GCode 1:

;FLAVOR:RepRap
;TIME:11824
;Filament used: 13.8282m
;Layer height: 0.2
;MINX:54.706
;MINY:79.204
;MINZ:0.2
;MAXX:160.299
;MAXY:184.798
;MAXZ:13
;Generated with Cura_SteamEngine 5.2.1
T0
M190 S70
M104 S235
M109 S235
M82 ;absolute extrusion mode
G28 ;Home
G1 Z15.0 F6000 ;Move the platform down 15mm
;Prime the extruder
G92 E0
G1 F200 E3
G92 E0
M83 ;relative extrusion mode
G1 F1500 E-6.5
;LAYER_COUNT:65
;LAYER:0
M107
G0 F2700 X71.704 Y93.187 Z0.2
;TYPE:SKIRT
G1 F1500 E6.5
G1 F1800 X73.025 Y92.009 E0.05887
G1 X74.184 Y91.039 E0.05027



####################################################################

GCode 2:

;Generated with Cura_SteamEngine 15.01
; Default start code
G28 ; Home extruder
G1 Z15 F140
M107 ; Turn off fan
G90 ; Absolute positioning
M82 ; Extruder in absolute mode
M190 S70
; Activate all used extruder
M104 T0 S205
G92 E0 ; Reset extruder position
; Wait for all used extruders to reach temperature
M109 T0 S205
;Layer count: 250
;LAYER:0
M106 S178
G0 F4800 X106.987 Y63.987 Z0.400
;TYPE:SKIRT
G1 F1320 X107.758 Y62.755 E0.14502
G1 X108.587 Y61.552 E0.29079
G1 X109.477 Y60.386 E0.43716