pi@starttex:~ $ sudo /opt/dsf/bin/DuetControlServer -l debug
Duet Control Server v1.3.2
Written by Christian Hammacher for Duet3D
Licensed under the terms of the GNU Public License Version 3

[info] Settings loaded
[info] Environment initialized
[info] Connection to Duet established
[info] IPC socket created at /var/run/dsf/dcs.sock
[warn] Daemon: Out-of-order reply: ''
[debug] IPC#2: Got new UNIX connection, checking mode...
[debug] IPC#2: Subscription processor registered in Patch mode
[debug] IPC#3: Got new UNIX connection, checking mode...
[debug] IPC#3: Command processor added
[debug] IPC#3: Received command AddUserSession
[debug] Requesting update of key boards, seq 0 -> 0
[debug] Requesting update of key directories, seq 0 -> 0
[debug] Requesting update of key fans, seq 0 -> 4
[debug] Requesting update of key heat, seq 0 -> 11
[debug] Requesting update of key inputs, seq 0 -> 1
[debug] Requesting update of key job, seq 0 -> 277
[debug] Requesting update of key move, seq 0 -> 17
[debug] Requesting update of key network, seq 0 -> 3
[debug] Requesting update of key sensors, seq 0 -> 2
[debug] Requesting update of key spindles, seq 0 -> 0
[debug] Requesting update of key state, seq 0 -> 23
[debug] Requesting update of key tools, seq 0 -> 5
[debug] Requesting update of key volumes, seq 0 -> 0
[debug] Updated key boards
[debug] Updated key directories
[debug] Updated key fans
[debug] Updated key heat
[debug] IPC#4: Got new UNIX connection, checking mode...
[debug] IPC#5: Got new UNIX connection, checking mode...
[debug] IPC#4: Command processor added
[debug] IPC#5: Command processor added
[debug] IPC#4: Received command ResolvePath
[debug] IPC#5: Received command ResolvePath
[debug] Updated key inputs
[debug] IPC#6: Got new UNIX connection, checking mode...
[debug] IPC#6: Command processor added
[debug] IPC#5: Connection closed
[debug] IPC#6: Received command ResolvePath
[debug] IPC#4: Connection closed
[debug] IPC#6: Connection closed
[debug] Updated key job
[debug] Updated key move
[debug] Updated key network
[debug] Updated key sensors
[debug] Updated key spindles
[debug] Updated key state
[debug] Updated key tools
[debug] Updated key volumes
[debug] IPC#7: Got new UNIX connection, checking mode...
[debug] IPC#7: Subscription processor registered in Patch mode
[debug] IPC#8: Got new UNIX connection, checking mode...
[debug] IPC#8: Command processor added
[debug] IPC#8: Received command ResolvePath
[debug] IPC#9: Got new UNIX connection, checking mode...
[debug] IPC#9: Command processor added
[debug] IPC#9: Received command ResolvePath
[debug] IPC#9: Connection closed
[debug] IPC#10: Got new UNIX connection, checking mode...
[debug] IPC#10: Command processor added
[debug] IPC#10: Received command SimpleCode
[debug] Waiting for execution of M701 S"Filamentum PLA Extrafill"
[debug] Waiting for execution of M703
[debug] Processing M701 S"Filamentum PLA Extrafill"
[debug] Processing M703
[debug] HTTP: Sent M701 S"Filamentum PLA Extrafill", remaining space 1480, needed 56
[info] Starting macro file load.g on channel HTTP
[debug] Waiting for execution of M98 P"0:/macros/Filaments/PLA/Load" (macro code)
[debug] Processing M98 P"0:/macros/Filaments/PLA/Load"
[debug] HTTP: Sent M98 P"0:/macros/Filaments/PLA/Load", remaining space 1476, needed 60
[info] Starting macro file Load on channel HTTP
[debug] Waiting for execution of ; Move head (macro code)
[debug] Processing ; Move head
[debug] Waiting for execution of G90 ; absolute positioning (macro code)
[debug] Waiting for execution of G28 (macro code)
[debug] Processing G90 ; absolute positioning
[debug] Waiting for execution of G1 X60 Y60 Z100 F9000 (macro code)
[debug] Waiting for execution of ; Display message (macro code)
[debug] Waiting for execution of M291 P"Please wait while the nozzle is being heated up..." R"Loading PLA" S1 ;T5 (macro code)
