M915 X Y S3 R0 F0 ; stall detection
G1 E-3 ; retract filament by 3 mm
{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+30, max_print_height)}{endif} ; Move bed down
G1 X50.0 Y250.0
M84 ; disable motors
M104 S0 ; turn off temperature
M140 S0 ; turn off heatbed
M107 ; turn off layer fan
;; PLAY A TUNE
M300 ;Beep
G4 P1000
M300 S440 P400
G4 P500
M300 S660 P500
G4 P500
M300 S880 P600