m122
=== Diagnostics ===
RepRapFirmware for Duet 3 MB6HC version 3.2.2 running on Duet 3 MB6HC v1.01 or later (SBC mode)
Board ID: 08DJM-956L2-G43S4-6J9DL-3S46P-1S42D
Used output buffers: 1 of 40 (11 max)
=== RTOS ===
Static ram: 149788
Dynamic ram: 62216 of which 40 recycled
Never used RAM 146788, free system stack 160 words
Tasks: Linux(ready,95) HEAT(blocked,356) CanReceiv(blocked,927) CanSender(blocked,371) CanClock(blocked,352) TMC(blocked,19) MAIN(running,1118) IDLE(ready,19)
Owned mutexes: HTTP(MAIN)
=== Platform ===
Last reset 15:29:01 ago, cause: power up
Last software reset at 2021-03-25 18:02, reason: User, none spinning, available RAM 146788, slot 1
Software reset code 0x0012 HFSR 0x00000000 CFSR 0x00000000 ICSR 0x00400000 BFAR 0x00000000 SP 0x00000000 Task Linu Freestk 0 n/a
Error status: 0x00
Aux0 errors 0,0,0
Aux1 errors 0,0,0
MCU temperature: min 36.8, current 38.0, max 38.0
Supply voltage: min 23.8, current 23.9, max 24.0, under voltage events: 0, over voltage events: 0, power good: yes
12V rail voltage: min 12.0, current 12.0, max 12.1, under voltage events: 0
Driver 0: position 219904, standstill, reads 13780, writes 2 timeouts 0, SG min/max 0/333
Driver 1: position 50176, standstill, reads 13780, writes 2 timeouts 0, SG min/max 0/350
Driver 2: position 31616, standstill, reads 13780, writes 2 timeouts 0, SG min/max 0/335
Driver 3: position 0, standstill, reads 13779, writes 2 timeouts 0, SG min/max 0/1023
Driver 4: position 0, standstill, reads 13778, writes 3 timeouts 0, SG min/max 0/63
Driver 5: position 0, standstill, reads 13782, writes 0 timeouts 0, SG min/max not available
Date/time: 2021-03-26 09:43:45
Slowest loop: 79.25ms; fastest: 0.04ms
=== Storage ===
Free file entries: 10
SD card 0 not detected, interface speed: 37.5MBytes/sec
SD card longest read time 0.0ms, write time 0.0ms, max retries 0
=== Move ===
DMs created 125, maxWait 496566ms, bed compensation in use: none, comp offset 0.000
=== MainDDARing ===
Scheduled moves 1296, completed moves 1296, hiccups 0, stepErrors 0, LaErrors 0, Underruns [0, 0, 0], CDDA state -1
=== AuxDDARing ===
Scheduled moves 0, completed moves 0, hiccups 0, stepErrors 0, LaErrors 0, Underruns [0, 0, 0], CDDA state -1
=== Heat ===
Bed heaters = -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1, chamberHeaters = -1 -1 -1 -1
=== GCodes ===
Segments left: 0
Movement lock held by null
HTTP* is doing "M122" in state(s) 0
Telnet is idle in state(s) 0
File* is idle in state(s) 0
USB is idle in state(s) 0
Aux is idle in state(s) 0
Trigger* is idle in state(s) 0
Queue* is idle in state(s) 0
LCD is idle in state(s) 0
SBC is idle in state(s) 0
Daemon is idle in state(s) 0
Aux2 is idle in state(s) 0
Autopause is idle in state(s) 0
Code queue is empty.
=== CAN ===
Messages queued 0, send timeouts 2740, received 0, lost 0, longest wait 0ms for reply type 0, free buffers 48
=== SBC interface ===
State: 4, failed transfers: 0
Last transfer: 1ms ago
RX/TX seq numbers: 52485/52485
SPI underruns 0, overruns 0
Number of disconnects: 0, IAP RAM available 0x2c8a8
Buffer RX/TX: 0/0-0
=== Duet Control Server ===
Duet Control Server v3.2.2
Code buffer space: 4096
Configured SPI speed: 8000000 Hz
Full transfers per second: 37.00
Maximum length of RX/TX data transfers: 2644/1588
File /opt/dsf/sd/gcodes/CranialArteries332021.gcode is selected, paused