[debug] Waiting for execution of G10 S200 ; Set current tool temperature to 200C (macro code)
[debug] Waiting for execution of M116 ; Wait for the temperatures to be reached (macro code)
[debug] Waiting for execution of M292 P0 ; cancel message (macro code)
[debug] Waiting for execution of ; Display new message (macro code)
[debug] Waiting for execution of ;M291 P"Ready to feed filament. Insert filament and press Ok." R"Loading PLA" S2 (macro code)
[debug] Completed ; Move head
[debug] Waiting for execution of M291 P"Ready to feed filament. Insert filament and press function button." R"Loading PLA" S1 (macro code)
[debug] Waiting for execution of M577 P1 S0 ; pause and wait for endstop trigger (macro code)
[debug] Waiting for execution of M400 ; wait for all moves to finish (macro code)
[debug] Waiting for execution of M577 P1 S0 ; pause and wait for endstop trigger (macro code)
[debug] Waiting for execution of M400 ; wait for all moves to finish (macro code)
[debug] Waiting for execution of M292 P0 ; cancel message (macro code)
[debug] Processing G28
[debug] Processing G1 X60 Y60 Z100 F9000
[debug] Processing ; Display message
[debug] Completed ; Display message
[debug] Processing M291 P"Please wait while the nozzle is being heated up..." R"Loading PLA" S1 ;T5
[debug] Processing G10 S200 ; Set current tool temperature to 200C
[debug] Processing M116 ; Wait for the temperatures to be reached
[debug] Processing M292 P0 ; cancel message
[debug] Processing ; Display new message
[debug] Completed ; Display new message
[debug] Processing ;M291 P"Ready to feed filament. Insert filament and press Ok." R"Loading PLA" S2
[debug] Processing M291 P"Ready to feed filament. Insert filament and press function button." R"Loading PLA" S1
[debug] Completed ;M291 P"Ready to feed filament. Insert filament and press Ok." R"Loading PLA" S2
[debug] Processing M577 P1 S0 ; pause and wait for endstop trigger
[debug] Processing M400 ; wait for all moves to finish
[debug] Processing M577 P1 S0 ; pause and wait for endstop trigger
[debug] Processing M400 ; wait for all moves to finish
[debug] Processing M292 P0 ; cancel message
[debug] HTTP: Sent G90 ; absolute positioning, remaining space 1512, needed 24
[debug] HTTP: Sent G28, remaining space 1488, needed 24
[debug] Requesting update of key move, seq 17 -> 18
[debug] HTTP: Sent G1 X60 Y60 Z100 F9000, remaining space 1432, needed 56
[debug] HTTP: Sent M291 P"Please wait while the nozzle is being heated up..." R"Loading PLA" S1 ;T5, remaining space 1320, needed 112
[debug] HTTP: Sent G10 S200 ; Set current tool temperature to 200C, remaining space 1288, needed 32
[debug] HTTP: Sent M116 ; Wait for the temperatures to be reached, remaining space 1264, needed 24
[debug] HTTP: Sent M292 P0 ; cancel message, remaining space 1232, needed 32
[debug] HTTP: Sent M291 P"Ready to feed filament. Insert filament and press function button." R"Loading PLA" S1, remaining space 1104, needed 128
[debug] HTTP: Sent M577 P1 S0 ; pause and wait for endstop trigger, remaining space 1064, needed 40
[debug] HTTP: Sent M400 ; wait for all moves to finish, remaining space 1040, needed 24
[debug] HTTP: Sent M577 P1 S0 ; pause and wait for endstop trigger, remaining space 1000, needed 40
[debug] HTTP: Sent M400 ; wait for all moves to finish, remaining space 976, needed 24
[debug] HTTP: Sent M292 P0 ; cancel message, remaining space 944, needed 32
[debug] HTTP: Suspending code G1 X60 Y60 Z100 F9000
[debug] HTTP: Suspending code M291 P"Please wait while the nozzle is being heated up..." R"Loading PLA" S1 ;T5
[debug] HTTP: Suspending code G10 S200 ; Set current tool temperature to 200C
[debug] HTTP: Suspending code M116 ; Wait for the temperatures to be reached
[debug] HTTP: Suspending code M292 P0 ; cancel message
