Connection to 192.168.1.7 23 port [tcp/telnet] succeeded!
M122
=== Diagnostics ===
RepRapFirmware for Duet 2 WiFi/Ethernet version 3.3 (2021-06-15 21:44:54) running on Duet WiFi 1.02 or later
Board ID: 08DLM-996RU-N85T0-6JTD6-3S86R-KASBN
Used output buffers: 2 of 24 (24 max)
=== RTOS ===
Static ram: 23876
Dynamic ram: 74184 of which 320 recycled
Never used RAM 13180, free system stack 114 words
Tasks: NETWORK(ready,816.7%,231) HEAT(delaying,0.4%,385) Move(notifyWait,87.3%,303) MAIN(running,336.6%,420) IDLE(ready,22.2%,29), total 1263.1%
Owned mutexes:
=== Platform ===
Last reset 633:22:51 ago, cause: software
Last software reset at 2022-12-09 07:38, reason: User, GCodes spinning, available RAM 13180, slot 0
Software reset code 0x0003 HFSR 0x00000000 CFSR 0x00000000 ICSR 0x0041f000 BFAR 0xe000ed38 SP 0x00000000 Task MAIN Freestk 0 n/a
Error status: 0x14
Step timer max interval 0
MCU temperature: min 19.0, current 23.4, max 23.9
Supply voltage: min 11.6, current 11.7, max 11.8, under voltage events: 0, over voltage events: 0, power good: yes
Heap OK, handles allocated/used 99/0, heap memory allocated/used/recyclable 2048/4/4, gc cycles 0
Driver 0: position 40249, standstill, SG min/max not available
Driver 1: position 52065, standstill, SG min/max not available
Driver 2: position 5264, standstill, SG min/max not available
Driver 3: position 0, standstill, SG min/max not available
Driver 4: position 0, standstill, SG min/max not available
Driver 5: position 0
Driver 6: position 0
Driver 7: position 0
Driver 8: position 0
Driver 9: position 0
Driver 10: position 0
Driver 11: position 0
Date/time: 2023-01-04 17:03:27
Cache data hit count 4294967295
Slowest loop: 213.35ms; fastest: 0.07ms
I2C nak errors 0, send timeouts 0, receive timeouts 0, finishTimeouts 0, resets 0
=== Storage ===
Free file entries: 9
SD card 0 detected, interface speed: 20.0MBytes/sec
SD card longest read time 5.0ms, write time 149.4ms, max retries 0
=== Move ===
DMs created 83, maxWait 353392ms, bed compensation in use: none, comp offset 0.000
=== MainDDARing ===
Scheduled moves 8093, completed moves 8064, hiccups 0, stepErrors 0, LaErrors 0, Underruns [65666, 0, 0], CDDA state 3
=== AuxDDARing ===
Scheduled moves 0, completed moves 0, hiccups 0, stepErrors 0, LaErrors 0, Underruns [0, 0, 0], CDDA state -1
=== Heat ===
Bed heaters = -1 -1 -1 -1, chamberHeaters = -1 -1 -1 -1
=== GCodes ===
Segments left: 1
Movement lock held by null
HTTP is idle in state(s) 0
Telnet is idle in state(s) 0
File is doing "G0 Z110 F15000" in state(s) 0
USB is idle in state(s) 0
Aux is idle in state(s) 0
Trigger is idle in state(s) 0
Queue is idle in state(s) 0
LCD is idle in state(s) 0
Daemon is idle in state(s) 0
Autopause is idle in state(s) 0
Code queue is empty.
=== Network ===
Slowest loop: 963.98ms; fastest: 0.09ms
Responder states: HTTP(0) HTTP(0) HTTP(0) HTTP(0) FTP(0) Telnet(2), 1 sessions
HTTP sessions: 1 of 8
- WiFi -
Network state is active
WiFi module is connected to access point
Failed messages: pending 0, notready 0, noresp 3
WiFi firmware version 1.23
WiFi MAC address 84:0d:8e:b2:ef:91
WiFi Vcc 3.39, reset reason Turned on by main processor
WiFi flash size 4194304, free heap 23368
WiFi IP address 192.168.1.7
WiFi signal strength -53dBm, mode none, reconnections 2, sleep mode modem
Clock register ffffffff
Socket states: 2 0 0 0 0 0 0 0