21/07/2021, 10:20:50
m122
=== Diagnostics ===
RepRapFirmware for Duet 3 MB6HC version 3.3 (2021-06-15 21:45:47) running on Duet 3 MB6HC v0.6 or 1.0 (standalone mode)
Board ID: 08DJM-956BA-NA3TJ-6J1DD-3S86T-KU9AS
Used output buffers: 1 of 40 (15 max)
=== RTOS ===
Static ram: 150904
Dynamic ram: 94264 of which 12 recycled
Never used RAM 109012, free system stack 200 words
Tasks: NETWORK(ready,26.2%,268) ETHERNET(notifyWait,0.1%,124) HEAT(delaying,0.0%,331) Move(notifyWait,0.0%,352) CanReceiv(notifyWait,0.0%,774) CanSender(notifyWait,0.0%,374) CanClock(delaying,0.0%,339) TMC(notifyWait,8.1%,93) MAIN(running,65.4%,1114) IDLE(ready,0.0%,29), total 100.0%
Owned mutexes:
=== Platform ===
Last reset 00:29:37 ago, cause: software
Last software reset at 2021-07-21 09:51, reason: User, GCodes spinning, available RAM 105544, slot 1
Software reset code 0x0003 HFSR 0x00000000 CFSR 0x00000000 ICSR 0x0044a000 BFAR 0x00000000 SP 0x00000000 Task MAIN Freestk 0 n/a
Error status: 0x00
Step timer max interval 136
MCU temperature: min 47.5, current 47.8, max 48.9
Supply voltage: min 24.0, current 24.0, max 24.1, under voltage events: 0, over voltage events: 0, power good: yes
12V rail voltage: min 12.1, current 12.1, max 12.2, under voltage events: 0
Heap OK, handles allocated/used 0/0, heap memory allocated/used/recyclable 0/0/0, gc cycles 0
Driver 0: position 0, standstill, reads 12290, writes 14 timeouts 0, SG min/max 0/0
Driver 1: position 0, standstill, reads 12290, writes 14 timeouts 0, SG min/max 0/0
Driver 2: position 0, standstill, reads 12290, writes 14 timeouts 0, SG min/max 0/0
Driver 3: position 0, standstill, reads 12290, writes 14 timeouts 0, SG min/max 0/0
Driver 4: position 0, standstill, reads 12290, writes 14 timeouts 0, SG min/max 0/0
Driver 5: position 0, standstill, reads 12291, writes 13 timeouts 0, SG min/max 0/0
Date/time: 2021-07-21 10:20:49
Slowest loop: 7.67ms; fastest: 0.05ms
=== Storage ===
Free file entries: 10
SD card 0 detected, interface speed: 25.0MBytes/sec
SD card longest read time 1.2ms, write time 0.0ms, max retries 0
=== Move ===
DMs created 125, maxWait 0ms, bed compensation in use: none, comp offset 0.000
=== MainDDARing ===
Scheduled moves 0, completed moves 0, hiccups 0, stepErrors 0, LaErrors 0, Underruns [0, 0, 0], CDDA state -1
=== AuxDDARing ===
Scheduled moves 0, completed moves 0, hiccups 0, stepErrors 0, LaErrors 0, Underruns [0, 0, 0], CDDA state -1
=== Heat ===
Bed heaters = 2 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1, chamberHeaters = -1 -1 -1 -1
Heater 0 is on, I-accum = 0.0
Heater 2 is on, I-accum = 0.0
=== GCodes ===
Segments left: 0
Movement lock held by null
HTTP is idle in state(s) 0
Telnet is idle in state(s) 0
File is idle in state(s) 0
USB is idle in state(s) 0
Aux is idle in state(s) 0
Trigger is idle in state(s) 0
Queue is idle in state(s) 0
LCD is idle in state(s) 0
SBC is idle in state(s) 0
Daemon is idle in state(s) 0
Aux2 is idle in state(s) 0
Autopause is idle in state(s) 0
Code queue is empty.
=== CAN ===
Messages queued 16029, received 42623, lost 0, longest wait 2ms for reply type 6031, peak Tx sync delay 176, free buffers 49 (min 48), ts 8889/8888/0
Tx timeouts 0,0,0,0,0,0
=== Network ===
Slowest loop: 2.70ms; fastest: 0.02ms
Responder states: HTTP(0) HTTP(0) HTTP(0) HTTP(0) HTTP(0) HTTP(0) FTP(0) Telnet(0), 0 sessions Telnet(0), 0 sessions
HTTP sessions: 1 of 8
- Ethernet -
State: active
Error counts: 0 0 1 0 0
Socket states: 5 2 2 2 2 0 0 0