local:8081 -vframes 1 -threads 1 /home/pi/ftp/files/DuetLapse/octopi/192-168-1-8/598_1_printer_square_calibration/Camera1_00000025.jpeg 2023-02-07 10:04:23,397 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 10:04:23,397 - captureLoop - Getting Status 2023-02-07 10:04:23,397 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:04:26,367 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:04:26,368 - gcodeLoop - Getting Status 2023-02-07 10:04:26,368 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:04:31,397 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:04:31,398 - gcodeLoop - Getting Status 2023-02-07 10:04:31,403 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:04:33,513 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 10:04:33,514 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 10:04:33,646 - captureLoop - elapsed: 10.249006986618042 2023-02-07 10:04:33,647 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 10:04:33,647 - captureLoop - Getting Status 2023-02-07 10:04:33,648 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:04:36,502 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:04:36,503 - gcodeLoop - Getting Status 2023-02-07 10:04:36,506 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:04:41,550 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:04:41,551 - gcodeLoop - Getting Status 2023-02-07 10:04:41,552 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:04:43,686 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 10:04:43,686 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 10:04:43,777 - captureLoop - elapsed: 20.380675315856934 2023-02-07 10:04:43,778 - captureLoop - Calling function Status from Check for Pause with rr_model 2023-02-07 10:04:43,778 - captureLoop - Getting Status 2023-02-07 10:04:43,779 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:04:43,800 - captureLoop - Time - Camera1: capturing frame 26 at layer 9 after 20 seconds 2023-02-07 10:04:45,455 - captureLoop - Command Success : ffmpeg -threads 1 -loglevel quiet -y -i http://cam.local:8081 -vframes 1 -threads 1 /home/pi/ftp/files/DuetLapse/octopi/192-168-1-8/598_1_printer_square_calibration/Camera1_00000026.jpeg 2023-02-07 10:04:45,456 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 10:04:45,456 - captureLoop - Getting Status 2023-02-07 10:04:45,457 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:04:46,656 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:04:46,657 - gcodeLoop - Getting Status 2023-02-07 10:04:46,664 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:04:51,696 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:04:51,696 - gcodeLoop - Getting Status 2023-02-07 10:04:51,699 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:04:55,572 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 10:04:55,573 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 10:04:55,659 - captureLoop - elapsed: 10.202921867370605 2023-02-07 10:04:55,660 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 10:04:55,660 - captureLoop - Getting Status 2023-02-07 10:04:55,661 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:04:56,730 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:04:56,731 - gcodeLoop - Getting Status 2023-02-07 10:04:56,731 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:05:01,797 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:05:01,798 - gcodeLoop - Getting Status 2023-02-07 10:05:01,798 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:05:05,704 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 10:05:05,704 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 10:05:05,733 - captureLoop - elapsed: 20.277214765548706 2023-02-07 10:05:05,734 - captureLoop - Calling function Status from Check for Pause with rr_model 2023-02-07 10:05:05,734 - captureLoop - Getting Status 2023-02-07 10:05:05,734 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:05:05,757 - captureLoop - Time - Camera1: capturing frame 27 at layer 10 after 20 seconds 2023-02-07 10:05:06,827 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:05:06,828 - gcodeLoop - Getting Status 2023-02-07 10:05:06,829 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:05:07,430 - captureLoop - Command Success : ffmpeg -threads 1 -loglevel quiet -y -i http://cam.local:8081 -vframes 1 -threads 1 /home/pi/ftp/files/DuetLapse/octopi/192-168-1-8/598_1_printer_square_calibration/Camera1_00000027.jpeg 2023-02-07 10:05:07,431 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 10:05:07,431 - captureLoop - Getting Status 2023-02-07 10:05:07,431 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:05:11,863 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:05:11,864 - gcodeLoop - Getting Status 2023-02-07 10:05:11,864 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:05:16,896 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:05:16,897 - gcodeLoop - Getting Status 2023-02-07 10:05:16,898 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:05:17,463 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 10:05:17,464 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 10:05:17,573 - captureLoop - elapsed: 10.142791509628296 2023-02-07 10:05:17,574 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 10:05:17,575 - captureLoop - Getting Status 2023-02-07 10:05:17,575 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:05:21,937 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:05:21,938 - gcodeLoop - Getting Status 2023-02-07 10:05:21,940 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:05:26,993 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:05:26,993 - gcodeLoop - Getting Status 2023-02-07 10:05:26,996 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:05:27,616 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 10:05:27,618 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 10:05:27,705 - captureLoop - elapsed: 20.27427911758423 2023-02-07 10:05:27,705 - captureLoop - Calling function Status from Check for Pause with rr_model 2023-02-07 10:05:27,706 - captureLoop - Getting Status 2023-02-07 10:05:27,706 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:05:27,732 - captureLoop - Time - Camera1: capturing frame 28 at layer 10 after 20 seconds 2023-02-07 10:05:29,387 - captureLoop - Command Success : ffmpeg -threads 1 -loglevel quiet -y -i http://cam.local:8081 -vframes 1 -threads 1 /home/pi/ftp/files/DuetLapse/octopi/192-168-1-8/598_1_printer_square_calibration/Camera1_00000028.jpeg 2023-02-07 10:05:29,388 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 10:05:29,388 - captureLoop - Getting Status 2023-02-07 10:05:29,388 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:05:32,026 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:05:32,027 - gcodeLoop - Getting Status 2023-02-07 10:05:32,028 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:05:37,056 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:05:37,057 - gcodeLoop - Getting Status 2023-02-07 10:05:37,060 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:05:39,456 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 10:05:39,457 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 10:05:39,491 - captureLoop - elapsed: 10.102914333343506 2023-02-07 10:05:39,492 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 10:05:39,492 - captureLoop - Getting Status 2023-02-07 10:05:39,493 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:05:42,097 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:05:42,099 - gcodeLoop - Getting Status 2023-02-07 10:05:42,100 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:05:47,130 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:05:47,131 - gcodeLoop - Getting Status 2023-02-07 10:05:47,135 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:05:49,548 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 10:05:49,548 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 10:05:49,567 - captureLoop - elapsed: 20.179790019989014 2023-02-07 10:05:49,568 - captureLoop - Calling function Status from Check for Pause with rr_model 2023-02-07 10:05:49,568 - captureLoop - Getting Status 2023-02-07 10:05:49,569 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:05:49,594 - captureLoop - Time - Camera1: capturing frame 29 at layer 10 after 20 seconds 2023-02-07 10:05:51,298 - captureLoop - Command Success : ffmpeg -threads 1 -loglevel quiet -y -i http://cam.local:8081 -vframes 1 -threads 1 /home/pi/ftp/files/DuetLapse/octopi/192-168-1-8/598_1_printer_square_calibration/Camera1_00000029.jpeg 2023-02-07 10:05:51,299 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 10:05:51,299 - captureLoop - Getting Status 2023-02-07 10:05:51,300 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:05:52,291 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:05:52,292 - gcodeLoop - Getting Status 2023-02-07 10:05:52,292 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:05:57,399 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:05:57,400 - gcodeLoop - Getting Status 2023-02-07 10:05:57,405 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:06:01,378 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 10:06:01,379 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 10:06:01,410 - captureLoop - elapsed: 10.110742092132568 2023-02-07 10:06:01,411 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 10:06:01,411 - captureLoop - Getting Status 2023-02-07 10:06:01,412 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:06:02,521 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:06:02,522 - gcodeLoop - Getting Status 2023-02-07 10:06:02,522 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:06:07,566 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:06:07,567 - gcodeLoop - Getting Status 2023-02-07 10:06:07,567 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:06:11,451 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 10:06:11,452 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 10:06:11,540 - captureLoop - elapsed: 20.24148440361023 2023-02-07 10:06:11,541 - captureLoop - Calling function Status from Check for Pause with rr_model 2023-02-07 10:06:11,542 - captureLoop - Getting Status 2023-02-07 10:06:11,542 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:06:11,571 - captureLoop - Time - Camera1: capturing frame 30 at layer 11 after 20 seconds 2023-02-07 10:06:12,600 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:06:12,604 - gcodeLoop - Getting Status 2023-02-07 10:06:12,605 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:06:13,318 - captureLoop - Command Success : ffmpeg -threads 1 -loglevel quiet -y -i http://cam.local:8081 -vframes 1 -threads 1 /home/pi/ftp/files/DuetLapse/octopi/192-168-1-8/598_1_printer_square_calibration/Camera1_00000030.jpeg 2023-02-07 10:06:13,319 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 10:06:13,319 - captureLoop - Getting Status 2023-02-07 10:06:13,319 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:06:17,676 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:06:17,677 - gcodeLoop - Getting Status 2023-02-07 10:06:17,677 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:06:22,707 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:06:22,708 - gcodeLoop - Getting Status 2023-02-07 10:06:22,709 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:06:23,356 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 10:06:23,357 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 10:06:23,415 - captureLoop - elapsed: 10.096219778060913 2023-02-07 10:06:23,416 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 10:06:23,416 - captureLoop - Getting Status 2023-02-07 10:06:23,417 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:06:27,746 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:06:27,746 - gcodeLoop - Getting Status 2023-02-07 10:06:27,749 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:06:32,872 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:06:32,873 - gcodeLoop - Getting Status 2023-02-07 10:06:32,876 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:06:33,459 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 10:06:33,459 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 10:06:33,481 - captureLoop - elapsed: 20.16265320777893 2023-02-07 10:06:33,482 - captureLoop - Calling function Status from Check for Pause with rr_model 2023-02-07 10:06:33,482 - captureLoop - Getting Status 2023-02-07 10:06:33,483 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:06:33,503 - captureLoop - Time - Camera1: capturing frame 31 at layer 11 after 20 seconds 2023-02-07 10:06:35,125 - captureLoop - Command Success : ffmpeg -threads 1 -loglevel quiet -y -i http://cam.local:8081 -vframes 1 -threads 1 /home/pi/ftp/files/DuetLapse/octopi/192-168-1-8/598_1_printer_square_calibration/Camera1_00000031.jpeg 2023-02-07 10:06:35,126 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 10:06:35,127 - captureLoop - Getting Status 2023-02-07 10:06:35,127 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:06:37,917 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:06:37,921 - gcodeLoop - Getting Status 2023-02-07 10:06:37,921 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:06:42,961 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:06:42,962 - gcodeLoop - Getting Status 2023-02-07 10:06:42,963 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:06:45,164 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 10:06:45,165 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 10:06:45,194 - captureLoop - elapsed: 10.068031072616577 2023-02-07 10:06:45,196 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 10:06:45,196 - captureLoop - Getting Status 2023-02-07 10:06:45,197 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:06:48,014 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:06:48,015 - gcodeLoop - Getting Status 2023-02-07 10:06:48,018 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:06:53,048 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:06:53,049 - gcodeLoop - Getting Status 2023-02-07 10:06:53,051 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:06:55,243 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 10:06:55,244 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 10:06:55,267 - captureLoop - elapsed: 20.14111828804016 2023-02-07 10:06:55,268 - captureLoop - Calling function Status from Check for Pause with rr_model 2023-02-07 10:06:55,269 - captureLoop - Getting Status 2023-02-07 10:06:55,269 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:06:55,299 - captureLoop - Time - Camera1: capturing frame 32 at layer 12 after 20 seconds 2023-02-07 10:06:56,991 - captureLoop - Command Success : ffmpeg -threads 1 -loglevel quiet -y -i http://cam.local:8081 -vframes 1 -threads 1 /home/pi/ftp/files/DuetLapse/octopi/192-168-1-8/598_1_printer_square_calibration/Camera1_00000032.jpeg 2023-02-07 10:06:56,992 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 10:06:56,992 - captureLoop - Getting Status 2023-02-07 10:06:56,993 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:06:58,202 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:06:58,203 - gcodeLoop - Getting Status 2023-02-07 10:06:58,203 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:07:03,238 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:07:03,239 - gcodeLoop - Getting Status 2023-02-07 10:07:03,240 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:07:07,028 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 10:07:07,029 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 10:07:07,066 - captureLoop - elapsed: 10.074167490005493 2023-02-07 10:07:07,067 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 10:07:07,068 - captureLoop - Getting Status 2023-02-07 10:07:07,068 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:07:08,291 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:07:08,292 - gcodeLoop - Getting Status 2023-02-07 10:07:08,295 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:07:13,334 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:07:13,335 - gcodeLoop - Getting Status 2023-02-07 10:07:13,339 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:07:17,133 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 10:07:17,134 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 10:07:17,171 - captureLoop - elapsed: 20.178774118423462 2023-02-07 10:07:17,172 - captureLoop - Calling function Status from Check for Pause with rr_model 2023-02-07 10:07:17,173 - captureLoop - Getting Status 2023-02-07 10:07:17,173 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:07:17,204 - captureLoop - Time - Camera1: capturing frame 33 at layer 12 after 20 seconds 2023-02-07 10:07:18,377 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:07:18,378 - gcodeLoop - Getting Status 2023-02-07 10:07:18,381 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:07:18,951 - captureLoop - Command Success : ffmpeg -threads 1 -loglevel quiet -y -i http://cam.local:8081 -vframes 1 -threads 1 /home/pi/ftp/files/DuetLapse/octopi/192-168-1-8/598_1_printer_square_calibration/Camera1_00000033.jpeg 2023-02-07 10:07:18,951 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 10:07:18,952 - captureLoop - Getting Status 2023-02-07 10:07:18,952 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:07:23,412 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:07:23,414 - gcodeLoop - Getting Status 2023-02-07 10:07:23,414 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:07:28,453 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:07:28,454 - gcodeLoop - Getting Status 2023-02-07 10:07:28,457 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:07:29,016 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 10:07:29,017 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 10:07:29,056 - captureLoop - elapsed: 10.10451602935791 2023-02-07 10:07:29,057 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 10:07:29,058 - captureLoop - Getting Status 2023-02-07 10:07:29,059 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:07:33,520 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:07:33,520 - gcodeLoop - Getting Status 2023-02-07 10:07:33,523 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:07:38,566 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:07:38,569 - gcodeLoop - Getting Status 2023-02-07 10:07:38,569 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:07:39,097 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 10:07:39,098 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 10:07:39,134 - captureLoop - elapsed: 20.1829731464386 2023-02-07 10:07:39,135 - captureLoop - Calling function Status from Check for Pause with rr_model 2023-02-07 10:07:39,135 - captureLoop - Getting Status 2023-02-07 10:07:39,136 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:07:39,165 - captureLoop - Time - Camera1: capturing frame 34 at layer 12 after 20 seconds 2023-02-07 10:07:40,940 - captureLoop - Command Success : ffmpeg -threads 1 -loglevel quiet -y -i http://cam.local:8081 -vframes 1 -threads 1 /home/pi/ftp/files/DuetLapse/octopi/192-168-1-8/598_1_printer_square_calibration/Camera1_00000034.jpeg 2023-02-07 10:07:40,941 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 10:07:40,941 - captureLoop - Getting Status 2023-02-07 10:07:40,942 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:07:43,606 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:07:43,607 - gcodeLoop - Getting Status 2023-02-07 10:07:43,608 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:07:48,706 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:07:48,707 - gcodeLoop - Getting Status 2023-02-07 10:07:48,707 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:07:50,985 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 10:07:50,986 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 10:07:51,012 - captureLoop - elapsed: 10.071598291397095 2023-02-07 10:07:51,014 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 10:07:51,015 - captureLoop - Getting Status 2023-02-07 10:07:51,015 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:07:53,763 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:07:53,764 - gcodeLoop - Getting Status 2023-02-07 10:07:53,764 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:07:58,795 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:07:58,797 - gcodeLoop - Getting Status 2023-02-07 10:07:58,801 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:08:01,076 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 10:08:01,077 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 10:08:01,208 - captureLoop - elapsed: 20.26755404472351 2023-02-07 10:08:01,209 - captureLoop - Calling function Status from Check for Pause with rr_model 2023-02-07 10:08:01,209 - captureLoop - Getting Status 2023-02-07 10:08:01,210 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:08:01,241 - captureLoop - Time - Camera1: capturing frame 35 at layer 13 after 20 seconds 2023-02-07 10:08:02,922 - captureLoop - Command Success : ffmpeg -threads 1 -loglevel quiet -y -i http://cam.local:8081 -vframes 1 -threads 1 /home/pi/ftp/files/DuetLapse/octopi/192-168-1-8/598_1_printer_square_calibration/Camera1_00000035.jpeg 2023-02-07 10:08:02,923 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 10:08:02,924 - captureLoop - Getting Status 2023-02-07 10:08:02,924 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:08:03,872 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:08:03,873 - gcodeLoop - Getting Status 2023-02-07 10:08:03,874 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:08:08,994 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:08:08,995 - gcodeLoop - Getting Status 2023-02-07 10:08:09,001 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:08:12,965 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 10:08:12,966 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 10:08:13,087 - captureLoop - elapsed: 10.163849353790283 2023-02-07 10:08:13,088 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 10:08:13,088 - captureLoop - Getting Status 2023-02-07 10:08:13,088 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:08:14,042 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:08:14,042 - gcodeLoop - Getting Status 2023-02-07 10:08:14,045 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:08:19,127 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:08:19,128 - gcodeLoop - Getting Status 2023-02-07 10:08:19,131 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:08:23,120 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 10:08:23,121 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 10:08:23,228 - captureLoop - elapsed: 20.30492353439331 2023-02-07 10:08:23,229 - captureLoop - Calling function Status from Check for Pause with rr_model 2023-02-07 10:08:23,230 - captureLoop - Getting Status 2023-02-07 10:08:23,231 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:08:23,260 - captureLoop - Time - Camera1: capturing frame 36 at layer 13 after 20 seconds 2023-02-07 10:08:24,244 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:08:24,245 - gcodeLoop - Getting Status 2023-02-07 10:08:24,246 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:08:24,929 - captureLoop - Command Success : ffmpeg -threads 1 -loglevel quiet -y -i http://cam.local:8081 -vframes 1 -threads 1 /home/pi/ftp/files/DuetLapse/octopi/192-168-1-8/598_1_printer_square_calibration/Camera1_00000036.jpeg 2023-02-07 10:08:24,930 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 10:08:24,930 - captureLoop - Getting Status 2023-02-07 10:08:24,930 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:08:29,371 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:08:29,372 - gcodeLoop - Getting Status 2023-02-07 10:08:29,373 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:08:34,437 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:08:34,438 - gcodeLoop - Getting Status 2023-02-07 10:08:34,440 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:08:34,982 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 10:08:34,983 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 10:08:35,105 - captureLoop - elapsed: 10.175348281860352 2023-02-07 10:08:35,106 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 10:08:35,107 - captureLoop - Getting Status 2023-02-07 10:08:35,107 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:08:39,503 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:08:39,504 - gcodeLoop - Getting Status 2023-02-07 10:08:39,507 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:08:44,549 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:08:44,550 - gcodeLoop - Getting Status 2023-02-07 10:08:44,551 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:08:45,157 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 10:08:45,158 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 10:08:45,249 - captureLoop - elapsed: 20.31869626045227 2023-02-07 10:08:45,249 - captureLoop - Calling function Status from Check for Pause with rr_model 2023-02-07 10:08:45,250 - captureLoop - Getting Status 2023-02-07 10:08:45,251 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:08:45,281 - captureLoop - Time - Camera1: capturing frame 37 at layer 14 after 20 seconds 2023-02-07 10:08:47,037 - captureLoop - Command Success : ffmpeg -threads 1 -loglevel quiet -y -i http://cam.local:8081 -vframes 1 -threads 1 /home/pi/ftp/files/DuetLapse/octopi/192-168-1-8/598_1_printer_square_calibration/Camera1_00000037.jpeg 2023-02-07 10:08:47,038 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 10:08:47,039 - captureLoop - Getting Status 2023-02-07 10:08:47,039 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:08:49,588 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:08:49,589 - gcodeLoop - Getting Status 2023-02-07 10:08:49,590 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:08:54,629 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:08:54,630 - gcodeLoop - Getting Status 2023-02-07 10:08:54,631 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:08:57,081 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 10:08:57,082 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 10:08:57,111 - captureLoop - elapsed: 10.073000192642212 2023-02-07 10:08:57,112 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 10:08:57,113 - captureLoop - Getting Status 2023-02-07 10:08:57,114 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:08:59,778 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:08:59,778 - gcodeLoop - Getting Status 2023-02-07 10:08:59,782 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:09:04,814 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:09:04,815 - gcodeLoop - Getting Status 2023-02-07 10:09:04,815 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:09:07,165 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 10:09:07,166 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 10:09:07,194 - captureLoop - elapsed: 20.155672788619995 2023-02-07 10:09:07,195 - captureLoop - Calling function Status from Check for Pause with rr_model 2023-02-07 10:09:07,196 - captureLoop - Getting Status 2023-02-07 10:09:07,197 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:09:07,226 - captureLoop - Time - Camera1: capturing frame 38 at layer 14 after 20 seconds 2023-02-07 10:09:08,930 - captureLoop - Command Success : ffmpeg -threads 1 -loglevel quiet -y -i http://cam.local:8081 -vframes 1 -threads 1 /home/pi/ftp/files/DuetLapse/octopi/192-168-1-8/598_1_printer_square_calibration/Camera1_00000038.jpeg 2023-02-07 10:09:08,931 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 10:09:08,931 - captureLoop - Getting Status 2023-02-07 10:09:08,932 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:09:09,846 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:09:09,847 - gcodeLoop - Getting Status 2023-02-07 10:09:09,851 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:09:14,917 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:09:14,918 - gcodeLoop - Getting Status 2023-02-07 