; homez.g
; called to home the Z axis
;
; generated by RepRapFirmware Configuration Tool v3.3.5 on Mon Nov 01 2021 10:47:25 GMT-0400 (Eastern Daylight Time)
G91               ; relative positioning
;G1 H2 Z1 F6000    ; lift Z relative to current position
G1 H1 Z-805 F1800 ; move Z down until the endstop is triggered
G92 Z0            ; set Z position to axis minimum (you may want to adjust this)

; Uncomment the following lines to lift Z after probing
;G91              ; relative positioning
;G1 Z1 F100       ; lift Z relative to current position
;G90              ; absolute positioning