11/15/2021, 8:39:14 AM	m122
=== Diagnostics ===
RepRapFirmware for Duet 2 WiFi/Ethernet version 3.4.0beta5+1 (2021-10-28 21:18:12) running on Duet WiFi 1.02 or later + DueX5
Board ID: 08DJM-9178L-L2MS8-6JKDA-3S06M-K8HAP
Used output buffers: 3 of 24 (24 max)
=== RTOS ===
Static ram: 23788
Dynamic ram: 76752 of which 0 recycled
Never used RAM 11180, free system stack 102 words
Tasks: NETWORK(ready,14.6%,228) HEAT(notifyWait,0.0%,327) Move(notifyWait,0.7%,294) DUEX(notifyWait,0.0%,24) MAIN(running,84.6%,460) IDLE(ready,0.0%,30), total 100.0%
Owned mutexes: WiFi(NETWORK)
=== Platform ===
Last reset 00:24:51 ago, cause: power up
Last software reset at 2021-11-14 13:47, reason: User, GCodes spinning, available RAM 11748, slot 1
Software reset code 0x0003 HFSR 0x00000000 CFSR 0x00000000 ICSR 0x0041f000 BFAR 0xe000ed38 SP 0x00000000 Task MAIN Freestk 0 n/a
Error status: 0x04
Aux0 errors 0,0,0
Step timer max interval 0
MCU temperature: min 16.1, current 18.9, max 19.2
Supply voltage: min 23.9, current 24.1, max 24.3, under voltage events: 0, over voltage events: 0, power good: yes
Heap OK, handles allocated/used 0/0, heap memory allocated/used/recyclable 0/0/0, gc cycles 0
Driver 0: pos 10000, standstill, SG min 37
Driver 1: pos 0, standstill, SG min 65
Driver 2: pos 11275, standstill, SG min n/a
Driver 3: pos 0, standstill, SG min 0
Driver 4: pos 0, standstill, SG min n/a
Driver 5: pos 0, standstill, SG min 0
Driver 6: pos 0, standstill, SG min 0
Driver 7: pos 0, standstill, SG min 0
Driver 8: pos 0, standstill, SG min n/a
Driver 9: pos 0, standstill, SG min n/a
Driver 10: pos 0
Driver 11: pos 0
Date/time: 2021-11-15 08:39:13
Cache data hit count 4294967295
Slowest loop: 34.48ms; fastest: 0.09ms
I2C nak errors 0, send timeouts 0, receive timeouts 0, finishTimeouts 0, resets 0
=== Storage ===
Free file entries: 9
SD card 0 detected, interface speed: 20.0MBytes/sec
SD card longest read time 2.9ms, write time 18.9ms, max retries 0
=== Move ===
DMs created 83, segments created 15, maxWait 1256ms, bed compensation in use: none, comp offset 0.000
=== MainDDARing ===
Scheduled moves 3446, completed 3446, hiccups 0, stepErrors 0, LaErrors 0, Underruns [0, 0, 0], CDDA state -1
=== AuxDDARing ===
Scheduled moves 0, completed 0, hiccups 0, stepErrors 0, LaErrors 0, Underruns [0, 0, 0], CDDA state -1
=== Heat ===
Bed heaters 0 -1 -1 -1, chamber heaters -1 -1 -1 -1, ordering errs 0
Heater 0 is on, I-accum = 0.0
Heater 1 is on, I-accum = 0.6
=== GCodes ===
Segments left: 0
Movement lock held by null
HTTP is idle in state(s) 0
Telnet is idle in state(s) 0
File is idle in state(s) 0
USB is idle in state(s) 0
Aux is idle in state(s) 0
Trigger is idle in state(s) 0
Queue is idle in state(s) 0
LCD is idle in state(s) 0
Daemon is idle in state(s) 0
Autopause is idle in state(s) 0
Code queue is empty
=== Filament sensors ===
Extruder 0: pos 357.19, errs: frame 0 parity 0 ovrun 0 pol 0 ovdue 0
=== DueX ===
Read count 0, 0.00 reads/min
=== Network ===
Slowest loop: 201.75ms; fastest: 0.08ms
Responder states: HTTP(0) HTTP(0) HTTP(0) HTTP(0) FTP(0) Telnet(0), 0 sessions
HTTP sessions: 1 of 8
- WiFi -
Network state is active
WiFi module is connected to access point 
Failed messages: pending 0, notready 0, noresp 1
WiFi firmware version 1.26
WiFi MAC address 84:0d:8e:ad:74:86
WiFi Vcc 3.40, reset reason Turned on by main processor
WiFi flash size 4194304, free heap 23160
WiFi IP address 192.168.1.226
WiFi signal strength -41dBm, mode 802.11n, reconnections 0, sleep mode modem
Clock register 00002002
Socket states: 0 0 0 0 0 0 0 0