10:09:14,930 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:09:18,984 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 10:09:18,985 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 10:09:19,060 - captureLoop - elapsed: 10.129066705703735 2023-02-07 10:09:19,061 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 10:09:19,061 - captureLoop - Getting Status 2023-02-07 10:09:19,062 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:09:19,975 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:09:19,976 - gcodeLoop - Getting Status 2023-02-07 10:09:19,978 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:09:25,010 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:09:25,011 - gcodeLoop - Getting Status 2023-02-07 10:09:25,014 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:09:29,108 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 10:09:29,109 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 10:09:29,139 - captureLoop - elapsed: 20.207932472229004 2023-02-07 10:09:29,140 - captureLoop - Calling function Status from Check for Pause with rr_model 2023-02-07 10:09:29,140 - captureLoop - Getting Status 2023-02-07 10:09:29,141 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:09:29,188 - captureLoop - Time - Camera1: capturing frame 39 at layer 14 after 20 seconds 2023-02-07 10:09:30,088 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:09:30,091 - gcodeLoop - Getting Status 2023-02-07 10:09:30,092 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:09:30,856 - captureLoop - Command Success : ffmpeg -threads 1 -loglevel quiet -y -i http://cam.local:8081 -vframes 1 -threads 1 /home/pi/ftp/files/DuetLapse/octopi/192-168-1-8/598_1_printer_square_calibration/Camera1_00000039.jpeg 2023-02-07 10:09:30,857 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 10:09:30,857 - captureLoop - Getting Status 2023-02-07 10:09:30,858 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:09:35,124 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:09:35,124 - gcodeLoop - Getting Status 2023-02-07 10:09:35,125 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:09:40,157 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:09:40,157 - gcodeLoop - Getting Status 2023-02-07 10:09:40,158 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:09:40,886 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 10:09:40,887 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 10:09:40,914 - captureLoop - elapsed: 10.057575702667236 2023-02-07 10:09:40,915 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 10:09:40,916 - captureLoop - Getting Status 2023-02-07 10:09:40,917 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:09:45,186 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:09:45,186 - gcodeLoop - Getting Status 2023-02-07 10:09:45,187 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:09:50,217 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:09:50,218 - gcodeLoop - Getting Status 2023-02-07 10:09:50,218 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:09:50,956 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 10:09:50,956 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 10:09:50,979 - captureLoop - elapsed: 20.12265396118164 2023-02-07 10:09:50,980 - captureLoop - Calling function Status from Check for Pause with rr_model 2023-02-07 10:09:50,980 - captureLoop - Getting Status 2023-02-07 10:09:50,981 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:09:51,026 - captureLoop - Time - Camera1: capturing frame 40 at layer 15 after 20 seconds 2023-02-07 10:09:52,668 - captureLoop - Command Success : ffmpeg -threads 1 -loglevel quiet -y -i http://cam.local:8081 -vframes 1 -threads 1 /home/pi/ftp/files/DuetLapse/octopi/192-168-1-8/598_1_printer_square_calibration/Camera1_00000040.jpeg 2023-02-07 10:09:52,668 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 10:09:52,669 - captureLoop - Getting Status 2023-02-07 10:09:52,669 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:09:55,276 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:09:55,277 - gcodeLoop - Getting Status 2023-02-07 10:09:55,281 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:10:00,326 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:10:00,327 - gcodeLoop - Getting Status 2023-02-07 10:10:00,331 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:10:02,736 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 10:10:02,736 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 10:10:02,862 - captureLoop - elapsed: 10.193907499313354 2023-02-07 10:10:02,863 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 10:10:02,863 - captureLoop - Getting Status 2023-02-07 10:10:02,864 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:10:05,367 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:10:05,368 - gcodeLoop - Getting Status 2023-02-07 10:10:05,369 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:10:10,408 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:10:10,409 - gcodeLoop - Getting Status 2023-02-07 10:10:10,413 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:10:12,896 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 10:10:12,897 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 10:10:12,924 - captureLoop - elapsed: 20.255606412887573 2023-02-07 10:10:12,925 - captureLoop - Calling function Status from Check for Pause with rr_model 2023-02-07 10:10:12,925 - captureLoop - Getting Status 2023-02-07 10:10:12,926 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:10:12,951 - captureLoop - Time - Camera1: capturing frame 41 at layer 15 after 20 seconds 2023-02-07 10:10:14,685 - captureLoop - Command Success : ffmpeg -threads 1 -loglevel quiet -y -i http://cam.local:8081 -vframes 1 -threads 1 /home/pi/ftp/files/DuetLapse/octopi/192-168-1-8/598_1_printer_square_calibration/Camera1_00000041.jpeg 2023-02-07 10:10:14,685 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 10:10:14,686 - captureLoop - Getting Status 2023-02-07 10:10:14,686 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:10:15,455 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:10:15,456 - gcodeLoop - Getting Status 2023-02-07 10:10:15,460 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:10:20,503 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:10:20,504 - gcodeLoop - Getting Status 2023-02-07 10:10:20,507 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:10:24,723 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 10:10:24,724 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 10:10:24,779 - captureLoop - elapsed: 10.09399700164795 2023-02-07 10:10:24,781 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 10:10:24,782 - captureLoop - Getting Status 2023-02-07 10:10:24,782 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:10:25,550 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:10:25,550 - gcodeLoop - Getting Status 2023-02-07 10:10:25,550 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:10:30,576 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:10:30,577 - gcodeLoop - Getting Status 2023-02-07 10:10:30,579 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:10:34,821 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 10:10:34,822 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 10:10:34,921 - captureLoop - elapsed: 20.235594511032104 2023-02-07 10:10:34,925 - captureLoop - Calling function Status from Check for Pause with rr_model 2023-02-07 10:10:34,926 - captureLoop - Getting Status 2023-02-07 10:10:34,927 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:10:34,957 - captureLoop - Time - Camera1: capturing frame 42 at layer 16 after 20 seconds 2023-02-07 10:10:35,621 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:10:35,625 - gcodeLoop - Getting Status 2023-02-07 10:10:35,625 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:10:36,663 - captureLoop - Command Success : ffmpeg -threads 1 -loglevel quiet -y -i http://cam.local:8081 -vframes 1 -threads 1 /home/pi/ftp/files/DuetLapse/octopi/192-168-1-8/598_1_printer_square_calibration/Camera1_00000042.jpeg 2023-02-07 10:10:36,663 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 10:10:36,664 - captureLoop - Getting Status 2023-02-07 10:10:36,664 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:10:40,739 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:10:40,740 - gcodeLoop - Getting Status 2023-02-07 10:10:40,741 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:10:45,781 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:10:45,782 - gcodeLoop - Getting Status 2023-02-07 10:10:45,782 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:10:46,803 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 10:10:46,804 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 10:10:46,898 - captureLoop - elapsed: 10.234456777572632 2023-02-07 10:10:46,899 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 10:10:46,899 - captureLoop - Getting Status 2023-02-07 10:10:46,900 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:10:50,884 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:10:50,886 - gcodeLoop - Getting Status 2023-02-07 10:10:50,890 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:10:55,947 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:10:55,948 - gcodeLoop - Getting Status 2023-02-07 10:10:55,950 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:10:56,945 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 10:10:56,946 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 10:10:56,971 - captureLoop - elapsed: 20.307939529418945 2023-02-07 10:10:56,972 - captureLoop - Calling function Status from Check for Pause with rr_model 2023-02-07 10:10:56,973 - captureLoop - Getting Status 2023-02-07 10:10:56,973 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:10:57,010 - captureLoop - Time - Camera1: capturing frame 43 at layer 16 after 20 seconds 2023-02-07 10:10:58,722 - captureLoop - Command Success : ffmpeg -threads 1 -loglevel quiet -y -i http://cam.local:8081 -vframes 1 -threads 1 /home/pi/ftp/files/DuetLapse/octopi/192-168-1-8/598_1_printer_square_calibration/Camera1_00000043.jpeg 2023-02-07 10:10:58,723 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 10:10:58,723 - captureLoop - Getting Status 2023-02-07 10:10:58,723 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:11:01,015 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:11:01,016 - gcodeLoop - Getting Status 2023-02-07 10:11:01,020 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:11:06,141 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:11:06,142 - gcodeLoop - Getting Status 2023-02-07 10:11:06,142 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:11:08,786 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 10:11:08,787 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 10:11:08,811 - captureLoop - elapsed: 10.088510036468506 2023-02-07 10:11:08,812 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 10:11:08,813 - captureLoop - Getting Status 2023-02-07 10:11:08,813 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:11:11,268 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:11:11,269 - gcodeLoop - Getting Status 2023-02-07 10:11:11,272 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:11:16,311 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:11:16,311 - gcodeLoop - Getting Status 2023-02-07 10:11:16,312 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:11:18,856 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 10:11:18,856 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 10:11:18,876 - captureLoop - elapsed: 20.153358936309814 2023-02-07 10:11:18,877 - captureLoop - Calling function Status from Check for Pause with rr_model 2023-02-07 10:11:18,877 - captureLoop - Getting Status 2023-02-07 10:11:18,877 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:11:18,903 - captureLoop - Time - Camera1: capturing frame 44 at layer 16 after 20 seconds 2023-02-07 10:11:20,580 - captureLoop - Command Success : ffmpeg -threads 1 -loglevel quiet -y -i http://cam.local:8081 -vframes 1 -threads 1 /home/pi/ftp/files/DuetLapse/octopi/192-168-1-8/598_1_printer_square_calibration/Camera1_00000044.jpeg 2023-02-07 10:11:20,581 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 10:11:20,581 - captureLoop - Getting Status 2023-02-07 10:11:20,581 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:11:21,354 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:11:21,355 - gcodeLoop - Getting Status 2023-02-07 10:11:21,360 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:11:26,398 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:11:26,399 - gcodeLoop - Getting Status 2023-02-07 10:11:26,399 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:11:30,609 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 10:11:30,610 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 10:11:30,726 - captureLoop - elapsed: 10.145408868789673 2023-02-07 10:11:30,727 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 10:11:30,727 - captureLoop - Getting Status 2023-02-07 10:11:30,728 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:11:31,532 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:11:31,623 - gcodeLoop - Getting Status 2023-02-07 10:11:31,624 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:11:36,752 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:11:36,753 - gcodeLoop - Getting Status 2023-02-07 10:11:36,757 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:11:40,770 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 10:11:40,771 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 10:11:40,799 - captureLoop - elapsed: 20.218244314193726 2023-02-07 10:11:40,800 - captureLoop - Calling function Status from Check for Pause with rr_model 2023-02-07 10:11:40,801 - captureLoop - Getting Status 2023-02-07 10:11:40,801 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:11:40,834 - captureLoop - Time - Camera1: capturing frame 45 at layer 17 after 20 seconds 2023-02-07 10:11:41,879 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:11:41,880 - gcodeLoop - Getting Status 2023-02-07 10:11:41,883 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:11:42,560 - captureLoop - Command Success : ffmpeg -threads 1 -loglevel quiet -y -i http://cam.local:8081 -vframes 1 -threads 1 /home/pi/ftp/files/DuetLapse/octopi/192-168-1-8/598_1_printer_square_calibration/Camera1_00000045.jpeg 2023-02-07 10:11:42,561 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 10:11:42,561 - captureLoop - Getting Status 2023-02-07 10:11:42,561 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:11:46,912 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:11:46,913 - gcodeLoop - Getting Status 2023-02-07 10:11:46,917 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:11:51,956 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:11:51,957 - gcodeLoop - Getting Status 2023-02-07 10:11:51,964 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:11:52,603 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 10:11:52,604 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 10:11:52,740 - captureLoop - elapsed: 10.179699659347534 2023-02-07 10:11:52,741 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 10:11:52,742 - captureLoop - Getting Status 2023-02-07 10:11:52,742 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:11:56,998 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:11:56,999 - gcodeLoop - Getting Status 2023-02-07 10:11:56,999 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:12:02,044 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:12:02,045 - gcodeLoop - Getting Status 2023-02-07 10:12:02,046 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:12:02,786 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 10:12:02,786 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 10:12:02,885 - captureLoop - elapsed: 20.324308395385742 2023-02-07 10:12:02,886 - captureLoop - Calling function Status from Check for Pause with rr_model 2023-02-07 10:12:02,887 - captureLoop - Getting Status 2023-02-07 10:12:02,887 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:12:02,937 - captureLoop - Time - Camera1: capturing frame 46 at layer 17 after 20 seconds 2023-02-07 10:12:04,663 - captureLoop - Command Success : ffmpeg -threads 1 -loglevel quiet -y -i http://cam.local:8081 -vframes 1 -threads 1 /home/pi/ftp/files/DuetLapse/octopi/192-168-1-8/598_1_printer_square_calibration/Camera1_00000046.jpeg 2023-02-07 10:12:04,664 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 10:12:04,664 - captureLoop - Getting Status 2023-02-07 10:12:04,665 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:12:07,173 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:12:07,174 - gcodeLoop - Getting Status 2023-02-07 10:12:07,175 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:12:12,215 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:12:12,216 - gcodeLoop - Getting Status 2023-02-07 10:12:12,219 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:12:14,696 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 10:12:14,697 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 10:12:14,719 - captureLoop - elapsed: 10.055105447769165 2023-02-07 10:12:14,720 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 10:12:14,720 - captureLoop - Getting Status 2023-02-07 10:12:14,720 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:12:17,256 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:12:17,257 - gcodeLoop - Getting Status 2023-02-07 10:12:17,260 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:12:22,301 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:12:22,301 - gcodeLoop - Getting Status 2023-02-07 10:12:22,304 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:12:24,747 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 10:12:24,748 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 10:12:24,791 - captureLoop - elapsed: 20.127077102661133 2023-02-07 10:12:24,792 - captureLoop - Calling function Status from Check for Pause with rr_model 2023-02-07 10:12:24,793 - captureLoop - Getting Status 2023-02-07 10:12:24,794 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:12:24,824 - captureLoop - Time - Camera1: capturing frame 47 at layer 18 after 20 seconds 2023-02-07 10:12:26,478 - captureLoop - Command Success : ffmpeg -threads 1 -loglevel quiet -y -i http://cam.local:8081 -vframes 1 -threads 1 /home/pi/ftp/files/DuetLapse/octopi/192-168-1-8/598_1_printer_square_calibration/Camera1_00000047.jpeg 2023-02-07 10:12:26,478 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 10:12:26,479 - captureLoop - Getting Status 2023-02-07 10:12:26,479 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:12:27,449 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:12:27,450 - gcodeLoop - Getting Status 2023-02-07 10:12:27,453 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:12:32,537 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:12:32,538 - gcodeLoop - Getting Status 2023-02-07 10:12:32,540 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:12:36,515 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 10:12:36,515 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 10:12:36,566 - captureLoop - elapsed: 10.088051080703735 2023-02-07 10:12:36,567 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 10:12:36,567 - captureLoop - Getting Status 2023-02-07 10:12:36,568 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:12:37,583 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:12:37,584 - gcodeLoop - Getting Status 2023-02-07 10:12:37,584 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:12:42,699 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:12:42,700 - gcodeLoop - Getting Status 2023-02-07 10:12:42,704 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:12:46,600 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 10:12:46,601 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 10:12:46,635 - captureLoop - elapsed: 20.156694173812866 2023-02-07 10:12:46,636 - captureLoop - Calling function Status from Check for Pause with rr_model 2023-02-07 10:12:46,637 - captureLoop - Getting Status 2023-02-07 10:12:46,637 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:12:46,667 - captureLoop - Time - Camera1: capturing frame 48 at layer 18 after 20 seconds 2023-02-07 10:12:47,764 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:12:47,765 - gcodeLoop - Getting Status 2023-02-07 10:12:47,765 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:12:48,337 - captureLoop - Command Success : ffmpeg -threads 1 -loglevel quiet -y -i http://cam.local:8081 -vframes 1 -threads 1 /home/pi/ftp/files/DuetLapse/octopi/192-168-1-8/598_1_printer_square_calibration/Camera1_00000048.jpeg 2023-02-07 10:12:48,338 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 10:12:48,338 - captureLoop - Getting Status 2023-02-07 10:12:48,339 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:12:52,799 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:12:52,800 - gcodeLoop - Getting Status 2023-02-07 10:12:52,805 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:12:57,875 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:12:57,876 - gcodeLoop - Getting Status 2023-02-07 10:12:57,926 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:12:58,376 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 10:12:58,377 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 10:12:58,483 - captureLoop - elapsed: 10.145013093948364 2023-02-07 10:12:58,484 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 10:12:58,485 - captureLoop - Getting Status 2023-02-07 10:12:58,486 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:13:02,982 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:13:02,983 - gcodeLoop - Getting Status 2023-02-07 10:13:02,984 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:13:08,026 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:13:08,027 - gcodeLoop - Getting Status 2023-02-07 10:13:08,031 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:13:08,531 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 10:13:08,532 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 10:13:08,619 - captureLoop - elapsed: 20.280797958374023 2023-02-07 10:13:08,621 - captureLoop - Calling function Status from Check for Pause with rr_model 2023-02-07 10:13:08,621 - captureLoop - Getting Status 2023-02-07 10:13:08,622 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:13:08,651 - captureLoop - Time - Camera1: capturing frame 49 at layer 18 after 20 seconds 2023-02-07 10:13:10,430 - captureLoop - Command Success : ffmpeg -threads 1 -loglevel quiet -y -i http://cam.local:8081 -vframes 1 -threads 1 /home/pi/ftp/files/DuetLapse/octopi/192-168-1-8/598_1_printer_square_calibration/Camera1_00000049.jpeg 2023-02-07 10:13:10,431 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 10:13:10,431 - captureLoop - Getting Status 2023-02-07 10:13:10,431 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:13:13,138 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:13:13,139 - gcodeLoop - Getting Status 2023-02-07 10:13:13,140 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:13:18,183 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:13:18,184 - gcodeLoop - Getting Status 2023-02-07 10:13:18,187 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:13:20,484 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 10:13:20,485 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 10:13:20,603 - captureLoop - elapsed: 10.172375202178955 2023-02-07 10:13:20,604 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 10:13:20,605 - captureLoop - Getting Status 2023-02-07 10:13:20,605 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:13:23,275 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:13:23,276 - gcodeLoop - Getting Status 2023-02-07 10:13:23,276 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:13:28,312 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:13:28,312 - gcodeLoop - Getting Status 2023-02-07 10:13:28,313 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:13:30,646 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 10:13:30,647 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 10:13:30,675 - captureLoop - elapsed: 20.244072437286377 2023-02-07 10:13:30,677 - captureLoop - Calling function Status from Check for Pause with rr_model 2023-02-07 10:13:30,677 - captureLoop - Getting Status 2023-02-07 10:13:30,678 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:13:30,710 - captureLoop - Time - Camera1: capturing frame 50 at layer 19 after 20 seconds 2023-02-07 10:13:32,431 - captureLoop - Command Success : ffmpeg -threads 1 -loglevel quiet -y -i http://cam.local:8081 -vframes 1 -threads 1 /home/pi/ftp/files/DuetLapse/octopi/192-168-1-8/598_1_printer_square_calibration/Camera1_00000050.jpeg 2023-02-07 10:13:32,432 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 10:13:32,433 - captureLoop - Getting Status 2023-02-07 10:13:32,433 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:13:33,395 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:13:33,396 - gcodeLoop - Getting Status 2023-02-07 10:13:33,400 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:13:38,444 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:13:38,445 - gcodeLoop - Getting Status 2023-02-07 10:13:38,448 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:13:42,483 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 10:13:42,484 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 10:13:42,513 - captureLoop - elapsed: 10.081129550933838 2023-02-07 10:13:42,514 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 10:13:42,515 - captureLoop - Getting Status 2023-02-07 10:13:42,515 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:13:43,485 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:13:43,486 - gcodeLoop - Getting Status 2023-02-07 10:13:43,486 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:13:48,520 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:13:48,521 - gcodeLoop - Getting Status 2023-02-07 10:13:48,523 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:13:52,592 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 10:13:52,593 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 10:13:52,638 - captureLoop - elapsed: 20.205976247787476 2023-02-07 10:13:52,639 - captureLoop - Calling function Status from Check for Pause with rr_model 2023-02-07 10:13:52,639 - captureLoop - Getting Status 2023-02-07 10:13:52,639 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:13:52,664 - captureLoop - Time - Camera1: capturing frame 51 at layer 19 after 20 seconds 2023-02-07 10:13:53,683 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:13:53,684 - gcodeLoop - Getting Status 2023-02-07 10:13:53,684 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:13:54,327 - captureLoop - Command Success : ffmpeg -threads 1 -loglevel quiet -y -i http://cam.local:8081 -vframes 1 -threads 1 /home/pi/ftp/files/DuetLapse/octopi/192-168-1-8/598_1_printer_square_calibration/Camera1_00000051.jpeg 2023-02-07 10:13:54,327 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 10:13:54,328 - captureLoop - Getting Status 2023-02-07 10:13:54,328 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:13:58,721 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:13:58,722 - gcodeLoop - Getting Status 2023-02-07 10:13:58,725 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:14:03,807 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:14:03,808 - gcodeLoop - Getting Status 2023-02-07 10:14:03,809 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:14:04,365 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 10:14:04,367 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 10:14:04,400 - captureLoop - elapsed: 10.072312831878662 2023-02-07 10:14:04,401 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 10:14:04,401 - captureLoop - Getting Status 2023-02-07 10:14:04,402 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:14:08,843 