[debug] HTTP: Suspending code M291 P"Ready to feed filament. Insert filament and press function button." R"Loading PLA" S1
[debug] HTTP: Suspending code M577 P1 S0 ; pause and wait for endstop trigger
[debug] HTTP: Suspending code M400 ; wait for all moves to finish
[debug] HTTP: Suspending code M577 P1 S0 ; pause and wait for endstop trigger
[debug] HTTP: Suspending code M400 ; wait for all moves to finish
[debug] HTTP: Suspending code M292 P0 ; cancel message
[info] Starting macro file homeall.g on channel HTTP
[debug] Waiting for execution of M98 P"homez.g" (macro code)
[debug] Waiting for execution of M98 P"homex.g" (macro code)
[debug] Processing M98 P"homez.g"
[debug] Waiting for execution of M98 P"homey.g" (macro code)
[debug] Waiting for execution of G1 Y120 F3000 ; move Y out of the way (macro code)
[debug] Processing M98 P"homex.g"
[debug] Processing M98 P"homey.g"
[debug] Processing G1 Y120 F3000 ; move Y out of the way
[debug] Completed G90 ; absolute positioning
[debug] Waiting for execution of M83 ; relative e steps (macro code)
[debug] Processing M83 ; relative e steps
[debug] HTTP: Sent M98 P"homez.g", remaining space 1496, needed 40
[debug] HTTP: Sent M98 P"homex.g", remaining space 1456, needed 40
[debug] HTTP: Sent M98 P"homey.g", remaining space 1416, needed 40
[debug] HTTP: Sent G1 Y120 F3000 ; move Y out of the way, remaining space 1376, needed 40
[debug] HTTP: Suspending code M98 P"homex.g"
[debug] HTTP: Suspending code M98 P"homey.g"
[debug] HTTP: Suspending code G1 Y120 F3000 ; move Y out of the way
[info] Starting macro file homez.g on channel HTTP
[debug] Waiting for execution of G91 ; relative moves (macro code)
[debug] Processing G91 ; relative moves
[debug] Waiting for execution of G1 H1 Z200 F500 ; try to move Z towards home by 150mm & check for endstop (macro code)
[debug] Processing G1 H1 Z200 F500 ; try to move Z towards home by 150mm & check for endstop
[debug] Waiting for execution of G1 H2 Z-5 F200 ; move Z 5mm away from endstop (macro code)
[debug] Processing G1 H2 Z-5 F200 ; move Z 5mm away from endstop
[debug] Waiting for execution of G1 H1 Z10 S1 ; try to move Z towards home by 10mm & check for endstop (macro code)
[debug] Waiting for execution of G90 ; absolute moves (macro code)
[debug] Processing G1 H1 Z10 S1 ; try to move Z towards home by 10mm & check for endstop
[debug] Processing G90 ; absolute moves
[debug] HTTP: Sent G91 ; relative moves, remaining space 1512, needed 24
[debug] HTTP: Sent G1 H1 Z200 F500 ; try to move Z towards home by 150mm & check for endstop, remaining space 1464, needed 48
[debug] HTTP: Sent G1 H2 Z-5 F200 ; move Z 5mm away from endstop, remaining space 1416, needed 48
[debug] HTTP: Sent G1 H1 Z10 S1 ; try to move Z towards home by 10mm & check for endstop, remaining space 1368, needed 48
[debug] HTTP: Sent G90 ; absolute moves, remaining space 1344, needed 24
[debug] Updated key move
[debug] Completed G91 ; relative moves
[debug] Completed G1 H1 Z200 F500 ; try to move Z towards home by 150mm & check for endstop
[debug] Completed G1 H2 Z-5 F200 ; move Z 5mm away from endstop
[debug] Completed G90 ; absolute moves
[debug] Completed G1 H1 Z10 S1 ; try to move Z towards home by 10mm & check for endstop
[debug] Finished codes from macro file homez.g
[info] HTTP: Finished macro file homez.g
[debug] HTTP: ==> Finished starting code: M98 P"homez.g"
[debug] HTTP: Sent M98 P"homex.g", remaining space 1496, needed 40
[debug] HTTP: -> Resumed suspended code
[debug] HTTP: Sent M98 P"homey.g", remaining space 1456, needed 40
[debug] HTTP: -> Resumed suspended code
[debug] HTTP: Sent G1 Y120 F3000 ; move Y out of the way, remaining space 1416, needed 40
[debug] HTTP: -> Resumed suspended code
[debug] Completed M98 P"homez.g"
[debug] HTTP: Suspending code M98 P"homey.g"
[debug] HTTP: Suspending code G1 Y120 F3000 ; move Y out of the way
