Connecting to: /dev/ttyACM0 Changing monitoring state from "Offline" to "Opening serial port" Connected to: Serial(port='/dev/ttyACM0', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=10.0, xonxoff=False, rtscts=False, dsrdtr=False), starting monitor Changing monitoring state from "Opening serial port" to "Connecting" Send: N0 M110 N0*125 Recv: Error: Bad command: WiFi module is cN0 M110 N0*125 Changing monitoring state from "Connecting" to "Error: Bad command: WiFi module is cN0 M110 N0*125" Send: M112 Send: N1 M112*32 Send: N2 M104 T0 S0*35 Send: N3 M140 S0*102 Changing monitoring state from "Error: Bad command: WiFi module is cN0 M110 N0*125" to "Offline (Error: Bad command: WiFi module is cN0 M110 N0*125)" Connection closed, closing down monitor Changing monitoring state from "Offline" to "Detecting serial port" Serial port list: ['/dev/ttyACM0'] Connecting to: /dev/ttyACM0 Changing monitoring state from "Detecting serial port" to "Opening serial port" Connected to: Serial(port='/dev/ttyACM0', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=10.0, xonxoff=False, rtscts=False, dsrdtr=False), starting monitor Starting baud rate detection... Changing monitoring state from "Opening serial port" to "Detecting baudrate" Trying baudrate: 115200 Send: N0 M110 N0*125 Recv: ok Changing monitoring state from "Detecting baudrate" to "Operational" Send: N0 M110 N0*125 Recv: ok Send: N1 M115*39 Recv: FIRMWARE_NAME: RepRapFirmware for Duet 2 WiFi/Ethernet FIRMWARE_VERSION: 3.1.1 ELECTRONICS: Duet WiFi 1.02 or later FIRMWARE_DATE: 2020-05-19b2 Recv: ok Send: M21 Recv: SDHC card mounted in slot 0, capacity 3.98Gb Recv: ok Send: M105 Recv: ok T0:25.8 /0.0 B:25.2 /0.0 Send: M105 Recv: ok T0:25.8 /0.0 B:25.2 /0.0 Send: M105 Recv: ok T0:25.8 /0.0 B:25.2 /0.0 Send: M122 Recv: === Diagnostics === Recv: RepRapFirmware for Duet 2 WiFi/Ethernet version 3.1.1 running on Duet WiFi 1.02 or later Recv: Board ID: 08DGM-917NK-F2MS4-7JKD4-3SJ6S-1YUJH Recv: Used output buffers: 1 of 24 (2 max) Recv: === RTOS === Recv: Static ram: 27980 Recv: Dynamic ram: 93232 of which 64 recycled Recv: Exception stack ram used: 272 Recv: Never used ram: 9524 Recv: Tasks: NETWORK(ready,1040) HEAT(suspended,1168) MAIN(running,1848) IDLE(ready,80) Recv: Owned mutexes: WiFi(NETWORK) Recv: === Platform === Recv: Last reset 00:01:15 ago, cause: power up Recv: Last software reset at 2020-07-27 19:49, reason: User, spinning module GCodes, available RAM 9504 bytes (slot 3) Recv: Software reset code 0x0003 HFSR 0x00000000 CFSR 0x00000000 ICSR 0x0441f000 BFAR 0xe000ed38 SP 0xffffffff Task MAIN Recv: Error status: 0 Recv: MCU temperature: min 26.7, current 30.1, max 30.4 Recv: Supply voltage: min 24.1, current 24.2, max 24.3, under voltage events: 0, over voltage events: 0, power good: yes Recv: Driver 0: standstill, SG min/max not available Recv: Driver 1: standstill, SG min/max not available Recv: Driver 2: standstill, SG min/max not available Recv: Driver 3: standstill, SG min/max not available Recv: Driver 4: standstill, SG min/max not available Recv: Date/time: 1970-01-01 00:00:00 Recv: Cache data hit count 130595838 Recv: Slowest loop: 8.27ms; fastest: 0.12ms Recv: I2C nak errors 0, send timeouts 0, receive timeouts 0, finishTimeouts 0, resets 0 Recv: === Storage === Recv: Free file entries: 10 Recv: SD card 0 detected, interface speed: 20.0MBytes/sec Recv: SD card longest read time 0.7ms, write time 0.0ms, max retries 0 Recv: === Move === Recv: Hiccups: 0(0), FreeDm: 169, MinFreeDm: 169, MaxWait: 0ms Recv: Bed compensation in use: none, comp offset 0.000 Recv: === MainDDARing === Recv: Scheduled moves: 0, completed moves: 0, StepErrors: 0, LaErrors: 0, Underruns: 0, 0 CDDA state: -1 Recv: === AuxDDARing === Recv: Scheduled moves: 0, completed moves: 0, StepErrors: 0, LaErrors: 0, Underruns: 0, 0 CDDA state: -1 Recv: === Heat === Recv: Bed heaters = 0 -1 -1 -1, chamberHeaters = -1 -1 -1 -1 Recv: Heater 0 is on, I-accum = 0.0 Recv: === GCodes === Recv: Segments left: 0 Recv: Movement lock held by null Recv: HTTP is idle in state(s) 0 Recv: Telnet is idle in state(s) 0 Recv: File is idle in state(s) 0 Recv: USB is ready with "M122" in state(s) 0 Recv: Aux is idle in state(s) 0 Recv: Trigger is idle in state(s) 0 Recv: Queue is idle in state(s) 0 Recv: Daemon is idle in state(s) 0 Recv: Autopause is idle in state(s) 0 Recv: Code queue is empty. Recv: === Network === Recv: Slowest loop: 16.07ms; fastest: 0.00ms Recv: Responder states: HTTP(0) HTTP(0) HTTP(0) HTTP(0) FTP(0) Telnet(0), 0 sessions Recv: HTTP sessions: 0 of 8 Recv: - WiFi - Recv: Network state is active Recv: WiFi module is connected to access point Recv: Failed messages: pending 0, notready 0, noresp 0 Recv: WiFi firmware version 1.23 Recv: WiFi MAC address b4:e6:2d:53:0d:07 Recv: WiFi Vcc 3.33, reset reason Unknown Recv: WiFi flash size 4194304, free heap 25696 Recv: WiFi IP address 192.168.0.156 Recv: WiFi signal strength -73dBm, reconnections 0, sleep mode modem Recv: Socket states: 0 0 0 0 0 0 0 0 Recv: ok Send: M105 Recv: ok T0:25.8 /0.0 B:25.2 /0.0 Send: M105