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:14:08,844 - gcodeLoop - Getting Status 2023-02-07 10:14:08,845 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:14:13,890 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:14:13,891 - gcodeLoop - Getting Status 2023-02-07 10:14:13,894 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:14:14,449 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 10:14:14,450 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 10:14:14,482 - captureLoop - elapsed: 20.15454649925232 2023-02-07 10:14:14,483 - captureLoop - Calling function Status from Check for Pause with rr_model 2023-02-07 10:14:14,484 - captureLoop - Getting Status 2023-02-07 10:14:14,485 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:14:14,514 - captureLoop - Time - Camera1: capturing frame 52 at layer 20 after 20 seconds 2023-02-07 10:14:16,220 - captureLoop - Command Success : ffmpeg -threads 1 -loglevel quiet -y -i http://cam.local:8081 -vframes 1 -threads 1 /home/pi/ftp/files/DuetLapse/octopi/192-168-1-8/598_1_printer_square_calibration/Camera1_00000052.jpeg 2023-02-07 10:14:16,220 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 10:14:16,221 - captureLoop - Getting Status 2023-02-07 10:14:16,221 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:14:18,962 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:14:18,963 - gcodeLoop - Getting Status 2023-02-07 10:14:18,967 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:14:24,010 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:14:24,010 - gcodeLoop - Getting Status 2023-02-07 10:14:24,014 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:14:26,261 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 10:14:26,262 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 10:14:26,293 - captureLoop - elapsed: 10.072699308395386 2023-02-07 10:14:26,294 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 10:14:26,295 - captureLoop - Getting Status 2023-02-07 10:14:26,296 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:14:29,045 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:14:29,046 - gcodeLoop - Getting Status 2023-02-07 10:14:29,047 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:14:34,084 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:14:34,085 - gcodeLoop - Getting Status 2023-02-07 10:14:34,085 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:14:36,342 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 10:14:36,343 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 10:14:36,374 - captureLoop - elapsed: 20.153383255004883 2023-02-07 10:14:36,375 - captureLoop - Calling function Status from Check for Pause with rr_model 2023-02-07 10:14:36,375 - captureLoop - Getting Status 2023-02-07 10:14:36,376 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:14:36,407 - captureLoop - Time - Camera1: capturing frame 53 at layer 20 after 20 seconds 2023-02-07 10:14:38,043 - captureLoop - Command Success : ffmpeg -threads 1 -loglevel quiet -y -i http://cam.local:8081 -vframes 1 -threads 1 /home/pi/ftp/files/DuetLapse/octopi/192-168-1-8/598_1_printer_square_calibration/Camera1_00000053.jpeg 2023-02-07 10:14:38,044 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 10:14:38,045 - captureLoop - Getting Status 2023-02-07 10:14:38,045 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:14:39,134 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:14:39,134 - gcodeLoop - Getting Status 2023-02-07 10:14:39,137 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:14:44,175 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:14:44,176 - gcodeLoop - Getting Status 2023-02-07 10:14:44,176 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:14:48,080 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 10:14:48,081 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 10:14:48,168 - captureLoop - elapsed: 10.124259948730469 2023-02-07 10:14:48,169 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 10:14:48,169 - captureLoop - Getting Status 2023-02-07 10:14:48,170 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:14:49,207 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:14:49,208 - gcodeLoop - Getting Status 2023-02-07 10:14:49,210 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:14:54,299 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:14:54,300 - gcodeLoop - Getting Status 2023-02-07 10:14:54,300 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:14:58,246 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 10:14:58,247 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 10:14:58,281 - captureLoop - elapsed: 20.236929893493652 2023-02-07 10:14:58,282 - captureLoop - Calling function Status from Check for Pause with rr_model 2023-02-07 10:14:58,282 - captureLoop - Getting Status 2023-02-07 10:14:58,283 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:14:58,312 - captureLoop - Time - Camera1: capturing frame 54 at layer 20 after 20 seconds 2023-02-07 10:14:59,333 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:14:59,334 - gcodeLoop - Getting Status 2023-02-07 10:14:59,337 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:15:00,061 - captureLoop - Command Success : ffmpeg -threads 1 -loglevel quiet -y -i http://cam.local:8081 -vframes 1 -threads 1 /home/pi/ftp/files/DuetLapse/octopi/192-168-1-8/598_1_printer_square_calibration/Camera1_00000054.jpeg 2023-02-07 10:15:00,061 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 10:15:00,062 - captureLoop - Getting Status 2023-02-07 10:15:00,062 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:15:04,379 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:15:04,380 - gcodeLoop - Getting Status 2023-02-07 10:15:04,380 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:15:09,413 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:15:09,414 - gcodeLoop - Getting Status 2023-02-07 10:15:09,414 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:15:10,095 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 10:15:10,096 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 10:15:10,124 - captureLoop - elapsed: 10.062339067459106 2023-02-07 10:15:10,125 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 10:15:10,125 - captureLoop - Getting Status 2023-02-07 10:15:10,126 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:15:14,460 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:15:14,461 - gcodeLoop - Getting Status 2023-02-07 10:15:14,464 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:15:19,583 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:15:19,584 - gcodeLoop - Getting Status 2023-02-07 10:15:19,588 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:15:20,164 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 10:15:20,165 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 10:15:20,216 - captureLoop - elapsed: 20.155019998550415 2023-02-07 10:15:20,218 - captureLoop - Calling function Status from Check for Pause with rr_model 2023-02-07 10:15:20,219 - captureLoop - Getting Status 2023-02-07 10:15:20,219 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:15:20,250 - captureLoop - Time - Camera1: capturing frame 55 at layer 21 after 20 seconds 2023-02-07 10:15:22,248 - captureLoop - Command Success : ffmpeg -threads 1 -loglevel quiet -y -i http://cam.local:8081 -vframes 1 -threads 1 /home/pi/ftp/files/DuetLapse/octopi/192-168-1-8/598_1_printer_square_calibration/Camera1_00000055.jpeg 2023-02-07 10:15:22,249 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 10:15:22,249 - captureLoop - Getting Status 2023-02-07 10:15:22,250 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:15:24,699 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:15:24,699 - gcodeLoop - Getting Status 2023-02-07 10:15:24,703 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:15:29,732 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:15:29,733 - gcodeLoop - Getting Status 2023-02-07 10:15:29,735 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:15:32,288 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 10:15:32,289 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 10:15:32,319 - captureLoop - elapsed: 10.070337295532227 2023-02-07 10:15:32,320 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 10:15:32,320 - captureLoop - Getting Status 2023-02-07 10:15:32,321 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:15:34,766 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:15:34,767 - gcodeLoop - Getting Status 2023-02-07 10:15:34,770 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:15:39,863 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:15:39,863 - gcodeLoop - Getting Status 2023-02-07 10:15:39,867 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:15:42,358 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 10:15:42,359 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 10:15:42,383 - captureLoop - elapsed: 20.133729934692383 2023-02-07 10:15:42,383 - captureLoop - Calling function Status from Check for Pause with rr_model 2023-02-07 10:15:42,384 - captureLoop - Getting Status 2023-02-07 10:15:42,384 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:15:42,410 - captureLoop - Time - Camera1: capturing frame 56 at layer 21 after 20 seconds 2023-02-07 10:15:44,040 - captureLoop - Command Success : ffmpeg -threads 1 -loglevel quiet -y -i http://cam.local:8081 -vframes 1 -threads 1 /home/pi/ftp/files/DuetLapse/octopi/192-168-1-8/598_1_printer_square_calibration/Camera1_00000056.jpeg 2023-02-07 10:15:44,040 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 10:15:44,041 - captureLoop - Getting Status 2023-02-07 10:15:44,041 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:15:44,906 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:15:44,907 - gcodeLoop - Getting Status 2023-02-07 10:15:44,911 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:15:49,961 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:15:49,962 - gcodeLoop - Getting Status 2023-02-07 10:15:49,965 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:15:54,087 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 10:15:54,088 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 10:15:54,210 - captureLoop - elapsed: 10.169463396072388 2023-02-07 10:15:54,211 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 10:15:54,211 - captureLoop - Getting Status 2023-02-07 10:15:54,212 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:15:54,998 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:15:54,999 - gcodeLoop - Getting Status 2023-02-07 10:15:55,003 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:16:00,144 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:16:00,145 - gcodeLoop - Getting Status 2023-02-07 10:16:00,147 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:16:04,258 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 10:16:04,259 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 10:16:04,340 - captureLoop - elapsed: 20.29943346977234 2023-02-07 10:16:04,340 - captureLoop - Calling function Status from Check for Pause with rr_model 2023-02-07 10:16:04,341 - captureLoop - Getting Status 2023-02-07 10:16:04,341 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:16:04,367 - captureLoop - Time - Camera1: capturing frame 57 at layer 22 after 20 seconds 2023-02-07 10:16:05,287 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:16:05,288 - gcodeLoop - Getting Status 2023-02-07 10:16:05,291 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:16:06,022 - captureLoop - Command Success : ffmpeg -threads 1 -loglevel quiet -y -i http://cam.local:8081 -vframes 1 -threads 1 /home/pi/ftp/files/DuetLapse/octopi/192-168-1-8/598_1_printer_square_calibration/Camera1_00000057.jpeg 2023-02-07 10:16:06,023 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 10:16:06,023 - captureLoop - Getting Status 2023-02-07 10:16:06,024 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:16:10,335 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:16:10,336 - gcodeLoop - Getting Status 2023-02-07 10:16:10,336 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:16:15,375 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:16:15,376 - gcodeLoop - Getting Status 2023-02-07 10:16:15,379 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:16:16,056 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 10:16:16,056 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 10:16:16,080 - captureLoop - elapsed: 10.056796550750732 2023-02-07 10:16:16,080 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 10:16:16,081 - captureLoop - Getting Status 2023-02-07 10:16:16,081 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:16:20,423 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:16:20,424 - gcodeLoop - Getting Status 2023-02-07 10:16:20,427 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:16:25,484 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:16:25,485 - gcodeLoop - Getting Status 2023-02-07 10:16:25,488 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:16:26,117 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 10:16:26,118 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 10:16:26,254 - captureLoop - elapsed: 20.23099184036255 2023-02-07 10:16:26,255 - captureLoop - Calling function Status from Check for Pause with rr_model 2023-02-07 10:16:26,255 - captureLoop - Getting Status 2023-02-07 10:16:26,257 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:16:26,289 - captureLoop - Time - Camera1: capturing frame 58 at layer 22 after 20 seconds 2023-02-07 10:16:28,035 - captureLoop - Command Success : ffmpeg -threads 1 -loglevel quiet -y -i http://cam.local:8081 -vframes 1 -threads 1 /home/pi/ftp/files/DuetLapse/octopi/192-168-1-8/598_1_printer_square_calibration/Camera1_00000058.jpeg 2023-02-07 10:16:28,036 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 10:16:28,036 - captureLoop - Getting Status 2023-02-07 10:16:28,037 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:16:30,546 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:16:30,547 - gcodeLoop - Getting Status 2023-02-07 10:16:30,551 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:16:35,589 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:16:35,590 - gcodeLoop - Getting Status 2023-02-07 10:16:35,593 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:16:38,076 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 10:16:38,077 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 10:16:38,106 - captureLoop - elapsed: 10.070281505584717 2023-02-07 10:16:38,107 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 10:16:38,108 - captureLoop - Getting Status 2023-02-07 10:16:38,108 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:16:40,629 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:16:40,630 - gcodeLoop - Getting Status 2023-02-07 10:16:40,633 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:16:45,666 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:16:45,666 - gcodeLoop - Getting Status 2023-02-07 10:16:45,667 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:16:48,152 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 10:16:48,152 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 10:16:48,190 - captureLoop - elapsed: 20.154550790786743 2023-02-07 10:16:48,191 - captureLoop - Calling function Status from Check for Pause with rr_model 2023-02-07 10:16:48,191 - captureLoop - Getting Status 2023-02-07 10:16:48,192 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:16:48,220 - captureLoop - Time - Camera1: capturing frame 59 at layer 22 after 20 seconds 2023-02-07 10:16:49,903 - captureLoop - Command Success : ffmpeg -threads 1 -loglevel quiet -y -i http://cam.local:8081 -vframes 1 -threads 1 /home/pi/ftp/files/DuetLapse/octopi/192-168-1-8/598_1_printer_square_calibration/Camera1_00000059.jpeg 2023-02-07 10:16:49,903 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 10:16:49,904 - captureLoop - Getting Status 2023-02-07 10:16:49,904 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:16:50,716 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:16:50,717 - gcodeLoop - Getting Status 2023-02-07 10:16:50,721 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:16:55,752 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:16:55,752 - gcodeLoop - Getting Status 2023-02-07 10:16:55,753 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:16:59,990 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 10:16:59,991 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 10:17:00,011 - captureLoop - elapsed: 10.10759425163269 2023-02-07 10:17:00,011 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 10:17:00,012 - captureLoop - Getting Status 2023-02-07 10:17:00,012 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:17:00,783 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:17:00,784 - gcodeLoop - Getting Status 2023-02-07 10:17:00,789 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:17:05,837 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:17:05,838 - gcodeLoop - Getting Status 2023-02-07 10:17:05,843 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:17:10,047 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 10:17:10,048 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 10:17:10,070 - captureLoop - elapsed: 20.166277170181274 2023-02-07 10:17:10,070 - captureLoop - Calling function Status from Check for Pause with rr_model 2023-02-07 10:17:10,070 - captureLoop - Getting Status 2023-02-07 10:17:10,071 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:17:10,100 - captureLoop - Time - Camera1: capturing frame 60 at layer 23 after 20 seconds 2023-02-07 10:17:10,886 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:17:10,887 - gcodeLoop - Getting Status 2023-02-07 10:17:10,889 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:17:11,783 - captureLoop - Command Success : ffmpeg -threads 1 -loglevel quiet -y -i http://cam.local:8081 -vframes 1 -threads 1 /home/pi/ftp/files/DuetLapse/octopi/192-168-1-8/598_1_printer_square_calibration/Camera1_00000060.jpeg 2023-02-07 10:17:11,786 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 10:17:11,786 - captureLoop - Getting Status 2023-02-07 10:17:11,787 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:17:15,922 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:17:15,923 - gcodeLoop - Getting Status 2023-02-07 10:17:15,924 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:17:21,038 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:17:21,039 - gcodeLoop - Getting Status 2023-02-07 10:17:21,042 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:17:21,821 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 10:17:21,821 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 10:17:21,855 - captureLoop - elapsed: 10.068805932998657 2023-02-07 10:17:21,855 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 10:17:21,856 - captureLoop - Getting Status 2023-02-07 10:17:21,856 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:17:26,072 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:17:26,073 - gcodeLoop - Getting Status 2023-02-07 10:17:26,077 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:17:31,125 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:17:31,125 - gcodeLoop - Getting Status 2023-02-07 10:17:31,126 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:17:31,893 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 10:17:31,893 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 10:17:31,913 - captureLoop - elapsed: 20.126734018325806 2023-02-07 10:17:31,913 - captureLoop - Calling function Status from Check for Pause with rr_model 2023-02-07 10:17:31,914 - captureLoop - Getting Status 2023-02-07 10:17:31,914 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:17:31,939 - captureLoop - Time - Camera1: capturing frame 61 at layer 23 after 20 seconds 2023-02-07 10:17:33,580 - captureLoop - Command Success : ffmpeg -threads 1 -loglevel quiet -y -i http://cam.local:8081 -vframes 1 -threads 1 /home/pi/ftp/files/DuetLapse/octopi/192-168-1-8/598_1_printer_square_calibration/Camera1_00000061.jpeg 2023-02-07 10:17:33,581 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 10:17:33,581 - captureLoop - Getting Status 2023-02-07 10:17:33,581 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:17:36,156 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:17:36,157 - gcodeLoop - Getting Status 2023-02-07 10:17:36,161 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:17:41,314 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:17:41,314 - gcodeLoop - Getting Status 2023-02-07 10:17:41,318 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:17:43,629 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 10:17:43,630 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 10:17:43,662 - captureLoop - elapsed: 10.081128120422363 2023-02-07 10:17:43,663 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 10:17:43,663 - captureLoop - Getting Status 2023-02-07 10:17:43,664 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:17:46,360 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:17:46,361 - gcodeLoop - Getting Status 2023-02-07 10:17:46,364 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:17:51,403 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:17:51,404 - gcodeLoop - Getting Status 2023-02-07 10:17:51,407 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:17:53,707 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 10:17:53,707 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 10:17:53,804 - captureLoop - elapsed: 20.223592519760132 2023-02-07 10:17:53,805 - captureLoop - Calling function Status from Check for Pause with rr_model 2023-02-07 10:17:53,806 - captureLoop - Getting Status 2023-02-07 10:17:53,806 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:17:53,833 - captureLoop - Time - Camera1: capturing frame 62 at layer 24 after 20 seconds 2023-02-07 10:17:55,481 - captureLoop - Command Success : ffmpeg -threads 1 -loglevel quiet -y -i http://cam.local:8081 -vframes 1 -threads 1 /home/pi/ftp/files/DuetLapse/octopi/192-168-1-8/598_1_printer_square_calibration/Camera1_00000062.jpeg 2023-02-07 10:17:55,482 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 10:17:55,482 - captureLoop - Getting Status 2023-02-07 10:17:55,483 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:17:56,457 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:17:56,458 - gcodeLoop - Getting Status 2023-02-07 10:17:56,459 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:18:01,505 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:18:01,506 - gcodeLoop - Getting Status 2023-02-07 10:18:01,507 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:18:05,566 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 10:18:05,566 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 10:18:05,586 - captureLoop - elapsed: 10.104286909103394 2023-02-07 10:18:05,587 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 10:18:05,587 - captureLoop - Getting Status 2023-02-07 10:18:05,587 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:18:06,601 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:18:06,602 - gcodeLoop - Getting Status 2023-02-07 10:18:06,606 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:18:11,648 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:18:11,649 - gcodeLoop - Getting Status 2023-02-07 10:18:11,649 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:18:15,632 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 10:18:15,633 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 10:18:15,662 - captureLoop - elapsed: 20.180264472961426 2023-02-07 10:18:15,663 - captureLoop - Calling function Status from Check for Pause with rr_model 2023-02-07 10:18:15,664 - captureLoop - Getting Status 2023-02-07 10:18:15,665 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:18:15,692 - captureLoop - Time - Camera1: capturing frame 63 at layer 24 after 20 seconds 2023-02-07 10:18:16,679 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:18:16,680 - gcodeLoop - Getting Status 2023-02-07 10:18:16,682 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:18:17,371 - captureLoop - Command Success : ffmpeg -threads 1 -loglevel quiet -y -i http://cam.local:8081 -vframes 1 -threads 1 /home/pi/ftp/files/DuetLapse/octopi/192-168-1-8/598_1_printer_square_calibration/Camera1_00000063.jpeg 2023-02-07 10:18:17,373 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 10:18:17,373 - captureLoop - Getting Status 2023-02-07 10:18:17,374 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:18:21,714 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:18:21,715 - gcodeLoop - Getting Status 2023-02-07 10:18:21,715 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:18:26,771 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:18:26,772 - gcodeLoop - Getting Status 2023-02-07 10:18:26,784 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:18:27,428 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 10:18:27,429 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 10:18:27,457 - captureLoop - elapsed: 10.08442497253418 2023-02-07 10:18:27,458 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 10:18:27,459 - captureLoop - Getting Status 2023-02-07 10:18:27,460 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:18:31,826 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:18:31,826 - gcodeLoop - Getting Status 2023-02-07 10:18:31,828 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:18:36,858 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:18:36,859 - gcodeLoop - Getting Status 2023-02-07 10:18:36,862 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:18:37,500 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 10:18:37,501 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 10:18:37,534 - captureLoop - elapsed: 20.161293745040894 2023-02-07 10:18:37,536 - captureLoop - Calling function Status from Check for Pause with rr_model 2023-02-07 10:18:37,537 - captureLoop - Getting Status 2023-02-07 10:18:37,538 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:18:37,568 - captureLoop - Time - Camera1: capturing frame 64 at layer 24 after 20 seconds 2023-02-07 10:18:39,321 - captureLoop - Command Success : ffmpeg -threads 1 -loglevel quiet -y -i http://cam.local:8081 -vframes 1 -threads 1 /home/pi/ftp/files/DuetLapse/octopi/192-168-1-8/598_1_printer_square_calibration/Camera1_00000064.jpeg 2023-02-07 10:18:39,322 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 10:18:39,322 - captureLoop - Getting Status 2023-02-07 10:18:39,323 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:18:41,934 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:18:41,935 - gcodeLoop - Getting Status 2023-02-07 10:18:41,939 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:18:46,985 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:18:46,986 - gcodeLoop - Getting Status 2023-02-07 10:18:46,988 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:18:49,394 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 10:18:49,395 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 10:18:49,516 - captureLoop - elapsed: 10.193962574005127 2023-02-07 10:18:49,517 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 10:18:49,517 - captureLoop - Getting Status 2023-02-07 10:18:49,518 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:18:52,028 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:18:52,028 - gcodeLoop - Getting Status 2023-02-07 10:18:52,031 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:18:57,079 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:18:57,079 - gcodeLoop - Getting Status 2023-02-07 10:18:57,080 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:18:59,563 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 10:18:59,564 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 10:18:59,658 - captureLoop - elapsed: 20.335613489151 2023-02-07 10:18:59,659 - captureLoop - Calling function