21/05/2022, 06:18:44	Height map saved to file 0:/sys/Map5.csv
21/05/2022, 06:18:44	36 points probed, min error 0.058, max error 3.950, mean 2.510, deviation 0.970
Height map saved to file 0:/sys/heightmap.csv
21/05/2022, 06:18:44	Warning: the height map has a substantial Z offset. Suggest use Z-probe to establish Z=0 datum, then re-probe the mesh.
21/05/2022, 06:14:42	Leadscrew adjustments made: -0.217 -1.363 -5.375 6.320, points used 4, (mean, deviation) before (-0.019, 2.231) after (-0.000, 0.000)
21/05/2022, 06:14:02	Height map saved to file 0:/sys/Map4.csv
21/05/2022, 06:14:02	Error: Z probe readings not consistent
21/05/2022, 06:10:48	Error: Some computed corrections exceed configured limit of 10.00mm: 15.160 -15.674 -10.430 -0.810
21/05/2022, 06:09:59	Height map saved to file 0:/sys/Map3.csv
21/05/2022, 06:09:59	36 points probed, min error 3.345, max error 7.445, mean 5.914, deviation 1.035
Height map saved to file 0:/sys/heightmap.csv
21/05/2022, 06:09:59	Warning: the height map has a substantial Z offset. Suggest use Z-probe to establish Z=0 datum, then re-probe the mesh.
21/05/2022, 06:06:32	Error: Some computed corrections exceed configured limit of 10.00mm: -1.389 -2.256 -5.082 11.787
21/05/2022, 06:05:54	Height map saved to file 0:/sys/Map2.csv
21/05/2022, 06:05:54	36 points probed, min error -3.554, max error 0.529, mean -0.986, deviation 1.033
Height map saved to file 0:/sys/heightmap.csv
21/05/2022, 06:01:27	Leadscrew adjustments made: -0.823 -2.072 6.305 -0.412, points used 4, (mean, deviation) before (0.690, 1.699) after (0.000, 0.000)
21/05/2022, 06:00:48	Height map saved to file 0:/sys/Map1.csv
21/05/2022, 06:00:48	36 points probed, min error -1.896, max error 0.058, mean -0.653, deviation 0.523
Height map saved to file 0:/sys/heightmap.csv
21/05/2022, 05:56:08	Leadscrew adjustments made: -2.093 3.209 -0.181 -0.942, points used 4, (mean, deviation) before (-0.067, 1.060) after (-0.000, 0.000)
21/05/2022, 05:54:59	Connection established