M122
=== Diagnostics ===
RepRapFirmware for Duet 2 WiFi/Ethernet version 3.4.0rc2 (2022-02-22 17:06:53) running on Duet WiFi 1.02 or later
Board ID: 08DLM-996RU-N8PS4-6J9D6-3S46M-9UV3P
Used output buffers: 3 of 24 (12 max)
=== RTOS ===
Static ram: 23852
Dynamic ram: 73404 of which 12 recycled
Never used RAM 11956, free system stack 206 words
Tasks: NETWORK(ready,13.4%,248) HEAT(notifyWait,0.0%,387) Move(notifyWait,0.0%,364) MAIN(running,86.3%,534) IDLE(ready,0.3%,30), total 100.0%
Owned mutexes: WiFi(NETWORK)
=== Platform ===
Last reset 00:10:54 ago, cause: software
Last software reset at 2022-02-11 20:16, reason: User, GCodes spinning, available RAM 11956, slot 1
Software reset code 0x0003 HFSR 0x00000000 CFSR 0x00000000 ICSR 0x00400000 BFAR 0xe000ed38 SP 0x00000000 Task MAIN Freestk 0 n/a
Error status: 0x00
Step timer max interval 0
MCU temperature: min 30.4, current 31.2, max 31.5
Supply voltage: min 0.4, current 0.6, max 0.8, under voltage events: 0, over voltage events: 0, power good: no
Heap OK, handles allocated/used 99/5, heap memory allocated/used/recyclable 2048/310/244, gc cycles 0
Events: 0 queued, 0 completed
Driver 0: pos 0, ok, SG min n/a
Driver 1: pos 0, ok, SG min n/a
Driver 2: pos 0, ok, SG min n/a
Driver 3: pos 0, ok, SG min n/a
Driver 4: pos 0, ok, SG min n/a
Driver 5: pos 0
Driver 6: pos 0
Driver 7: pos 0
Driver 8: pos 0
Driver 9: pos 0
Driver 10: pos 0
Driver 11: pos 0
Date/time: 2022-02-26 07:59:46
Cache data hit count 4294967295
Slowest loop: 22.96ms; fastest: 0.14ms
I2C nak errors 0, send timeouts 0, receive timeouts 0, finishTimeouts 0, resets 0
=== Storage ===
Free file entries: 10
SD card 0 detected, interface speed: 20.0MBytes/sec
SD card longest read time 4.5ms, write time 139.5ms, max retries 0
=== Move ===
DMs created 83, segments created 0, maxWait 0ms, bed compensation in use: none, comp offset 0.000
=== MainDDARing ===
Scheduled moves 0, completed 0, hiccups 0, stepErrors 0, LaErrors 0, Underruns [0, 0, 0], CDDA state -1
=== AuxDDARing ===
Scheduled moves 0, completed 0, hiccups 0, stepErrors 0, LaErrors 0, Underruns [0, 0, 0], CDDA state -1
=== Heat ===
Bed heaters -1 -1 -1 -1, chamber heaters -1 -1 -1 -1, ordering errs 0
=== GCodes ===
Segments left: 0
Movement lock held by null
HTTP is idle in state(s) 0
Telnet is idle in state(s) 0
File is idle in state(s) 0
USB is idle in state(s) 0
Aux is idle in state(s) 0
Trigger is idle in state(s) 0
Queue is idle in state(s) 0
LCD is idle in state(s) 0
Daemon is idle in state(s) 0
Autopause is idle in state(s) 0
Code queue is empty
=== Network ===
Slowest loop: 141.83ms; fastest: 0.00ms
Responder states: HTTP(2) HTTP(0) HTTP(0) HTTP(0) FTP(0) Telnet(0), 0 sessions
HTTP sessions: 1 of 8
- WiFi -
Network state is active
WiFi module is connected to access point 
Failed messages: pending 0, notready 0, noresp 0
WiFi firmware version 1.26
WiFi MAC address ec:fa:bc:5b:42:59
WiFi Vcc 3.33, reset reason Turned on by main processor
WiFi flash size 4194304, free heap 25520
WiFi IP address 192.168.0.58
WiFi signal strength -76dBm, mode 802.11n, reconnections 0, sleep mode modem
Clock register 00002002
Socket states: 0 4 0 0 0 0 0 0