Status from Check for Pause with rr_model 2023-02-07 10:18:59,659 - captureLoop - Getting Status 2023-02-07 10:18:59,660 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:18:59,687 - captureLoop - Time - Camera1: capturing frame 65 at layer 25 after 20 seconds 2023-02-07 10:19:01,314 - captureLoop - Command Success : ffmpeg -threads 1 -loglevel quiet -y -i http://cam.local:8081 -vframes 1 -threads 1 /home/pi/ftp/files/DuetLapse/octopi/192-168-1-8/598_1_printer_square_calibration/Camera1_00000065.jpeg 2023-02-07 10:19:01,315 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 10:19:01,316 - captureLoop - Getting Status 2023-02-07 10:19:01,316 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:19:02,216 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:19:02,217 - gcodeLoop - Getting Status 2023-02-07 10:19:02,218 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:19:07,328 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:19:07,329 - gcodeLoop - Getting Status 2023-02-07 10:19:07,330 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:19:11,409 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 10:19:11,410 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 10:19:11,439 - captureLoop - elapsed: 10.12410020828247 2023-02-07 10:19:11,440 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 10:19:11,441 - captureLoop - Getting Status 2023-02-07 10:19:11,442 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:19:12,375 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:19:12,375 - gcodeLoop - Getting Status 2023-02-07 10:19:12,376 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:19:17,416 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:19:17,417 - gcodeLoop - Getting Status 2023-02-07 10:19:17,421 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:19:21,475 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 10:19:21,476 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 10:19:21,564 - captureLoop - elapsed: 20.248767852783203 2023-02-07 10:19:21,565 - captureLoop - Calling function Status from Check for Pause with rr_model 2023-02-07 10:19:21,565 - captureLoop - Getting Status 2023-02-07 10:19:21,566 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:19:21,602 - captureLoop - Time - Camera1: capturing frame 66 at layer 25 after 20 seconds 2023-02-07 10:19:22,465 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:19:22,468 - gcodeLoop - Getting Status 2023-02-07 10:19:22,469 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:19:23,297 - captureLoop - Command Success : ffmpeg -threads 1 -loglevel quiet -y -i http://cam.local:8081 -vframes 1 -threads 1 /home/pi/ftp/files/DuetLapse/octopi/192-168-1-8/598_1_printer_square_calibration/Camera1_00000066.jpeg 2023-02-07 10:19:23,297 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 10:19:23,298 - captureLoop - Getting Status 2023-02-07 10:19:23,298 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:19:27,499 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:19:27,500 - gcodeLoop - Getting Status 2023-02-07 10:19:27,504 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:19:32,536 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:19:32,537 - gcodeLoop - Getting Status 2023-02-07 10:19:32,541 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:19:33,417 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 10:19:33,418 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 10:19:33,545 - captureLoop - elapsed: 10.247680425643921 2023-02-07 10:19:33,546 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 10:19:33,546 - captureLoop - Getting Status 2023-02-07 10:19:33,547 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:19:37,585 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:19:37,585 - gcodeLoop - Getting Status 2023-02-07 10:19:37,588 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:19:42,624 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:19:42,624 - gcodeLoop - Getting Status 2023-02-07 10:19:42,625 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:19:43,616 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 10:19:43,617 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 10:19:43,638 - captureLoop - elapsed: 20.340352535247803 2023-02-07 10:19:43,638 - captureLoop - Calling function Status from Check for Pause with rr_model 2023-02-07 10:19:43,639 - captureLoop - Getting Status 2023-02-07 10:19:43,640 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:19:43,663 - captureLoop - Time - Camera1: capturing frame 67 at layer 26 after 20 seconds 2023-02-07 10:19:45,358 - captureLoop - Command Success : ffmpeg -threads 1 -loglevel quiet -y -i http://cam.local:8081 -vframes 1 -threads 1 /home/pi/ftp/files/DuetLapse/octopi/192-168-1-8/598_1_printer_square_calibration/Camera1_00000067.jpeg 2023-02-07 10:19:45,358 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 10:19:45,359 - captureLoop - Getting Status 2023-02-07 10:19:45,359 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:19:47,666 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:19:47,667 - gcodeLoop - Getting Status 2023-02-07 10:19:47,668 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:19:52,700 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:19:52,701 - gcodeLoop - Getting Status 2023-02-07 10:19:52,702 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:19:55,431 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 10:19:55,432 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 10:19:55,463 - captureLoop - elapsed: 10.104122638702393 2023-02-07 10:19:55,464 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 10:19:55,465 - captureLoop - Getting Status 2023-02-07 10:19:55,465 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:19:57,743 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:19:57,744 - gcodeLoop - Getting Status 2023-02-07 10:19:57,746 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:20:02,775 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:20:02,776 - gcodeLoop - Getting Status 2023-02-07 10:20:02,779 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:20:05,506 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 10:20:05,507 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 10:20:05,537 - captureLoop - elapsed: 20.17858576774597 2023-02-07 10:20:05,538 - captureLoop - Calling function Status from Check for Pause with rr_model 2023-02-07 10:20:05,538 - captureLoop - Getting Status 2023-02-07 10:20:05,539 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:20:05,565 - captureLoop - Time - Camera1: capturing frame 68 at layer 26 after 20 seconds 2023-02-07 10:20:07,268 - captureLoop - Command Success : ffmpeg -threads 1 -loglevel quiet -y -i http://cam.local:8081 -vframes 1 -threads 1 /home/pi/ftp/files/DuetLapse/octopi/192-168-1-8/598_1_printer_square_calibration/Camera1_00000068.jpeg 2023-02-07 10:20:07,269 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 10:20:07,270 - captureLoop - Getting Status 2023-02-07 10:20:07,270 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:20:07,820 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:20:07,820 - gcodeLoop - Getting Status 2023-02-07 10:20:07,823 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:20:12,859 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:20:12,860 - gcodeLoop - Getting Status 2023-02-07 10:20:12,863 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:20:17,305 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 10:20:17,305 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 10:20:17,328 - captureLoop - elapsed: 10.059152841567993 2023-02-07 10:20:17,329 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 10:20:17,329 - captureLoop - Getting Status 2023-02-07 10:20:17,329 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:20:17,905 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:20:17,906 - gcodeLoop - Getting Status 2023-02-07 10:20:17,910 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:20:22,946 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:20:22,947 - gcodeLoop - Getting Status 2023-02-07 10:20:22,950 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:20:27,365 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 10:20:27,366 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 10:20:27,396 - captureLoop - elapsed: 20.127131462097168 2023-02-07 10:20:27,397 - captureLoop - Calling function Status from Check for Pause with rr_model 2023-02-07 10:20:27,398 - captureLoop - Getting Status 2023-02-07 10:20:27,399 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:20:27,427 - captureLoop - Time - Camera1: capturing frame 69 at layer 26 after 20 seconds 2023-02-07 10:20:27,985 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:20:27,988 - gcodeLoop - Getting Status 2023-02-07 10:20:27,989 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:20:29,034 - captureLoop - Command Success : ffmpeg -threads 1 -loglevel quiet -y -i http://cam.local:8081 -vframes 1 -threads 1 /home/pi/ftp/files/DuetLapse/octopi/192-168-1-8/598_1_printer_square_calibration/Camera1_00000069.jpeg 2023-02-07 10:20:29,035 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 10:20:29,035 - captureLoop - Getting Status 2023-02-07 10:20:29,035 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:20:33,028 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:20:33,029 - gcodeLoop - Getting Status 2023-02-07 10:20:33,033 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:20:38,068 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:20:38,069 - gcodeLoop - Getting Status 2023-02-07 10:20:38,072 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:20:39,069 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 10:20:39,070 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 10:20:39,096 - captureLoop - elapsed: 10.06146764755249 2023-02-07 10:20:39,097 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 10:20:39,098 - captureLoop - Getting Status 2023-02-07 10:20:39,098 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:20:43,173 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:20:43,174 - gcodeLoop - Getting Status 2023-02-07 10:20:43,177 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:20:48,217 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:20:48,218 - gcodeLoop - Getting Status 2023-02-07 10:20:48,221 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:20:49,134 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 10:20:49,135 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 10:20:49,172 - captureLoop - elapsed: 20.13729500770569 2023-02-07 10:20:49,173 - captureLoop - Calling function Status from Check for Pause with rr_model 2023-02-07 10:20:49,174 - captureLoop - Getting Status 2023-02-07 10:20:49,174 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:20:49,211 - captureLoop - Time - Camera1: capturing frame 70 at layer 27 after 20 seconds 2023-02-07 10:20:50,869 - captureLoop - Command Success : ffmpeg -threads 1 -loglevel quiet -y -i http://cam.local:8081 -vframes 1 -threads 1 /home/pi/ftp/files/DuetLapse/octopi/192-168-1-8/598_1_printer_square_calibration/Camera1_00000070.jpeg 2023-02-07 10:20:50,870 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 10:20:50,870 - captureLoop - Getting Status 2023-02-07 10:20:50,870 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:20:53,261 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:20:53,262 - gcodeLoop - Getting Status 2023-02-07 10:20:53,267 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:20:58,310 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:20:58,310 - gcodeLoop - Getting Status 2023-02-07 10:20:58,313 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:21:00,908 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 10:21:00,909 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 10:21:00,938 - captureLoop - elapsed: 10.067893505096436 2023-02-07 10:21:00,938 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 10:21:00,939 - captureLoop - Getting Status 2023-02-07 10:21:00,940 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:21:03,344 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:21:03,345 - gcodeLoop - Getting Status 2023-02-07 10:21:03,347 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:21:08,376 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:21:08,377 - gcodeLoop - Getting Status 2023-02-07 10:21:08,378 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:21:10,982 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 10:21:10,983 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 10:21:11,014 - captureLoop - elapsed: 20.14399766921997 2023-02-07 10:21:11,015 - captureLoop - Calling function Status from Check for Pause with rr_model 2023-02-07 10:21:11,015 - captureLoop - Getting Status 2023-02-07 10:21:11,016 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:21:11,057 - captureLoop - Time - Camera1: capturing frame 71 at layer 27 after 20 seconds 2023-02-07 10:21:12,822 - captureLoop - Command Success : ffmpeg -threads 1 -loglevel quiet -y -i http://cam.local:8081 -vframes 1 -threads 1 /home/pi/ftp/files/DuetLapse/octopi/192-168-1-8/598_1_printer_square_calibration/Camera1_00000071.jpeg 2023-02-07 10:21:12,823 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 10:21:12,824 - captureLoop - Getting Status 2023-02-07 10:21:12,824 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:21:13,420 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:21:13,424 - gcodeLoop - Getting Status 2023-02-07 10:21:13,424 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:21:18,456 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:21:18,456 - gcodeLoop - Getting Status 2023-02-07 10:21:18,459 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:21:22,854 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 10:21:22,855 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 10:21:22,885 - captureLoop - elapsed: 10.061763525009155 2023-02-07 10:21:22,886 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 10:21:22,887 - captureLoop - Getting Status 2023-02-07 10:21:22,887 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:21:23,501 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:21:23,502 - gcodeLoop - Getting Status 2023-02-07 10:21:23,505 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:21:28,540 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:21:28,541 - gcodeLoop - Getting Status 2023-02-07 10:21:28,546 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:21:32,926 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 10:21:32,926 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 10:21:32,984 - captureLoop - elapsed: 20.16068148612976 2023-02-07 10:21:32,984 - captureLoop - Calling function Status from Check for Pause with rr_model 2023-02-07 10:21:32,985 - captureLoop - Getting Status 2023-02-07 10:21:32,985 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:21:33,008 - captureLoop - Time - Camera1: capturing frame 72 at layer 28 after 20 seconds 2023-02-07 10:21:33,586 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:21:33,587 - gcodeLoop - Getting Status 2023-02-07 10:21:33,587 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:21:34,735 - captureLoop - Command Success : ffmpeg -threads 1 -loglevel quiet -y -i http://cam.local:8081 -vframes 1 -threads 1 /home/pi/ftp/files/DuetLapse/octopi/192-168-1-8/598_1_printer_square_calibration/Camera1_00000072.jpeg 2023-02-07 10:21:34,736 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 10:21:34,736 - captureLoop - Getting Status 2023-02-07 10:21:34,737 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:21:38,619 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:21:38,619 - gcodeLoop - Getting Status 2023-02-07 10:21:38,623 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:21:43,654 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:21:43,655 - gcodeLoop - Getting Status 2023-02-07 10:21:43,655 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:21:44,775 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 10:21:44,776 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 10:21:44,802 - captureLoop - elapsed: 10.065931797027588 2023-02-07 10:21:44,802 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 10:21:44,803 - captureLoop - Getting Status 2023-02-07 10:21:44,803 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:21:48,688 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:21:48,689 - gcodeLoop - Getting Status 2023-02-07 10:21:48,691 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:21:53,728 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:21:53,729 - gcodeLoop - Getting Status 2023-02-07 10:21:53,732 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:21:54,836 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 10:21:54,837 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 10:21:54,863 - captureLoop - elapsed: 20.12708306312561 2023-02-07 10:21:54,863 - captureLoop - Calling function Status from Check for Pause with rr_model 2023-02-07 10:21:54,864 - captureLoop - Getting Status 2023-02-07 10:21:54,865 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:21:54,899 - captureLoop - Time - Camera1: capturing frame 73 at layer 28 after 20 seconds 2023-02-07 10:21:56,575 - captureLoop - Command Success : ffmpeg -threads 1 -loglevel quiet -y -i http://cam.local:8081 -vframes 1 -threads 1 /home/pi/ftp/files/DuetLapse/octopi/192-168-1-8/598_1_printer_square_calibration/Camera1_00000073.jpeg 2023-02-07 10:21:56,575 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 10:21:56,576 - captureLoop - Getting Status 2023-02-07 10:21:56,576 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:21:58,758 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:21:58,759 - gcodeLoop - Getting Status 2023-02-07 10:21:58,763 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:22:03,800 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:22:03,801 - gcodeLoop - Getting Status 2023-02-07 10:22:03,805 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:22:06,609 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 10:22:06,609 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 10:22:06,632 - captureLoop - elapsed: 10.056268453598022 2023-02-07 10:22:06,632 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 10:22:06,633 - captureLoop - Getting Status 2023-02-07 10:22:06,633 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:22:08,835 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:22:08,836 - gcodeLoop - Getting Status 2023-02-07 10:22:08,839 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:22:13,881 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:22:13,881 - gcodeLoop - Getting Status 2023-02-07 10:22:13,884 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:22:16,659 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 10:22:16,660 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 10:22:16,689 - captureLoop - elapsed: 20.1140718460083 2023-02-07 10:22:16,690 - captureLoop - Calling function Status from Check for Pause with rr_model 2023-02-07 10:22:16,691 - captureLoop - Getting Status 2023-02-07 10:22:16,691 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:22:16,724 - captureLoop - Time - Camera1: capturing frame 74 at layer 28 after 20 seconds 2023-02-07 10:22:18,369 - captureLoop - Command Success : ffmpeg -threads 1 -loglevel quiet -y -i http://cam.local:8081 -vframes 1 -threads 1 /home/pi/ftp/files/DuetLapse/octopi/192-168-1-8/598_1_printer_square_calibration/Camera1_00000074.jpeg 2023-02-07 10:22:18,369 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 10:22:18,370 - captureLoop - Getting Status 2023-02-07 10:22:18,370 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:22:18,915 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:22:18,923 - gcodeLoop - Getting Status 2023-02-07 10:22:18,924 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:22:23,957 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:22:23,958 - gcodeLoop - Getting Status 2023-02-07 10:22:23,962 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:22:28,407 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 10:22:28,408 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 10:22:28,441 - captureLoop - elapsed: 10.07188868522644 2023-02-07 10:22:28,442 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 10:22:28,443 - captureLoop - Getting Status 2023-02-07 10:22:28,443 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:22:28,996 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:22:28,997 - gcodeLoop - Getting Status 2023-02-07 10:22:29,000 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:22:34,038 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:22:34,039 - gcodeLoop - Getting Status 2023-02-07 10:22:34,042 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:22:38,485 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 10:22:38,486 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 10:22:38,536 - captureLoop - elapsed: 20.166488647460938 2023-02-07 10:22:38,537 - captureLoop - Calling function Status from Check for Pause with rr_model 2023-02-07 10:22:38,537 - captureLoop - Getting Status 2023-02-07 10:22:38,538 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:22:38,568 - captureLoop - Time - Camera1: capturing frame 75 at layer 29 after 20 seconds 2023-02-07 10:22:39,084 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:22:39,085 - gcodeLoop - Getting Status 2023-02-07 10:22:39,088 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:22:40,236 - captureLoop - Command Success : ffmpeg -threads 1 -loglevel quiet -y -i http://cam.local:8081 -vframes 1 -threads 1 /home/pi/ftp/files/DuetLapse/octopi/192-168-1-8/598_1_printer_square_calibration/Camera1_00000075.jpeg 2023-02-07 10:22:40,237 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 10:22:40,237 - captureLoop - Getting Status 2023-02-07 10:22:40,237 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:22:44,117 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:22:44,117 - gcodeLoop - Getting Status 2023-02-07 10:22:44,124 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:22:49,156 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:22:49,157 - gcodeLoop - Getting Status 2023-02-07 10:22:49,160 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:22:50,270 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 10:22:50,271 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 10:22:50,289 - captureLoop - elapsed: 10.052388429641724 2023-02-07 10:22:50,290 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 10:22:50,290 - captureLoop - Getting Status 2023-02-07 10:22:50,290 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:22:54,197 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:22:54,198 - gcodeLoop - Getting Status 2023-02-07 10:22:54,201 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:23:00,316 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 10:23:00,317 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 10:23:00,340 - captureLoop - elapsed: 20.103397846221924 2023-02-07 10:23:00,341 - captureLoop - Calling function Status from Check for Pause with rr_model 2023-02-07 10:23:00,341 - captureLoop - Getting Status 2023-02-07 10:23:00,341 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:23:00,388 - captureLoop - Time - Camera1: capturing frame 76 at layer 29 after 20 seconds 2023-02-07 10:23:01,396 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:23:01,397 - gcodeLoop - Getting Status 2023-02-07 10:23:01,397 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:23:02,158 - captureLoop - Command Success : ffmpeg -threads 1 -loglevel quiet -y -i http://cam.local:8081 -vframes 1 -threads 1 /home/pi/ftp/files/DuetLapse/octopi/192-168-1-8/598_1_printer_square_calibration/Camera1_00000076.jpeg 2023-02-07 10:23:02,159 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 10:23:02,159 - captureLoop - Getting Status 2023-02-07 10:23:02,159 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:23:06,462 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:23:06,463 - gcodeLoop - Getting Status 2023-02-07 10:23:06,464 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:23:11,514 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:23:11,515 - gcodeLoop - Getting Status 2023-02-07 10:23:11,516 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:23:12,201 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 10:23:12,202 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 10:23:12,244 - captureLoop - elapsed: 10.085251331329346 2023-02-07 10:23:12,245 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 10:23:12,246 - captureLoop - Getting Status 2023-02-07 10:23:12,246 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:23:16,551 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:23:16,552 - gcodeLoop - Getting Status 2023-02-07 10:23:16,555 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:23:21,686 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:23:21,686 - gcodeLoop - Getting Status 2023-02-07 10:23:21,687 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:23:22,310 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 10:23:22,311 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 10:23:22,338 - captureLoop - elapsed: 20.17901849746704 2023-02-07 10:23:22,338 - captureLoop - Calling function Status from Check for Pause with rr_model 2023-02-07 10:23:22,339 - captureLoop - Getting Status 2023-02-07 10:23:22,339 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:23:22,365 - captureLoop - Time - Camera1: capturing frame 77 at layer 30 after 20 seconds 2023-02-07 10:23:24,078 - captureLoop - Command Success : ffmpeg -threads 1 -loglevel quiet -y -i http://cam.local:8081 -vframes 1 -threads 1 /home/pi/ftp/files/DuetLapse/octopi/192-168-1-8/598_1_printer_square_calibration/Camera1_00000077.jpeg 2023-02-07 10:23:24,079 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 10:23:24,080 - captureLoop - Getting Status 2023-02-07 10:23:24,080 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:23:26,716 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:23:26,717 - gcodeLoop - Getting Status 2023-02-07 10:23:26,718 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:23:31,764 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:23:31,764 - gcodeLoop - Getting Status 2023-02-07 10:23:31,765 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:23:34,118 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 10:23:34,119 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 10:23:34,139 - captureLoop - elapsed: 10.060174942016602 2023-02-07 10:23:34,140 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 10:23:34,140 - captureLoop - Getting Status 2023-02-07 10:23:34,140 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:23:36,795 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:23:36,796 - gcodeLoop - Getting Status 2023-02-07 10:23:36,799 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:23:41,837 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:23:41,837 - gcodeLoop - Getting Status 2023-02-07 10:23:41,840 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:23:44,166 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 10:23:44,167 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 10:23:44,190 - captureLoop - elapsed: 20.111109495162964 2023-02-07 10:23:44,191 - captureLoop - Calling function Status from Check for Pause with rr_model 2023-02-07 10:23:44,191 - captureLoop - Getting Status 2023-02-07 10:23:44,192 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:23:44,220 - captureLoop - Time - Camera1: capturing frame 78 at layer 30 after 20 seconds 2023-02-07 10:23:45,889 - captureLoop - Command Success : ffmpeg -threads 1 -loglevel quiet -y -i http://cam.local:8081 -vframes 1 -threads 1 /home/pi/ftp/files/DuetLapse/octopi/192-168-1-8/598_1_printer_square_calibration/Camera1_00000078.jpeg 2023-02-07 10:23:45,890 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 10:23:45,890 - captureLoop - Getting Status 