1/3/2022, 11:04:21 AM	M98 P"config.g"
HTTP is enabled on port 80
FTP is disabled
TELNET is disabled
Axis compensations - XY: 0.00000, YZ: 0.00000, ZX: 0.00000
Error: endstop type 0 is no longer supported. Use type 1 and invert the input pin instead.
Error: Heater 7 not found
Warning: Macro file config-override.g not found
Endstops - X: not stopped, Y: not stopped, Z: not stopped, Z probe: not stopped