2023-02-07 10:23:45,891 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:23:46,872 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:23:46,873 - gcodeLoop - Getting Status 2023-02-07 10:23:46,877 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:23:51,913 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:23:51,914 - gcodeLoop - Getting Status 2023-02-07 10:23:51,917 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:23:55,929 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 10:23:55,929 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 10:23:55,996 - captureLoop - elapsed: 10.10569977760315 2023-02-07 10:23:55,996 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 10:23:55,997 - captureLoop - Getting Status 2023-02-07 10:23:55,997 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:23:56,956 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:23:56,956 - gcodeLoop - Getting Status 2023-02-07 10:23:56,959 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:24:01,997 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:24:01,998 - gcodeLoop - Getting Status 2023-02-07 10:24:02,002 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:24:06,041 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 10:24:06,042 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 10:24:06,073 - captureLoop - elapsed: 20.183520317077637 2023-02-07 10:24:06,074 - captureLoop - Calling function Status from Check for Pause with rr_model 2023-02-07 10:24:06,075 - captureLoop - Getting Status 2023-02-07 10:24:06,075 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:24:06,106 - captureLoop - Time - Camera1: capturing frame 79 at layer 30 after 20 seconds 2023-02-07 10:24:07,036 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:24:07,041 - gcodeLoop - Getting Status 2023-02-07 10:24:07,042 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:24:07,758 - captureLoop - Command Success : ffmpeg -threads 1 -loglevel quiet -y -i http://cam.local:8081 -vframes 1 -threads 1 /home/pi/ftp/files/DuetLapse/octopi/192-168-1-8/598_1_printer_square_calibration/Camera1_00000079.jpeg 2023-02-07 10:24:07,758 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 10:24:07,759 - captureLoop - Getting Status 2023-02-07 10:24:07,759 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:24:12,095 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:24:12,096 - gcodeLoop - Getting Status 2023-02-07 10:24:12,100 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:24:17,142 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:24:17,143 - gcodeLoop - Getting Status 2023-02-07 10:24:17,148 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:24:17,823 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 10:24:17,823 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 10:24:17,842 - captureLoop - elapsed: 10.084104537963867 2023-02-07 10:24:17,843 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 10:24:17,843 - captureLoop - Getting Status 2023-02-07 10:24:17,843 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:24:22,190 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:24:22,191 - gcodeLoop - Getting Status 2023-02-07 10:24:22,191 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:24:27,354 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:24:27,356 - gcodeLoop - Getting Status 2023-02-07 10:24:27,358 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:24:27,879 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 10:24:27,880 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 10:24:27,906 - captureLoop - elapsed: 20.147964477539062 2023-02-07 10:24:27,907 - captureLoop - Calling function Status from Check for Pause with rr_model 2023-02-07 10:24:27,907 - captureLoop - Getting Status 2023-02-07 10:24:27,907 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:24:27,935 - captureLoop - Time - Camera1: capturing frame 80 at layer 31 after 20 seconds 2023-02-07 10:24:29,603 - captureLoop - Command Success : ffmpeg -threads 1 -loglevel quiet -y -i http://cam.local:8081 -vframes 1 -threads 1 /home/pi/ftp/files/DuetLapse/octopi/192-168-1-8/598_1_printer_square_calibration/Camera1_00000080.jpeg 2023-02-07 10:24:29,604 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 10:24:29,604 - captureLoop - Getting Status 2023-02-07 10:24:29,605 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:24:32,402 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:24:32,403 - gcodeLoop - Getting Status 2023-02-07 10:24:32,407 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:24:37,446 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:24:37,447 - gcodeLoop - Getting Status 2023-02-07 10:24:37,450 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:24:39,645 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 10:24:39,646 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 10:24:39,672 - captureLoop - elapsed: 10.068374872207642 2023-02-07 10:24:39,673 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 10:24:39,673 - captureLoop - Getting Status 2023-02-07 10:24:39,673 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:24:42,584 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:24:42,585 - gcodeLoop - Getting Status 2023-02-07 10:24:42,587 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:24:47,616 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:24:47,617 - gcodeLoop - Getting Status 2023-02-07 10:24:47,619 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:24:49,707 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 10:24:49,708 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 10:24:49,727 - captureLoop - elapsed: 20.123270988464355 2023-02-07 10:24:49,727 - captureLoop - Calling function Status from Check for Pause with rr_model 2023-02-07 10:24:49,728 - captureLoop - Getting Status 2023-02-07 10:24:49,728 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:24:49,756 - captureLoop - Time - Camera1: capturing frame 81 at layer 31 after 20 seconds 2023-02-07 10:24:51,421 - captureLoop - Command Success : ffmpeg -threads 1 -loglevel quiet -y -i http://cam.local:8081 -vframes 1 -threads 1 /home/pi/ftp/files/DuetLapse/octopi/192-168-1-8/598_1_printer_square_calibration/Camera1_00000081.jpeg 2023-02-07 10:24:51,422 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 10:24:51,422 - captureLoop - Getting Status 2023-02-07 10:24:51,423 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:24:52,656 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:24:52,657 - gcodeLoop - Getting Status 2023-02-07 10:24:52,661 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:24:57,705 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:24:57,706 - gcodeLoop - Getting Status 2023-02-07 10:24:57,706 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:25:01,527 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 10:25:01,528 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 10:25:01,556 - captureLoop - elapsed: 10.13393235206604 2023-02-07 10:25:01,557 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 10:25:01,557 - captureLoop - Getting Status 2023-02-07 10:25:01,558 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:25:02,737 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:25:02,738 - gcodeLoop - Getting Status 2023-02-07 10:25:02,741 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:25:07,796 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:25:07,797 - gcodeLoop - Getting Status 2023-02-07 10:25:07,800 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:25:11,599 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 10:25:11,600 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 10:25:11,628 - captureLoop - elapsed: 20.206363916397095 2023-02-07 10:25:11,630 - captureLoop - Calling function Status from Check for Pause with rr_model 2023-02-07 10:25:11,631 - captureLoop - Getting Status 2023-02-07 10:25:11,632 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:25:11,661 - captureLoop - Time - Camera1: capturing frame 82 at layer 31 after 20 seconds 2023-02-07 10:25:12,836 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:25:12,840 - gcodeLoop - Getting Status 2023-02-07 10:25:12,841 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:25:13,326 - captureLoop - Command Success : ffmpeg -threads 1 -loglevel quiet -y -i http://cam.local:8081 -vframes 1 -threads 1 /home/pi/ftp/files/DuetLapse/octopi/192-168-1-8/598_1_printer_square_calibration/Camera1_00000082.jpeg 2023-02-07 10:25:13,326 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 10:25:13,327 - captureLoop - Getting Status 2023-02-07 10:25:13,327 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:25:17,892 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:25:17,893 - gcodeLoop - Getting Status 2023-02-07 10:25:17,893 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:25:22,948 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:25:22,949 - gcodeLoop - Getting Status 2023-02-07 10:25:22,949 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:25:23,349 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 10:25:23,350 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 10:25:23,380 - captureLoop - elapsed: 10.054004907608032 2023-02-07 10:25:23,381 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 10:25:23,382 - captureLoop - Getting Status 2023-02-07 10:25:23,383 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:25:27,982 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:25:27,982 - gcodeLoop - Getting Status 2023-02-07 10:25:27,983 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:25:33,068 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:25:33,069 - gcodeLoop - Getting Status 2023-02-07 10:25:33,072 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:25:33,416 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 10:25:33,417 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 10:25:33,437 - captureLoop - elapsed: 20.11039710044861 2023-02-07 10:25:33,437 - captureLoop - Calling function Status from Check for Pause with rr_model 2023-02-07 10:25:33,438 - captureLoop - Getting Status 2023-02-07 10:25:33,438 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:25:33,461 - captureLoop - Time - Camera1: capturing frame 83 at layer 32 after 20 seconds 2023-02-07 10:25:35,415 - captureLoop - Command Success : ffmpeg -threads 1 -loglevel quiet -y -i http://cam.local:8081 -vframes 1 -threads 1 /home/pi/ftp/files/DuetLapse/octopi/192-168-1-8/598_1_printer_square_calibration/Camera1_00000083.jpeg 2023-02-07 10:25:35,415 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 10:25:35,416 - captureLoop - Getting Status 2023-02-07 10:25:35,416 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:25:38,096 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:25:38,096 - gcodeLoop - Getting Status 2023-02-07 10:25:38,103 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:25:43,138 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:25:43,139 - gcodeLoop - Getting Status 2023-02-07 10:25:43,142 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:25:45,446 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 10:25:45,446 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 10:25:45,564 - captureLoop - elapsed: 10.148812532424927 2023-02-07 10:25:45,565 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 10:25:45,565 - captureLoop - Getting Status 2023-02-07 10:25:45,566 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:25:48,195 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:25:48,196 - gcodeLoop - Getting Status 2023-02-07 10:25:48,198 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:25:53,337 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:25:53,338 - gcodeLoop - Getting Status 2023-02-07 10:25:53,338 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:25:55,590 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 10:25:55,591 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 10:25:55,620 - captureLoop - elapsed: 20.204254388809204 2023-02-07 10:25:55,621 - captureLoop - Calling function Status from Check for Pause with rr_model 2023-02-07 10:25:55,621 - captureLoop - Getting Status 2023-02-07 10:25:55,622 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:25:55,652 - captureLoop - Time - Camera1: capturing frame 84 at layer 32 after 20 seconds 2023-02-07 10:25:57,361 - captureLoop - Command Success : ffmpeg -threads 1 -loglevel quiet -y -i http://cam.local:8081 -vframes 1 -threads 1 /home/pi/ftp/files/DuetLapse/octopi/192-168-1-8/598_1_printer_square_calibration/Camera1_00000084.jpeg 2023-02-07 10:25:57,362 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 10:25:57,362 - captureLoop - Getting Status 2023-02-07 10:25:57,363 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:25:58,395 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:25:58,397 - gcodeLoop - Getting Status 2023-02-07 10:25:58,400 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:26:03,504 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:26:03,505 - gcodeLoop - Getting Status 2023-02-07 10:26:03,508 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:26:07,457 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 10:26:07,458 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 10:26:07,589 - captureLoop - elapsed: 10.22745394706726 2023-02-07 10:26:07,590 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 10:26:07,591 - captureLoop - Getting Status 2023-02-07 10:26:07,591 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:26:08,548 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:26:08,549 - gcodeLoop - Getting Status 2023-02-07 10:26:08,552 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:26:13,616 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:26:13,617 - gcodeLoop - Getting Status 2023-02-07 10:26:13,617 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:26:17,642 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 10:26:17,643 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 10:26:17,676 - captureLoop - elapsed: 20.314252376556396 2023-02-07 10:26:17,677 - captureLoop - Calling function Status from Check for Pause with rr_model 2023-02-07 10:26:17,678 - captureLoop - Getting Status 2023-02-07 10:26:17,678 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:26:17,726 - captureLoop - Time - Camera1: capturing frame 85 at layer 33 after 20 seconds 2023-02-07 10:26:18,653 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:26:18,658 - gcodeLoop - Getting Status 2023-02-07 10:26:18,659 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:26:19,468 - captureLoop - Command Success : ffmpeg -threads 1 -loglevel quiet -y -i http://cam.local:8081 -vframes 1 -threads 1 /home/pi/ftp/files/DuetLapse/octopi/192-168-1-8/598_1_printer_square_calibration/Camera1_00000085.jpeg 2023-02-07 10:26:19,469 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 10:26:19,469 - captureLoop - Getting Status 2023-02-07 10:26:19,470 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:26:23,695 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:26:23,696 - gcodeLoop - Getting Status 2023-02-07 10:26:23,697 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:26:28,745 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:26:28,746 - gcodeLoop - Getting Status 2023-02-07 10:26:28,747 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:26:29,512 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 10:26:29,513 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 10:26:29,540 - captureLoop - elapsed: 10.071303367614746 2023-02-07 10:26:29,542 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 10:26:29,543 - captureLoop - Getting Status 2023-02-07 10:26:29,543 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:26:33,783 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:26:33,784 - gcodeLoop - Getting Status 2023-02-07 10:26:33,785 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:26:38,905 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:26:38,906 - gcodeLoop - Getting Status 2023-02-07 10:26:38,910 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:26:39,576 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 10:26:39,577 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 10:26:39,597 - captureLoop - elapsed: 20.128259658813477 2023-02-07 10:26:39,598 - captureLoop - Calling function Status from Check for Pause with rr_model 2023-02-07 10:26:39,599 - captureLoop - Getting Status 2023-02-07 10:26:39,599 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:26:39,624 - captureLoop - Time - Camera1: capturing frame 86 at layer 33 after 20 seconds 2023-02-07 10:26:41,367 - captureLoop - Command Success : ffmpeg -threads 1 -loglevel quiet -y -i http://cam.local:8081 -vframes 1 -threads 1 /home/pi/ftp/files/DuetLapse/octopi/192-168-1-8/598_1_printer_square_calibration/Camera1_00000086.jpeg 2023-02-07 10:26:41,368 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 10:26:41,368 - captureLoop - Getting Status 2023-02-07 10:26:41,369 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:26:44,080 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:26:44,081 - gcodeLoop - Getting Status 2023-02-07 10:26:44,081 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:26:49,122 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:26:49,123 - gcodeLoop - Getting Status 2023-02-07 10:26:49,125 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:26:51,492 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 10:26:51,493 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 10:26:51,616 - captureLoop - elapsed: 10.247579574584961 2023-02-07 10:26:51,617 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 10:26:51,618 - captureLoop - Getting Status 2023-02-07 10:26:51,618 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:26:54,268 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:26:54,269 - gcodeLoop - Getting Status 2023-02-07 10:26:54,269 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:26:59,305 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:26:59,306 - gcodeLoop - Getting Status 2023-02-07 10:26:59,309 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:27:01,664 - captureLoop - Calling function Layer from oneInterval with rr_model 2023-02-07 10:27:01,664 - captureLoop - url: http://192.168.1.8/rr_model?key=job.layer post: False 2023-02-07 10:27:01,685 - captureLoop - elapsed: 20.317432165145874 2023-02-07 10:27:01,686 - captureLoop - Calling function Status from Check for Pause with rr_model 2023-02-07 10:27:01,686 - captureLoop - Getting Status 2023-02-07 10:27:01,687 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:27:01,712 - captureLoop - Time - Camera1: capturing frame 87 at layer 33 after 20 seconds 2023-02-07 10:27:03,403 - captureLoop - Command Success : ffmpeg -threads 1 -loglevel quiet -y -i http://cam.local:8081 -vframes 1 -threads 1 /home/pi/ftp/files/DuetLapse/octopi/192-168-1-8/598_1_printer_square_calibration/Camera1_00000087.jpeg 2023-02-07 10:27:03,404 - captureLoop - Calling function Status from unPause with rr_model 2023-02-07 10:27:03,404 - captureLoop - Getting Status 2023-02-07 10:27:03,404 - captureLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:27:04,361 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:27:04,362 - gcodeLoop - Getting Status 2023-02-07 10:27:04,368 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:27:09,413 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:27:09,414 - gcodeLoop - Getting Status 2023-02-07 10:27:09,414 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:27:09,445 - gcodeLoop - url: http://192.168.1.8/rr_gcode?gcode=M117 "" post: False 2023-02-07 10:27:09,470 - gcodeLoop - M117 Command: DuetLapse3.completed 2023-02-07 10:27:09,471 - gcodeLoop - M117 sending to startnextAction: completed 2023-02-07 10:27:09,472 - gcodeLoop - nextAction is available 2023-02-07 10:27:09,474 - nextAction - ++++++ completed state requested ++++++ 2023-02-07 10:27:09,475 - nextAction - nextAction requested stopCaptureLoop 2023-02-07 10:27:09,475 - nextAction - ********* captureLoopState is 0 - Waiting to complete ********* 2023-02-07 10:27:11,478 - nextAction - ********* captureLoopState is 0 - Waiting to complete ********* 2023-02-07 10:27:13,448 - captureLoop - captureLoop stopped 2023-02-07 10:27:13,481 - nextAction - nextAction satisfied waitforCaptureLoop 2023-02-07 10:27:13,482 - nextAction - makeVideo is not running 2023-02-07 10:27:13,483 - nextAction - For Camera1 2023-02-07 10:27:14,480 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:27:14,481 - gcodeLoop - Getting Status 2023-02-07 10:27:14,488 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:27:15,190 - nextAction - Command Success : ffmpeg -threads 1 -loglevel quiet -y -i http://cam.local:8081 -vframes 1 -threads 1 /home/pi/ftp/files/DuetLapse/octopi/192-168-1-8/598_1_printer_square_calibration/Camera1_00000088.jpeg 2023-02-07 10:27:15,190 - nextAction - Copying last frame to extend video by 2 seconds 2023-02-07 10:27:19,563 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:27:19,564 - gcodeLoop - Getting Status 2023-02-07 10:27:19,569 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:27:24,615 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:27:24,616 - gcodeLoop - Getting Status 2023-02-07 10:27:24,618 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:27:29,648 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:27:29,649 - gcodeLoop - Getting Status 2023-02-07 10:27:29,650 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:27:34,684 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:27:34,684 - gcodeLoop - Getting Status 2023-02-07 10:27:34,687 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:27:39,718 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:27:39,719 - gcodeLoop - Getting Status 2023-02-07 10:27:39,720 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:27:44,759 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:27:44,760 - gcodeLoop - Getting Status 2023-02-07 10:27:44,763 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:27:49,796 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:27:49,797 - gcodeLoop - Getting Status 2023-02-07 10:27:49,798 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:27:54,832 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:27:54,833 - gcodeLoop - Getting Status 2023-02-07 10:27:54,834 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:27:59,866 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:27:59,867 - gcodeLoop - Getting Status 2023-02-07 10:27:59,868 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:28:04,904 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:28:04,905 - gcodeLoop - Getting Status 2023-02-07 10:28:04,908 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:28:09,945 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:28:09,946 - gcodeLoop - Getting Status 2023-02-07 10:28:09,946 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:28:14,975 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:28:14,978 - gcodeLoop - Getting Status 2023-02-07 10:28:14,979 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:28:20,006 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:28:20,007 - gcodeLoop - Getting Status 2023-02-07 10:28:20,007 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:28:25,040 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:28:25,041 - gcodeLoop - Getting Status 2023-02-07 10:28:25,042 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:28:30,077 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:28:30,078 - gcodeLoop - Getting Status 2023-02-07 10:28:30,080 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:28:35,108 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:28:35,109 - gcodeLoop - Getting Status 2023-02-07 10:28:35,113 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:28:40,149 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:28:40,149 - gcodeLoop - Getting Status 2023-02-07 10:28:40,152 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:28:45,182 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:28:45,183 - gcodeLoop - Getting Status 2023-02-07 10:28:45,185 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:28:50,220 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:28:50,220 - gcodeLoop - Getting Status 2023-02-07 10:28:50,223 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:28:55,252 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:28:55,253 - gcodeLoop - Getting Status 2023-02-07 10:28:55,256 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:29:00,284 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:29:00,285 - gcodeLoop - Getting Status 2023-02-07 10:29:00,288 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:29:05,321 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:29:05,322 - gcodeLoop - Getting Status 2023-02-07 10:29:05,325 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:29:10,363 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:29:10,363 - gcodeLoop - Getting Status 2023-02-07 10:29:10,366 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:29:15,394 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:29:15,395 - gcodeLoop - Getting Status 2023-02-07 10:29:15,398 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:29:20,434 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:29:20,434 - gcodeLoop - Getting Status 2023-02-07 10:29:20,437 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:29:25,466 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:29:25,467 - gcodeLoop - Getting Status 2023-02-07 10:29:25,470 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:29:30,507 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:29:30,508 - gcodeLoop - Getting Status 2023-02-07 10:29:30,508 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:29:35,544 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:29:35,545 - gcodeLoop - Getting Status 2023-02-07 10:29:35,547 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:29:40,575 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:29:40,576 - gcodeLoop - Getting Status 2023-02-07 10:29:40,577 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:29:45,627 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:29:45,628 - gcodeLoop - Getting Status 2023-02-07 10:29:45,629 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:29:50,665 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:29:50,666 - gcodeLoop - Getting Status 2023-02-07 10:29:50,667 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:29:55,705 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:29:55,706 - gcodeLoop - Getting Status 2023-02-07 10:29:55,709 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:30:00,744 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:30:00,744 - gcodeLoop - Getting Status 2023-02-07 10:30:00,750 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:30:05,776 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:30:05,777 - gcodeLoop - Getting Status 2023-02-07 10:30:05,782 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:30:10,815 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:30:10,816 - gcodeLoop - Getting Status 2023-02-07 10:30:10,819 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:30:15,856 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:30:15,856 - gcodeLoop - Getting Status 2023-02-07 10:30:15,857 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:30:20,884 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:30:20,885 - gcodeLoop - Getting Status 2023-02-07 10:30:20,885 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:30:26,020 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:30:26,021 - gcodeLoop - Getting Status 2023-02-07 10:30:26,021 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:30:31,053 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:30:31,054 - gcodeLoop - Getting Status 2023-02-07 10:30:31,057 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:30:36,092 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:30:36,093 - gcodeLoop - Getting Status 2023-02-07 10:30:36,096 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:30:41,146 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:30:41,147 - gcodeLoop - Getting Status 2023-02-07 10:30:41,150 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:30:46,187 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:30:46,188 - gcodeLoop - Getting Status 2023-02-07 10:30:46,188 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:30:51,231 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:30:51,232 - gcodeLoop - Getting Status 2023-02-07 10:30:51,233 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:30:56,266 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:30:56,266 - gcodeLoop - Getting Status 2023-02-07 10:30:56,269 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:31:01,296 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:31:01,297 - gcodeLoop - Getting Status 2023-02-07 10:31:01,299 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:31:06,329 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:31:06,329 - gcodeLoop - Getting Status 2023-02-07 10:31:06,330 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:31:11,360 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:31:11,361 - gcodeLoop - Getting Status 2023-02-07 10:31:11,361 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:31:16,399 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:31:16,400 - gcodeLoop - Getting Status 2023-02-07 10:31:16,404 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:31:21,432 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:31:21,433 - gcodeLoop - Getting Status 2023-02-07 10:31:21,435 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:31:26,469 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:31:26,469 - gcodeLoop - Getting Status 2023-02-07 10:31:26,472 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:31:31,519 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:31:31,520 - gcodeLoop - Getting Status 2023-02-07 10:31:31,523 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:31:36,557 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:31:36,558 - gcodeLoop - Getting Status 2023-02-07 10:31:36,561 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:31:41,602 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:31:41,603 - gcodeLoop - Getting Status 2023-02-07 10:31:41,606 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:31:46,635 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:31:46,636 - gcodeLoop - Getting Status 2023-02-07 10:31:46,637 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:31:51,676 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:31:51,677 - gcodeLoop - Getting Status 2023-02-07 10:31:51,677 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:31:56,713 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:31:56,714 - gcodeLoop - Getting Status 2023-02-07 10:31:56,717 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:32:01,759 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:32:01,760 - gcodeLoop - Getting Status 2023-02-07 10:32:01,763 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:32:06,802 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:32:06,803 - gcodeLoop - Getting Status 2023-02-07 10:32:06,806 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:32:11,847 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:32:11,848 - gcodeLoop - Getting Status 2023-02-07 10:32:11,849 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:32:16,879 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:32:16,880 - gcodeLoop - Getting Status 2023-02-07 10:32:16,880 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:32:21,916 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:32:21,917 - gcodeLoop - Getting Status 2023-02-07 10:32:21,920 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:32:26,949 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:32:26,950 - gcodeLoop - Getting Status 2023-02-07 10:32:26,951 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:32:31,988 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:32:31,988 - gcodeLoop - Getting Status 2023-02-07 10:32:31,991 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:32:37,019 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:32:37,020 - gcodeLoop - Getting Status 2023-02-07 10:32:37,022 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:32:42,061 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:32:42,061 - gcodeLoop - Getting Status 2023-02-07 10:32:42,064 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:32:47,092 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:32:47,093 - gcodeLoop - Getting Status 2023-02-07 10:32:47,097 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:32:52,132 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:32:52,133 - gcodeLoop - Getting Status 2023-02-07 10:32:52,136 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:32:57,167 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:32:57,167 - gcodeLoop - Getting Status 2023-02-07 10:32:57,170 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:33:02,199 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:33:02,199 - gcodeLoop - Getting Status 2023-02-07 10:33:02,200 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:33:07,228 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:33:07,229 - gcodeLoop - Getting Status 2023-02-07 10:33:07,229 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:33:12,267 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:33:12,268 - gcodeLoop - Getting Status 2023-02-07 10:33:12,270 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:33:17,298 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:33:17,299 - gcodeLoop - Getting Status 2023-02-07 10:33:17,302 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:33:22,343 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:33:22,344 - gcodeLoop - Getting Status 2023-02-07 10:33:22,347 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:33:27,397 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:33:27,398 - gcodeLoop - Getting Status 2023-02-07 10:33:27,398 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:33:32,440 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:33:32,441 - gcodeLoop - Getting Status 2023-02-07 10:33:32,442 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:33:37,489 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:33:37,489 - gcodeLoop - Getting Status 2023-02-07 10:33:37,492 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:33:42,521 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:33:42,522 - gcodeLoop - Getting Status 2023-02-07 10:33:42,522 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:33:47,554 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:33:47,558 - gcodeLoop - Getting Status 2023-02-07 10:33:47,559 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:33:52,595 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:33:52,595 - gcodeLoop - Getting Status 2023-02-07 10:33:52,596 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:33:57,643 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:33:57,644 - gcodeLoop - Getting Status 2023-02-07 10:33:57,645 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:34:02,686 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:34:02,687 - gcodeLoop - Getting Status 2023-02-07 10:34:02,690 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:34:07,733 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:34:07,734 - gcodeLoop - Getting Status 2023-02-07 10:34:07,735 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:34:12,771 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:34:12,772 - gcodeLoop - Getting Status 2023-02-07 10:34:12,775 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:34:17,815 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:34:17,816 - gcodeLoop - Getting Status 2023-02-07 10:34:17,816 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:34:22,844 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:34:22,845 - gcodeLoop - Getting Status 2023-02-07 10:34:22,845 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:34:27,875 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:34:27,876 - gcodeLoop - Getting Status 2023-02-07 10:34:27,876 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:34:32,902 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:34:32,903 - gcodeLoop - Getting Status 2023-02-07 10:34:32,907 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:34:37,943 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:34:37,944 - gcodeLoop - Getting Status 2023-02-07 10:34:37,946 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:34:42,984 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:34:42,985 - gcodeLoop - Getting Status 2023-02-07 10:34:42,990 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:34:48,026 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:34:48,026 - gcodeLoop - Getting Status 2023-02-07 10:34:48,029 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:34:53,062 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:34:53,063 - gcodeLoop - Getting Status 2023-02-07 10:34:53,064 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:34:58,106 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:34:58,106 - gcodeLoop - Getting Status 2023-02-07 10:34:58,107 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:35:03,135 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:35:03,135 - gcodeLoop - Getting Status 2023-02-07 10:35:03,136 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:35:08,173 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:35:08,174 - gcodeLoop - Getting Status 2023-02-07 10:35:08,177 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:35:13,235 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:35:13,236 - gcodeLoop - Getting Status 2023-02-07 10:35:13,239 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:35:18,278 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:35:18,279 - gcodeLoop - Getting Status 2023-02-07 10:35:18,282 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:35:23,306 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:35:23,307 - gcodeLoop - Getting Status 2023-02-07 10:35:23,307 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:35:28,423 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:35:28,424 - gcodeLoop - Getting Status 2023-02-07 10:35:28,424 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:35:33,458 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:35:33,459 - gcodeLoop - Getting Status 2023-02-07 10:35:33,460 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:35:38,499 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:35:38,500 - gcodeLoop - Getting Status 2023-02-07 10:35:38,503 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:35:43,536 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:35:43,536 - gcodeLoop - Getting Status 2023-02-07 10:35:43,543 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:35:48,594 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:35:48,595 - gcodeLoop - Getting Status 2023-02-07 10:35:48,595 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:35:53,627 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:35:53,628 - gcodeLoop - Getting Status 2023-02-07 10:35:53,631 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:35:58,664 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:35:58,665 - gcodeLoop - Getting Status 2023-02-07 10:35:58,668 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:36:03,703 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:36:03,704 - gcodeLoop - Getting Status 2023-02-07 10:36:03,704 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:36:08,739 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:36:08,740 - gcodeLoop - Getting Status 2023-02-07 10:36:08,741 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:36:13,890 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:36:13,891 - gcodeLoop - Getting Status 2023-02-07 10:36:13,892 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:36:19,010 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:36:19,011 - gcodeLoop - Getting Status 2023-02-07 10:36:19,015 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:36:24,133 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:36:24,134 - gcodeLoop - Getting Status 2023-02-07 10:36:24,135 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:36:29,251 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:36:29,251 - gcodeLoop - Getting Status 2023-02-07 10:36:29,254 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:36:34,368 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:36:34,369 - gcodeLoop - Getting Status 2023-02-07 10:36:34,369 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:36:39,394 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:36:39,395 - gcodeLoop - Getting Status 2023-02-07 10:36:39,400 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:36:44,436 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:36:44,437 - gcodeLoop - Getting Status 2023-02-07 10:36:44,440 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:36:49,486 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:36:49,487 - gcodeLoop - Getting Status 2023-02-07 10:36:49,488 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:36:54,544 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:36:54,544 - gcodeLoop - Getting Status 2023-02-07 10:36:54,546 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:36:59,666 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:36:59,667 - gcodeLoop - Getting Status 2023-02-07 10:36:59,668 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:37:04,783 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:37:04,784 - gcodeLoop - Getting Status 2023-02-07 10:37:04,787 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:37:09,825 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:37:09,826 - gcodeLoop - Getting Status 2023-02-07 10:37:09,827 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:37:14,916 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:37:14,917 - gcodeLoop - Getting Status 2023-02-07 10:37:14,917 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:37:20,040 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:37:20,040 - gcodeLoop - Getting Status 2023-02-07 10:37:20,041 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:37:25,071 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:37:25,072 - gcodeLoop - Getting Status 2023-02-07 10:37:25,075 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:37:30,177 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:37:30,177 - gcodeLoop - Getting Status 2023-02-07 10:37:30,178 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:37:35,301 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:37:35,302 - gcodeLoop - Getting Status 2023-02-07 10:37:35,305 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:37:40,336 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:37:40,336 - gcodeLoop - Getting Status 2023-02-07 10:37:40,337 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:37:45,364 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:37:45,365 - gcodeLoop - Getting Status 2023-02-07 10:37:45,369 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:37:50,402 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:37:50,402 - gcodeLoop - Getting Status 2023-02-07 10:37:50,408 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:37:55,460 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:37:55,460 - gcodeLoop - Getting Status 2023-02-07 10:37:55,463 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:38:00,616 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:38:00,616 - gcodeLoop - Getting Status 2023-02-07 10:38:00,619 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:38:05,717 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:38:05,718 - gcodeLoop - Getting Status 2023-02-07 10:38:05,722 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:38:10,832 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:38:10,832 - gcodeLoop - Getting Status 2023-02-07 10:38:10,838 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:38:15,873 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:38:15,874 - gcodeLoop - Getting Status 2023-02-07 10:38:15,875 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:38:20,966 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:38:20,967 - gcodeLoop - Getting Status 2023-02-07 10:38:20,969 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:38:26,004 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:38:26,004 - gcodeLoop - Getting Status 2023-02-07 10:38:26,007 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:38:31,104 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:38:31,105 - gcodeLoop - Getting Status 2023-02-07 10:38:31,107 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:38:36,136 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:38:36,136 - gcodeLoop - Getting Status 2023-02-07 10:38:36,139 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:38:41,166 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:38:41,167 - gcodeLoop - Getting Status 2023-02-07 10:38:41,168 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:38:46,204 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:38:46,205 - gcodeLoop - Getting Status 2023-02-07 10:38:46,207 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:38:51,296 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:38:51,297 - gcodeLoop - Getting Status 2023-02-07 10:38:51,298 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:38:56,399 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:38:56,400 - gcodeLoop - Getting Status 2023-02-07 10:38:56,403 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:39:01,534 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:39:01,535 - gcodeLoop - Getting Status 2023-02-07 10:39:01,538 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:39:06,572 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:39:06,573 - gcodeLoop - Getting Status 2023-02-07 10:39:06,579 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:39:11,612 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:39:11,613 - gcodeLoop - Getting Status 2023-02-07 10:39:11,617 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:39:16,651 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:39:16,652 - gcodeLoop - Getting Status 2023-02-07 10:39:16,655 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:39:21,796 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:39:21,796 - gcodeLoop - Getting Status 2023-02-07 10:39:21,797 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:39:26,831 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:39:26,832 - gcodeLoop - Getting Status 2023-02-07 10:39:26,836 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:39:31,945 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:39:31,945 - gcodeLoop - Getting Status 2023-02-07 10:39:31,946 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:39:36,976 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:39:36,977 - gcodeLoop - Getting Status 2023-02-07 10:39:36,977 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:39:42,021 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:39:42,021 - gcodeLoop - Getting Status 2023-02-07 10:39:42,022 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:39:47,050 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:39:47,051 - gcodeLoop - Getting Status 2023-02-07 10:39:47,054 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:39:52,105 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:39:52,105 - gcodeLoop - Getting Status 2023-02-07 10:39:52,108 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:39:57,136 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:39:57,137 - gcodeLoop - Getting Status 2023-02-07 10:39:57,139 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:40:02,244 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:40:02,245 - gcodeLoop - Getting Status 2023-02-07 10:40:02,247 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:40:07,362 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:40:07,363 - gcodeLoop - Getting Status 2023-02-07 10:40:07,364 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:40:12,392 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:40:12,392 - gcodeLoop - Getting Status 2023-02-07 10:40:12,395 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:40:17,422 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:40:17,423 - gcodeLoop - Getting Status 2023-02-07 10:40:17,427 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:40:22,466 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:40:22,467 - gcodeLoop - Getting Status 2023-02-07 10:40:22,468 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:40:27,504 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:40:27,505 - gcodeLoop - Getting Status 2023-02-07 10:40:27,506 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:40:32,657 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:40:32,658 - gcodeLoop - Getting Status 2023-02-07 10:40:32,658 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:40:37,699 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:40:37,700 - gcodeLoop - Getting Status 2023-02-07 10:40:37,703 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:40:42,742 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:40:42,742 - gcodeLoop - Getting Status 2023-02-07 10:40:42,745 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:40:47,773 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:40:47,773 - gcodeLoop - Getting Status 2023-02-07 10:40:47,776 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:40:52,806 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:40:52,807 - gcodeLoop - Getting Status 2023-02-07 10:40:52,811 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:40:57,946 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:40:57,946 - gcodeLoop - Getting Status 2023-02-07 10:40:57,947 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:41:02,974 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:41:02,975 - gcodeLoop - Getting Status 2023-02-07 10:41:02,979 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:41:08,011 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:41:08,011 - gcodeLoop - Getting Status 2023-02-07 10:41:08,012 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:41:13,112 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:41:13,113 - gcodeLoop - Getting Status 2023-02-07 10:41:13,114 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:41:18,156 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:41:18,157 - gcodeLoop - Getting Status 2023-02-07 10:41:18,157 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:41:23,248 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:41:23,248 - gcodeLoop - Getting Status 2023-02-07 10:41:23,249 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:41:28,366 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:41:28,367 - gcodeLoop - Getting Status 2023-02-07 10:41:28,367 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:41:33,486 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:41:33,487 - gcodeLoop - Getting Status 2023-02-07 10:41:33,488 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:41:38,528 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:41:38,528 - gcodeLoop - Getting Status 2023-02-07 10:41:38,531 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:41:43,630 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:41:43,631 - gcodeLoop - Getting Status 2023-02-07 10:41:43,634 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:41:48,746 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:41:48,747 - gcodeLoop - Getting Status 2023-02-07 10:41:48,750 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:41:53,780 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:41:53,781 - gcodeLoop - Getting Status 2023-02-07 10:41:53,784 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:41:58,816 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:41:58,817 - gcodeLoop - Getting Status 2023-02-07 10:41:58,821 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:42:03,903 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:42:03,904 - gcodeLoop - Getting Status 2023-02-07 10:42:03,904 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:42:08,936 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:42:08,936 - gcodeLoop - Getting Status 2023-02-07 10:42:08,940 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:42:13,966 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:42:13,967 - gcodeLoop - Getting Status 2023-02-07 10:42:13,967 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:42:18,993 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:42:18,994 - gcodeLoop - Getting Status 2023-02-07 10:42:18,995 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:42:24,030 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:42:24,031 - gcodeLoop - Getting Status 2023-02-07 10:42:24,034 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:42:29,063 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:42:29,065 - gcodeLoop - Getting Status 2023-02-07 10:42:29,066 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:42:34,208 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:42:34,209 - gcodeLoop - Getting Status 2023-02-07 10:42:34,209 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:42:39,325 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:42:39,326 - gcodeLoop - Getting Status 2023-02-07 10:42:39,329 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:42:44,357 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:42:44,357 - gcodeLoop - Getting Status 2023-02-07 10:42:44,360 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:42:49,465 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:42:49,466 - gcodeLoop - Getting Status 2023-02-07 10:42:49,469 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:42:54,586 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:42:54,587 - gcodeLoop - Getting Status 2023-02-07 10:42:54,587 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:42:59,614 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:42:59,615 - gcodeLoop - Getting Status 2023-02-07 10:42:59,615 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:43:04,727 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:43:04,728 - gcodeLoop - Getting Status 2023-02-07 10:43:04,728 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:43:09,846 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:43:09,847 - gcodeLoop - Getting Status 2023-02-07 10:43:09,850 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:43:14,964 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:43:14,965 - gcodeLoop - Getting Status 2023-02-07 10:43:14,969 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:43:20,004 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:43:20,005 - gcodeLoop - Getting Status 2023-02-07 10:43:20,006 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:43:25,106 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:43:25,107 - gcodeLoop - Getting Status 2023-02-07 10:43:25,111 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:43:30,229 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:43:30,230 - gcodeLoop - Getting Status 2023-02-07 10:43:30,233 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:43:35,339 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:43:35,340 - gcodeLoop - Getting Status 2023-02-07 10:43:35,342 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:43:40,366 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:43:40,366 - gcodeLoop - Getting Status 2023-02-07 10:43:40,369 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:43:45,403 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:43:45,404 - gcodeLoop - Getting Status 2023-02-07 10:43:45,407 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:43:50,498 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:43:50,499 - gcodeLoop - Getting Status 2023-02-07 10:43:50,502 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:43:55,536 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:43:55,537 - gcodeLoop - Getting Status 2023-02-07 10:43:55,538 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:44:00,635 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:44:00,635 - gcodeLoop - Getting Status 2023-02-07 10:44:00,638 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:44:05,761 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:44:05,762 - gcodeLoop - Getting Status 2023-02-07 10:44:05,765 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:44:10,799 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:44:10,800 - gcodeLoop - Getting Status 2023-02-07 10:44:10,800 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:44:15,896 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:44:15,896 - gcodeLoop - Getting Status 2023-02-07 10:44:15,897 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:44:21,010 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:44:21,011 - gcodeLoop - Getting Status 2023-02-07 10:44:21,014 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:44:26,045 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:44:26,046 - gcodeLoop - Getting Status 2023-02-07 10:44:26,046 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:44:31,150 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:44:31,151 - gcodeLoop - Getting Status 2023-02-07 10:44:31,152 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:44:36,187 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:44:36,188 - gcodeLoop - Getting Status 2023-02-07 10:44:36,189 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:44:41,245 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:44:41,246 - gcodeLoop - Getting Status 2023-02-07 10:44:41,251 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:44:46,309 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:44:46,310 - gcodeLoop - Getting Status 2023-02-07 10:44:46,311 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:44:51,427 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:44:51,428 - gcodeLoop - Getting Status 2023-02-07 10:44:51,432 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:44:56,470 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:44:56,471 - gcodeLoop - Getting Status 2023-02-07 10:44:56,472 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:45:01,563 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:45:01,564 - gcodeLoop - Getting Status 2023-02-07 10:45:01,567 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:45:06,689 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:45:06,690 - gcodeLoop - Getting Status 2023-02-07 10:45:06,693 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:45:11,801 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:45:11,802 - gcodeLoop - Getting Status 2023-02-07 10:45:11,805 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:45:16,842 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:45:16,843 - gcodeLoop - Getting Status 2023-02-07 10:45:16,845 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:45:21,883 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:45:21,884 - gcodeLoop - Getting Status 2023-02-07 10:45:21,884 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:45:26,966 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:45:26,967 - gcodeLoop - Getting Status 2023-02-07 10:45:26,968 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:45:32,005 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:45:32,006 - gcodeLoop - Getting Status 2023-02-07 10:45:32,009 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:45:37,097 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:45:37,098 - gcodeLoop - Getting Status 2023-02-07 10:45:37,101 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:45:42,219 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:45:42,220 - gcodeLoop - Getting Status 2023-02-07 10:45:42,229 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:45:47,258 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:45:47,259 - gcodeLoop - Getting Status 2023-02-07 10:45:47,259 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:45:52,296 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:45:52,297 - gcodeLoop - Getting Status 2023-02-07 10:45:52,297 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:45:57,329 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:45:57,330 - gcodeLoop - Getting Status 2023-02-07 10:45:57,331 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:46:02,386 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:46:02,387 - gcodeLoop - Getting Status 2023-02-07 10:46:02,389 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:46:07,515 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:46:07,516 - gcodeLoop - Getting Status 2023-02-07 10:46:07,520 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:46:12,555 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:46:12,555 - gcodeLoop - Getting Status 2023-02-07 10:46:12,558 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:46:17,648 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:46:17,649 - gcodeLoop - Getting Status 2023-02-07 10:46:17,652 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:46:22,772 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:46:22,773 - gcodeLoop - Getting Status 2023-02-07 10:46:22,776 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:46:27,823 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:46:27,823 - gcodeLoop - Getting Status 2023-02-07 10:46:27,826 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:46:32,898 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:46:32,898 - gcodeLoop - Getting Status 2023-02-07 10:46:32,901 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:46:37,926 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:46:37,927 - gcodeLoop - Getting Status 2023-02-07 10:46:37,927 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:46:42,954 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:46:42,955 - gcodeLoop - Getting Status 2023-02-07 10:46:42,959 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:46:47,996 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:46:47,997 - gcodeLoop - Getting Status 2023-02-07 10:46:47,997 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:46:53,026 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:46:53,027 - gcodeLoop - Getting Status 2023-02-07 10:46:53,028 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:46:58,064 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:46:58,064 - gcodeLoop - Getting Status 2023-02-07 10:46:58,065 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:47:03,111 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:47:03,112 - gcodeLoop - Getting Status 2023-02-07 10:47:03,115 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:47:08,237 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:47:08,237 - gcodeLoop - Getting Status 2023-02-07 10:47:08,240 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:47:13,356 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:47:13,356 - gcodeLoop - Getting Status 2023-02-07 10:47:13,357 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:47:18,475 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:47:18,476 - gcodeLoop - Getting Status 2023-02-07 10:47:18,477 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:47:23,540 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:47:23,541 - gcodeLoop - Getting Status 2023-02-07 10:47:23,545 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:47:28,608 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:47:28,609 - gcodeLoop - Getting Status 2023-02-07 10:47:28,609 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:47:33,732 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:47:33,733 - gcodeLoop - Getting Status 2023-02-07 10:47:33,736 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:47:38,858 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:47:38,859 - gcodeLoop - Getting Status 2023-02-07 10:47:38,863 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:47:43,973 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:47:43,974 - gcodeLoop - Getting Status 2023-02-07 10:47:43,975 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:47:49,007 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:47:49,008 - gcodeLoop - Getting Status 2023-02-07 10:47:49,011 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:47:54,046 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:47:54,046 - gcodeLoop - Getting Status 2023-02-07 10:47:54,049 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:47:59,081 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:47:59,082 - gcodeLoop - Getting Status 2023-02-07 10:47:59,084 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:48:04,115 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:48:04,115 - gcodeLoop - Getting Status 2023-02-07 10:48:04,118 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:48:09,269 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:48:09,270 - gcodeLoop - Getting Status 2023-02-07 10:48:09,270 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:48:14,305 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:48:14,306 - gcodeLoop - Getting Status 2023-02-07 10:48:14,306 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:48:19,336 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:48:19,337 - gcodeLoop - Getting Status 2023-02-07 10:48:19,340 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:48:24,372 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:48:24,372 - gcodeLoop - Getting Status 2023-02-07 10:48:24,375 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:48:29,408 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:48:29,409 - gcodeLoop - Getting Status 2023-02-07 10:48:29,413 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:48:34,569 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:48:34,570 - gcodeLoop - Getting Status 2023-02-07 10:48:34,572 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:48:39,605 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:48:39,606 - gcodeLoop - Getting Status 2023-02-07 10:48:39,606 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:48:44,638 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:48:44,639 - gcodeLoop - Getting Status 2023-02-07 10:48:44,641 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:48:49,712 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:48:49,713 - gcodeLoop - Getting Status 2023-02-07 10:48:49,716 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:48:54,837 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:48:54,838 - gcodeLoop - Getting Status 2023-02-07 10:48:54,838 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:48:59,955 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:48:59,956 - gcodeLoop - Getting Status 2023-02-07 10:48:59,956 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:49:04,980 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:49:04,981 - gcodeLoop - Getting Status 2023-02-07 10:49:04,985 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:49:10,020 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:49:10,021 - gcodeLoop - Getting Status 2023-02-07 10:49:10,023 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:49:15,051 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:49:15,052 - gcodeLoop - Getting Status 2023-02-07 10:49:15,053 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:49:20,092 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:49:20,092 - gcodeLoop - Getting Status 2023-02-07 10:49:20,093 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:49:25,136 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:49:25,137 - gcodeLoop - Getting Status 2023-02-07 10:49:25,138 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:49:30,267 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:49:30,268 - gcodeLoop - Getting Status 2023-02-07 10:49:30,270 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:49:35,294 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:49:35,295 - gcodeLoop - Getting Status 2023-02-07 10:49:35,296 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:49:40,326 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:49:40,327 - gcodeLoop - Getting Status 2023-02-07 10:49:40,329 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:49:45,375 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:49:45,376 - gcodeLoop - Getting Status 2023-02-07 10:49:45,378 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:49:50,415 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:49:50,416 - gcodeLoop - Getting Status 2023-02-07 10:49:50,418 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:49:55,558 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:49:55,559 - gcodeLoop - Getting Status 2023-02-07 10:49:55,562 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:50:00,676 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:50:00,677 - gcodeLoop - Getting Status 2023-02-07 10:50:00,679 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:50:05,793 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:50:05,794 - gcodeLoop - Getting Status 2023-02-07 10:50:05,796 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:50:10,828 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:50:10,829 - gcodeLoop - Getting Status 2023-02-07 10:50:10,829 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:50:15,936 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:50:15,937 - gcodeLoop - Getting Status 2023-02-07 10:50:15,937 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:50:21,054 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:50:21,055 - gcodeLoop - Getting Status 2023-02-07 10:50:21,059 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:50:26,176 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:50:26,176 - gcodeLoop - Getting Status 2023-02-07 10:50:26,179 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:50:31,208 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:50:31,209 - gcodeLoop - Getting Status 2023-02-07 10:50:31,212 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:50:36,248 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:50:36,249 - gcodeLoop - Getting Status 2023-02-07 10:50:36,249 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:50:41,293 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:50:41,294 - gcodeLoop - Getting Status 2023-02-07 10:50:41,294 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:50:46,346 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:50:46,347 - gcodeLoop - Getting Status 2023-02-07 10:50:46,351 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:50:51,383 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:50:51,383 - gcodeLoop - Getting Status 2023-02-07 10:50:51,384 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:50:56,415 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:50:56,416 - gcodeLoop - Getting Status 2023-02-07 10:50:56,418 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:51:01,510 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:51:01,511 - gcodeLoop - Getting Status 2023-02-07 10:51:01,516 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:51:06,568 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:51:06,569 - gcodeLoop - Getting Status 2023-02-07 10:51:06,569 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:51:11,599 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:51:11,600 - gcodeLoop - Getting Status 2023-02-07 10:51:11,601 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:51:16,657 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:51:16,658 - gcodeLoop - Getting Status 2023-02-07 10:51:16,661 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:51:21,778 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:51:21,779 - gcodeLoop - Getting Status 2023-02-07 10:51:21,782 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:51:26,817 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:51:26,818 - gcodeLoop - Getting Status 2023-02-07 10:51:26,819 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:51:31,916 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:51:31,916 - gcodeLoop - Getting Status 2023-02-07 10:51:31,917 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:51:36,942 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:51:36,943 - gcodeLoop - Getting Status 2023-02-07 10:51:36,944 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:51:41,975 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:51:41,976 - gcodeLoop - Getting Status 2023-02-07 10:51:41,978 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:51:47,005 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:51:47,007 - gcodeLoop - Getting Status 2023-02-07 10:51:47,007 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:51:52,042 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:51:52,043 - gcodeLoop - Getting Status 2023-02-07 10:51:52,045 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:51:57,075 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:51:57,076 - gcodeLoop - Getting Status 2023-02-07 10:51:57,079 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:52:02,227 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:52:02,228 - gcodeLoop - Getting Status 2023-02-07 10:52:02,231 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:52:07,259 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:52:07,260 - gcodeLoop - Getting Status 2023-02-07 10:52:07,263 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:52:12,292 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:52:12,292 - gcodeLoop - Getting Status 2023-02-07 10:52:12,293 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:52:17,382 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:52:17,382 - gcodeLoop - Getting Status 2023-02-07 10:52:17,385 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:52:22,504 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:52:22,505 - gcodeLoop - Getting Status 2023-02-07 10:52:22,509 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:52:27,545 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:52:27,546 - gcodeLoop - Getting Status 2023-02-07 10:52:27,549 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:52:32,644 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:52:32,645 - gcodeLoop - Getting Status 2023-02-07 10:52:32,648 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:52:37,760 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:52:37,761 - gcodeLoop - Getting Status 2023-02-07 10:52:37,764 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:52:42,820 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:52:42,820 - gcodeLoop - Getting Status 2023-02-07 10:52:42,823 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:52:47,864 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:52:47,865 - gcodeLoop - Getting Status 2023-02-07 10:52:47,868 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:52:52,914 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:52:52,915 - gcodeLoop - Getting Status 2023-02-07 10:52:52,918 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:52:57,953 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:52:57,953 - gcodeLoop - Getting Status 2023-02-07 10:52:57,957 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:53:02,996 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:53:02,997 - gcodeLoop - Getting Status 2023-02-07 10:53:03,000 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:53:08,047 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:53:08,048 - gcodeLoop - Getting Status 2023-02-07 10:53:08,050 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:53:13,190 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:53:13,191 - gcodeLoop - Getting Status 2023-02-07 10:53:13,193 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:53:18,226 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:53:18,226 - gcodeLoop - Getting Status 2023-02-07 10:53:18,227 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:53:23,336 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:53:23,337 - gcodeLoop - Getting Status 2023-02-07 10:53:23,338 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:53:28,376 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:53:28,377 - gcodeLoop - Getting Status 2023-02-07 10:53:28,380 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:53:33,480 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:53:33,481 - gcodeLoop - Getting Status 2023-02-07 10:53:33,481 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:53:38,514 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:53:38,514 - gcodeLoop - Getting Status 2023-02-07 10:53:38,515 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:53:43,610 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:53:43,611 - gcodeLoop - Getting Status 2023-02-07 10:53:43,612 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:53:48,725 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:53:48,726 - gcodeLoop - Getting Status 2023-02-07 10:53:48,727 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:53:53,771 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:53:53,772 - gcodeLoop - Getting Status 2023-02-07 10:53:53,775 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:53:58,811 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:53:58,812 - gcodeLoop - Getting Status 2023-02-07 10:53:58,813 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:54:03,892 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:54:03,893 - gcodeLoop - Getting Status 2023-02-07 10:54:03,894 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:54:08,933 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:54:08,934 - gcodeLoop - Getting Status 2023-02-07 10:54:08,937 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:54:14,027 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:54:14,027 - gcodeLoop - Getting Status 2023-02-07 10:54:14,030 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:54:19,133 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:54:19,133 - gcodeLoop - Getting Status 2023-02-07 10:54:19,136 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:54:24,165 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:54:24,166 - gcodeLoop - Getting Status 2023-02-07 10:54:24,168 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:54:27,896 - Thread-161 - !!!!! http call: {'displayStatus': ['true']} !!!!! 2023-02-07 10:54:27,945 - Thread-162 - !!!!! http call: {'getfile': ['/home/pi/ftp/files/DuetLapse/octopi/192-168-1-8/598_1_printer_square_calibration/Camera1_00000088.jpeg']} !!!!! 2023-02-07 10:54:27,946 - Thread-162 - Trying to get file /home/pi/ftp/files/DuetLapse/octopi/192-168-1-8/598_1_printer_square_calibration/Camera1_00000088.jpeg 2023-02-07 10:54:27,946 - Thread-162 - image/jpeg 2023-02-07 10:54:29,272 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:54:29,273 - gcodeLoop - Getting Status 2023-02-07 10:54:29,273 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:54:33,301 - Thread-171 - !!!!! http call: {'displayStatus': ['true']} !!!!! 2023-02-07 10:54:34,344 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:54:34,345 - gcodeLoop - Getting Status 2023-02-07 10:54:34,345 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:54:37,841 - Thread-172 - !!!!! http call: {'displayStatus': ['true']} !!!!! 2023-02-07 10:54:39,374 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:54:39,375 - gcodeLoop - Getting Status 2023-02-07 10:54:39,379 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:54:42,881 - Thread-173 - !!!!! http call: {'displayStatus': ['true']} !!!!! 2023-02-07 10:54:43,574 - Thread-174 - !!!!! http call: {'displayVideo': ['true']} !!!!! 2023-02-07 10:54:44,425 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:54:44,426 - gcodeLoop - Getting Status 2023-02-07 10:54:44,430 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:54:46,553 - Thread-175 - !!!!! http call: {'displayFiles': ['true']} !!!!! 2023-02-07 10:54:46,554 - Thread-175 - list_dir called with path = /home/pi/ftp/files/DuetLapse/octopi/192-168-1-8 2023-02-07 10:54:46,597 - Thread-175 - Finished parsing the files directory 2023-02-07 10:54:49,464 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:54:49,465 - gcodeLoop - Getting Status 2023-02-07 10:54:49,468 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:54:54,121 - Thread-176 - !!!!! http call: {'displayFiles': ['/home/pi/ftp/files/DuetLapse/octopi/192-168-1-8/598_1_printer_square_calibration']} !!!!! 2023-02-07 10:54:54,122 - Thread-176 - list_dir called with path = /home/pi/ftp/files/DuetLapse/octopi/192-168-1-8/598_1_printer_square_calibration 2023-02-07 10:54:54,139 - Thread-176 - Finished parsing the files directory 2023-02-07 10:54:54,513 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:54:54,514 - gcodeLoop - Getting Status 2023-02-07 10:54:54,516 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:54:56,921 - Thread-177 - !!!!! http call: {'displayFiles': ['/home/pi/ftp/files/DuetLapse/octopi/192-168-1-8']} !!!!! 2023-02-07 10:54:56,922 - Thread-177 - list_dir called with path = /home/pi/ftp/files/DuetLapse/octopi/192-168-1-8 2023-02-07 10:54:56,959 - Thread-177 - Finished parsing the files directory 2023-02-07 10:54:59,583 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:54:59,584 - gcodeLoop - Getting Status 2023-02-07 10:54:59,586 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:55:02,044 - Thread-178 - !!!!! http call: {} !!!!! 2023-02-07 10:55:02,716 - Thread-185 - !!!!! http call: {'displayStatus': ['true']} !!!!! 2023-02-07 10:55:02,813 - Thread-190 - !!!!! http call: {'getfile': ['/home/pi/ftp/files/DuetLapse/octopi/192-168-1-8/598_1_printer_square_calibration/Camera1_00000088.jpeg']} !!!!! 2023-02-07 10:55:02,814 - Thread-190 - Trying to get file /home/pi/ftp/files/DuetLapse/octopi/192-168-1-8/598_1_printer_square_calibration/Camera1_00000088.jpeg 2023-02-07 10:55:02,815 - Thread-190 - image/jpeg 2023-02-07 10:55:04,509 - Thread-191 - !!!!! http call: {'displayFiles': ['true']} !!!!! 2023-02-07 10:55:04,509 - Thread-191 - list_dir called with path = /home/pi/ftp/files/DuetLapse/octopi/192-168-1-8 2023-02-07 10:55:04,532 - Thread-191 - Finished parsing the files directory 2023-02-07 10:55:04,617 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:55:04,617 - gcodeLoop - Getting Status 2023-02-07 10:55:04,620 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:55:09,646 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:55:09,647 - gcodeLoop - Getting Status 2023-02-07 10:55:09,647 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:55:14,694 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:55:14,695 - gcodeLoop - Getting Status 2023-02-07 10:55:14,699 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:55:19,733 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:55:19,734 - gcodeLoop - Getting Status 2023-02-07 10:55:19,735 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:55:24,774 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:55:24,775 - gcodeLoop - Getting Status 2023-02-07 10:55:24,778 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:55:29,812 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:55:29,813 - gcodeLoop - Getting Status 2023-02-07 10:55:29,816 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:55:34,850 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:55:34,851 - gcodeLoop - Getting Status 2023-02-07 10:55:34,853 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:55:39,891 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:55:39,891 - gcodeLoop - Getting Status 2023-02-07 10:55:39,892 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:55:44,919 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:55:44,920 - gcodeLoop - Getting Status 2023-02-07 10:55:44,922 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:55:49,946 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:55:49,946 - gcodeLoop - Getting Status 2023-02-07 10:55:49,949 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:55:54,979 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:55:54,980 - gcodeLoop - Getting Status 2023-02-07 10:55:54,984 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:56:00,016 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:56:00,017 - gcodeLoop - Getting Status 2023-02-07 10:56:00,017 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:56:05,044 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:56:05,045 - gcodeLoop - Getting Status 2023-02-07 10:56:05,048 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:56:10,086 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:56:10,087 - gcodeLoop - Getting Status 2023-02-07 10:56:10,087 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:56:15,118 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:56:15,119 - gcodeLoop - Getting Status 2023-02-07 10:56:15,119 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:56:18,058 - Thread-192 - !!!!! http call: {'displayInfo': ['true']} !!!!! 2023-02-07 10:56:20,155 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:56:20,156 - gcodeLoop - Getting Status 2023-02-07 10:56:20,159 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:56:25,189 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:56:25,189 - gcodeLoop - Getting Status 2023-02-07 10:56:25,192 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:56:30,220 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:56:30,221 - gcodeLoop - Getting Status 2023-02-07 10:56:30,225 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:56:32,165 - Thread-193 - !!!!! http call: {'displayVideo': ['true']} !!!!! 2023-02-07 10:56:35,253 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:56:35,254 - gcodeLoop - Getting Status 2023-02-07 10:56:35,258 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:56:40,299 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:56:40,300 - gcodeLoop - Getting Status 2023-02-07 10:56:40,300 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:56:45,334 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:56:45,335 - gcodeLoop - Getting Status 2023-02-07 10:56:45,335 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:56:50,370 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:56:50,371 - gcodeLoop - Getting Status 2023-02-07 10:56:50,371 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:56:55,397 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:56:55,398 - gcodeLoop - Getting Status 2023-02-07 10:56:55,399 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:57:00,436 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:57:00,437 - gcodeLoop - Getting Status 2023-02-07 10:57:00,437 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:57:05,473 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:57:05,474 - gcodeLoop - Getting Status 2023-02-07 10:57:05,474 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:57:10,504 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:57:10,505 - gcodeLoop - Getting Status 2023-02-07 10:57:10,505 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:57:15,532 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:57:15,533 - gcodeLoop - Getting Status 2023-02-07 10:57:15,537 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:57:20,574 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:57:20,575 - gcodeLoop - Getting Status 2023-02-07 10:57:20,575 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:57:25,615 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:57:25,616 - gcodeLoop - Getting Status 2023-02-07 10:57:25,619 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:57:30,655 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:57:30,656 - gcodeLoop - Getting Status 2023-02-07 10:57:30,659 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:57:35,694 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:57:35,695 - gcodeLoop - Getting Status 2023-02-07 10:57:35,698 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:57:40,734 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:57:40,735 - gcodeLoop - Getting Status 2023-02-07 10:57:40,737 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:57:45,766 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:57:45,767 - gcodeLoop - Getting Status 2023-02-07 10:57:45,767 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:57:50,800 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:57:50,801 - gcodeLoop - Getting Status 2023-02-07 10:57:50,806 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:57:55,844 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:57:55,845 - gcodeLoop - Getting Status 2023-02-07 10:57:55,848 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:58:00,896 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:58:00,900 - gcodeLoop - Getting Status 2023-02-07 10:58:00,901 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:58:05,945 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:58:05,946 - gcodeLoop - Getting Status 2023-02-07 10:58:05,949 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:58:10,976 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:58:10,977 - gcodeLoop - Getting Status 2023-02-07 10:58:10,977 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:58:16,010 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:58:16,010 - gcodeLoop - Getting Status 2023-02-07 10:58:16,015 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:58:21,044 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:58:21,044 - gcodeLoop - Getting Status 2023-02-07 10:58:21,047 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:58:26,076 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:58:26,076 - gcodeLoop - Getting Status 2023-02-07 10:58:26,077 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:58:31,111 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:58:31,112 - gcodeLoop - Getting Status 2023-02-07 10:58:31,116 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:58:36,157 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:58:36,158 - gcodeLoop - Getting Status 2023-02-07 10:58:36,161 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:58:41,190 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:58:41,191 - gcodeLoop - Getting Status 2023-02-07 10:58:41,194 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:58:46,231 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:58:46,232 - gcodeLoop - Getting Status 2023-02-07 10:58:46,234 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:58:51,317 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:58:51,318 - gcodeLoop - Getting Status 2023-02-07 10:58:51,321 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:58:56,354 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:58:56,355 - gcodeLoop - Getting Status 2023-02-07 10:58:56,355 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:59:01,390 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:59:01,391 - gcodeLoop - Getting Status 2023-02-07 10:59:01,396 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:59:06,432 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:59:06,432 - gcodeLoop - Getting Status 2023-02-07 10:59:06,434 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:59:11,476 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:59:11,477 - gcodeLoop - Getting Status 2023-02-07 10:59:11,478 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:59:16,519 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:59:16,520 - gcodeLoop - Getting Status 2023-02-07 10:59:16,520 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:59:21,556 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:59:21,557 - gcodeLoop - Getting Status 2023-02-07 10:59:21,559 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:59:26,600 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:59:26,601 - gcodeLoop - Getting Status 2023-02-07 10:59:26,601 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:59:31,638 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:59:31,640 - gcodeLoop - Getting Status 2023-02-07 10:59:31,643 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:59:36,680 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:59:36,681 - gcodeLoop - Getting Status 2023-02-07 10:59:36,681 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:59:41,717 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:59:41,718 - gcodeLoop - Getting Status 2023-02-07 10:59:41,718 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:59:46,756 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:59:46,757 - gcodeLoop - Getting Status 2023-02-07 10:59:46,762 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:59:51,793 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:59:51,794 - gcodeLoop - Getting Status 2023-02-07 10:59:51,797 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 10:59:56,834 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 10:59:56,835 - gcodeLoop - Getting Status 2023-02-07 10:59:56,838 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 11:00:01,873 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 11:00:01,874 - gcodeLoop - Getting Status 2023-02-07 11:00:01,875 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 11:00:06,913 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 11:00:06,914 - gcodeLoop - Getting Status 2023-02-07 11:00:06,919 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 11:00:11,953 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 11:00:11,953 - gcodeLoop - Getting Status 2023-02-07 11:00:11,956 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 11:00:16,982 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 11:00:16,983 - gcodeLoop - Getting Status 2023-02-07 11:00:16,986 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 11:00:22,021 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 11:00:22,022 - gcodeLoop - Getting Status 2023-02-07 11:00:22,023 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 11:00:27,055 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 11:00:27,056 - gcodeLoop - Getting Status 2023-02-07 11:00:27,058 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 11:00:32,086 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 11:00:32,087 - gcodeLoop - Getting Status 2023-02-07 11:00:32,087 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 11:00:37,125 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 11:00:37,127 - gcodeLoop - Getting Status 2023-02-07 11:00:37,128 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 11:00:42,165 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 11:00:42,166 - gcodeLoop - Getting Status 2023-02-07 11:00:42,169 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 11:00:47,196 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 11:00:47,197 - gcodeLoop - Getting Status 2023-02-07 11:00:47,200 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 11:00:52,238 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 11:00:52,239 - gcodeLoop - Getting Status 2023-02-07 11:00:52,249 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 11:00:57,278 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 11:00:57,279 - gcodeLoop - Getting Status 2023-02-07 11:00:57,282 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 11:01:02,316 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 11:01:02,317 - gcodeLoop - Getting Status 2023-02-07 11:01:02,317 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 11:01:07,353 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 11:01:07,354 - gcodeLoop - Getting Status 2023-02-07 11:01:07,354 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 11:01:12,382 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 11:01:12,383 - gcodeLoop - Getting Status 2023-02-07 11:01:12,385 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 11:01:17,412 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 11:01:17,413 - gcodeLoop - Getting Status 2023-02-07 11:01:17,416 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 11:01:22,454 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 11:01:22,455 - gcodeLoop - Getting Status 2023-02-07 11:01:22,459 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 11:01:27,493 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 11:01:27,494 - gcodeLoop - Getting Status 2023-02-07 11:01:27,495 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 11:01:32,534 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 11:01:32,535 - gcodeLoop - Getting Status 2023-02-07 11:01:32,535 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 11:01:37,565 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 11:01:37,566 - gcodeLoop - Getting Status 2023-02-07 11:01:37,570 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 11:01:42,605 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 11:01:42,606 - gcodeLoop - Getting Status 2023-02-07 11:01:42,608 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 11:01:47,641 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 11:01:47,642 - gcodeLoop - Getting Status 2023-02-07 11:01:47,642 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 11:01:52,666 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 11:01:52,667 - gcodeLoop - Getting Status 2023-02-07 11:01:52,667 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 11:01:57,694 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 11:01:57,695 - gcodeLoop - Getting Status 2023-02-07 11:01:57,695 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 11:02:02,727 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 11:02:02,728 - gcodeLoop - Getting Status 2023-02-07 11:02:02,731 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 11:02:07,767 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 11:02:07,769 - gcodeLoop - Getting Status 2023-02-07 11:02:07,772 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 11:02:12,806 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 11:02:12,807 - gcodeLoop - Getting Status 2023-02-07 11:02:12,810 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 11:02:17,845 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 11:02:17,846 - gcodeLoop - Getting Status 2023-02-07 11:02:17,849 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 11:02:22,876 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 11:02:22,877 - gcodeLoop - Getting Status 2023-02-07 11:02:22,880 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 11:02:27,916 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 11:02:27,916 - gcodeLoop - Getting Status 2023-02-07 11:02:27,917 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 11:02:32,956 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 11:02:32,957 - gcodeLoop - Getting Status 2023-02-07 11:02:32,957 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 11:02:37,981 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 11:02:37,982 - gcodeLoop - Getting Status 2023-02-07 11:02:37,983 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 11:02:43,012 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 11:02:43,013 - gcodeLoop - Getting Status 2023-02-07 11:02:43,021 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 11:02:48,056 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 11:02:48,056 - gcodeLoop - Getting Status 2023-02-07 11:02:48,059 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 11:02:53,084 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 11:02:53,085 - gcodeLoop - Getting Status 2023-02-07 11:02:53,088 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 11:02:58,119 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 11:02:58,120 - gcodeLoop - Getting Status 2023-02-07 11:02:58,123 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 11:03:00,856 - Thread-194 - !!!!! http call: {'displayInfo': ['true']} !!!!! 2023-02-07 11:03:03,174 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 11:03:03,175 - gcodeLoop - Getting Status 2023-02-07 11:03:03,178 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 11:03:08,216 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 11:03:08,217 - gcodeLoop - Getting Status 2023-02-07 11:03:08,217 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 11:03:13,248 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 11:03:13,248 - gcodeLoop - Getting Status 2023-02-07 11:03:13,249 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 11:03:18,282 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 11:03:18,283 - gcodeLoop - Getting Status 2023-02-07 11:03:18,284 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 11:03:23,313 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 11:03:23,314 - gcodeLoop - Getting Status 2023-02-07 11:03:23,317 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 11:03:28,348 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 11:03:28,349 - gcodeLoop - Getting Status 2023-02-07 11:03:28,352 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 11:03:33,384 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 11:03:33,385 - gcodeLoop - Getting Status 2023-02-07 11:03:33,387 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 11:03:38,422 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 11:03:38,422 - gcodeLoop - Getting Status 2023-02-07 11:03:38,422 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 11:03:43,455 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 11:03:43,456 - gcodeLoop - Getting Status 2023-02-07 11:03:43,462 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 11:03:48,496 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 11:03:48,496 - gcodeLoop - Getting Status 2023-02-07 11:03:48,500 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 11:03:53,526 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 11:03:53,527 - gcodeLoop - Getting Status 2023-02-07 11:03:53,529 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 11:03:58,556 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 11:03:58,557 - gcodeLoop - Getting Status 2023-02-07 11:03:58,559 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 11:04:03,588 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 11:04:03,589 - gcodeLoop - Getting Status 2023-02-07 11:04:03,593 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 11:04:08,629 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 11:04:08,630 - gcodeLoop - Getting Status 2023-02-07 11:04:08,632 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 11:04:13,667 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 11:04:13,668 - gcodeLoop - Getting Status 2023-02-07 11:04:13,669 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 11:04:18,761 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 11:04:18,762 - gcodeLoop - Getting Status 2023-02-07 11:04:18,767 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 11:04:23,806 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 11:04:23,807 - gcodeLoop - Getting Status 2023-02-07 11:04:23,810 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 11:04:28,847 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 11:04:28,848 - gcodeLoop - Getting Status 2023-02-07 11:04:28,848 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 11:04:33,876 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 11:04:33,877 - gcodeLoop - Getting Status 2023-02-07 11:04:33,878 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 11:04:38,911 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 11:04:38,913 - gcodeLoop - Getting Status 2023-02-07 11:04:38,913 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 11:04:43,950 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 11:04:43,950 - gcodeLoop - Getting Status 2023-02-07 11:04:43,951 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 11:04:48,978 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 11:04:48,980 - gcodeLoop - Getting Status 2023-02-07 11:04:48,982 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 11:04:54,016 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 11:04:54,017 - gcodeLoop - Getting Status 2023-02-07 11:04:54,020 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 11:04:59,051 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 11:04:59,052 - gcodeLoop - Getting Status 2023-02-07 11:04:59,055 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 11:05:04,101 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 11:05:04,102 - gcodeLoop - Getting Status 2023-02-07 11:05:04,104 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 11:05:09,134 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 11:05:09,135 - gcodeLoop - Getting Status 2023-02-07 11:05:09,135 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 11:05:14,156 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 11:05:14,157 - gcodeLoop - Getting Status 2023-02-07 11:05:14,165 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 11:05:19,205 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 11:05:19,206 - gcodeLoop - Getting Status 2023-02-07 11:05:19,209 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 11:05:24,246 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 11:05:24,247 - gcodeLoop - Getting Status 2023-02-07 11:05:24,249 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 11:05:29,275 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 11:05:29,276 - gcodeLoop - Getting Status 2023-02-07 11:05:29,280 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 11:05:34,314 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 11:05:34,315 - gcodeLoop - Getting Status 2023-02-07 11:05:34,320 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 11:05:39,358 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 11:05:39,359 - gcodeLoop - Getting Status 2023-02-07 11:05:39,362 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 11:05:39,384 - gcodeLoop - Cannot connect to the printer 2023-02-07 11:05:39,385 - gcodeLoop - ('Connection aborted.', ConnectionResetError(104, 'Connection reset by peer')) 2023-02-07 11:05:39,387 - gcodeLoop - !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! 2023-02-07 11:05:45,419 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 11:05:45,420 - gcodeLoop - Getting Status 2023-02-07 11:05:45,420 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 11:05:50,456 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 11:05:50,456 - gcodeLoop - Getting Status 2023-02-07 11:05:50,457 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 11:05:55,486 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 11:05:55,487 - gcodeLoop - Getting Status 2023-02-07 11:05:55,491 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 11:06:00,535 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 11:06:00,536 - gcodeLoop - Getting Status 2023-02-07 11:06:00,540 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 11:06:05,566 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 11:06:05,567 - gcodeLoop - Getting Status 2023-02-07 11:06:05,568 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 11:06:10,606 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 11:06:10,606 - gcodeLoop - Getting Status 2023-02-07 11:06:10,609 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 11:06:15,638 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 11:06:15,639 - gcodeLoop - Getting Status 2023-02-07 11:06:15,642 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 11:06:18,656 - gcodeLoop - Cannot connect to the printer 2023-02-07 11:06:18,656 - gcodeLoop - HTTPConnectionPool(host='192.168.1.8', port=80): Max retries exceeded with url: /rr_model?key=state (Caused by ConnectTimeoutError(, 'Connection to 192.168.1.8 timed out. (connect timeout=3)')) 2023-02-07 11:06:18,657 - gcodeLoop - !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! 2023-02-07 11:06:22,669 - gcodeLoop - Cannot connect to the printer 2023-02-07 11:06:22,670 - gcodeLoop - HTTPConnectionPool(host='192.168.1.8', port=80): Max retries exceeded with url: /rr_model?key=state (Caused by ConnectTimeoutError(, 'Connection to 192.168.1.8 timed out. (connect timeout=3)')) 2023-02-07 11:06:22,671 - gcodeLoop - !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! 2023-02-07 11:06:23,673 - gcodeLoop - Number of disconnects 1 2023-02-07 11:06:24,675 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 11:06:24,676 - gcodeLoop - Getting Status 2023-02-07 11:06:24,676 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 11:06:29,837 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 11:06:29,837 - gcodeLoop - Getting Status 2023-02-07 11:06:29,838 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 11:06:34,866 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 11:06:34,866 - gcodeLoop - Getting Status 2023-02-07 11:06:34,867 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 11:06:39,894 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 11:06:39,894 - gcodeLoop - Getting Status 2023-02-07 11:06:39,895 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 11:06:44,919 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 11:06:44,920 - gcodeLoop - Getting Status 2023-02-07 11:06:44,924 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 11:06:49,958 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 11:06:49,958 - gcodeLoop - Getting Status 2023-02-07 11:06:49,959 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 11:06:54,983 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 11:06:54,984 - gcodeLoop - Getting Status 2023-02-07 11:06:54,987 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 11:07:00,022 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 11:07:00,023 - gcodeLoop - Getting Status 2023-02-07 11:07:00,023 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 11:07:05,054 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 11:07:05,054 - gcodeLoop - Getting Status 2023-02-07 11:07:05,058 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 11:07:10,087 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 11:07:10,088 - gcodeLoop - Getting Status 2023-02-07 11:07:10,090 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 11:07:15,125 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 11:07:15,126 - gcodeLoop - Getting Status 2023-02-07 11:07:15,126 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 11:07:20,156 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 11:07:20,156 - gcodeLoop - Getting Status 2023-02-07 11:07:20,159 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 11:07:25,184 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 11:07:25,185 - gcodeLoop - Getting Status 2023-02-07 11:07:25,185 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 11:07:30,222 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 11:07:30,223 - gcodeLoop - Getting Status 2023-02-07 11:07:30,223 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 11:07:35,250 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 11:07:35,251 - gcodeLoop - Getting Status 2023-02-07 11:07:35,254 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 11:07:40,294 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 11:07:40,294 - gcodeLoop - Getting Status 2023-02-07 11:07:40,297 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 11:07:45,335 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 11:07:45,336 - gcodeLoop - Getting Status 2023-02-07 11:07:45,336 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False 2023-02-07 11:07:50,359 - gcodeLoop - Calling function Status from gcodelistener with rr_model 2023-02-07 11:07:50,360 - gcodeLoop - Getting Status 2023-02-07 11:07:50,363 - gcodeLoop - url: http://192.168.1.8/rr_model?key=state post: False