[info] Starting macro file homex.g on channel HTTP
[debug] Waiting for execution of G91 ; relative moves (macro code)
[debug] Waiting for execution of G1 H1 X-200 F3000 ; try to move x towards home by 150mm & check for endstop (macro code)
[debug] Waiting for execution of G1 H2 X4 F600 ; move x 4mm away from endstop (macro code)
[debug] Waiting for execution of G1 H1 X-10 ; try to move x towards home by 10mm & check for endstop (macro code)
[debug] Waiting for execution of G90 ; absolute moves (macro code)
[debug] Processing G91 ; relative moves
[debug] Processing G1 H1 X-200 F3000 ; try to move x towards home by 150mm & check for endstop
[debug] Processing G1 H2 X4 F600 ; move x 4mm away from endstop
[debug] Processing G1 H1 X-10 ; try to move x towards home by 10mm & check for endstop
[debug] Processing G90 ; absolute moves
[debug] HTTP: Sent G91 ; relative moves, remaining space 1512, needed 24
[debug] HTTP: Sent G1 H1 X-200 F3000 ; try to move x towards home by 150mm & check for endstop, remaining space 1464, needed 48
[debug] HTTP: Sent G1 H2 X4 F600 ; move x 4mm away from endstop, remaining space 1416, needed 48
[debug] HTTP: Sent G1 H1 X-10 ; try to move x towards home by 10mm & check for endstop, remaining space 1376, needed 40
[debug] HTTP: Sent G90 ; absolute moves, remaining space 1352, needed 24
[debug] Completed G91 ; relative moves
[debug] Completed G1 H1 X-200 F3000 ; try to move x towards home by 150mm & check for endstop
[debug] Completed G1 H2 X4 F600 ; move x 4mm away from endstop
[debug] Completed G1 H1 X-10 ; try to move x towards home by 10mm & check for endstop
[debug] Completed G90 ; absolute moves
[debug] Finished codes from macro file homex.g
[info] HTTP: Finished macro file homex.g
[debug] HTTP: ==> Finished starting code: M98 P"homex.g"
[debug] Completed M98 P"homex.g"
[debug] HTTP: Sent M98 P"homey.g", remaining space 1496, needed 40
[debug] HTTP: -> Resumed suspended code
[debug] HTTP: Sent G1 Y120 F3000 ; move Y out of the way, remaining space 1456, needed 40
[debug] HTTP: -> Resumed suspended code
[debug] HTTP: Suspending code G1 Y120 F3000 ; move Y out of the way
[info] Starting macro file homey.g on channel HTTP
[debug] Waiting for execution of G91 ; relative moves (macro code)
[debug] Processing G91 ; relative moves
[debug] Waiting for execution of G1 H1 Y-200 F3000 ; try to move y towards home by 150mm & check for endstop (macro code)
[debug] Waiting for execution of G1 H2 Y4 F600 ; move y 4mm away from endstop (macro code)
[debug] Waiting for execution of G1 H1 Y-10 ; try to move y towards home by 10mm & check for endstop (macro code)
[debug] Waiting for execution of G90 ; absolute moves (macro code)
[debug] Processing G1 H1 Y-200 F3000 ; try to move y towards home by 150mm & check for endstop
[debug] Processing G1 H2 Y4 F600 ; move y 4mm away from endstop
[debug] Processing G1 H1 Y-10 ; try to move y towards home by 10mm & check for endstop
[debug] Processing G90 ; absolute moves
[debug] HTTP: Sent G91 ; relative moves, remaining space 1512, needed 24
[debug] HTTP: Sent G1 H1 Y-200 F3000 ; try to move y towards home by 150mm & check for endstop, remaining space 1464, needed 48
[debug] HTTP: Sent G1 H2 Y4 F600 ; move y 4mm away from endstop, remaining space 1416, needed 48
[debug] HTTP: Sent G1 H1 Y-10 ; try to move y towards home by 10mm & check for endstop, remaining space 1376, needed 40
[debug] HTTP: Sent G90 ; absolute moves, remaining space 1352, needed 24
[debug] Completed G91 ; relative moves
[debug] Completed G1 H1 Y-200 F3000 ; try to move y towards home by 150mm & check for endstop
[debug] Completed G1 H2 Y4 F600 ; move y 4mm away from endstop
[debug] Completed G1 H1 Y-10 ; try to move y towards home by 10mm & check for endstop
[debug] Completed G90 ; absolute moves
[debug] Finished codes from macro file homey.g
[info] HTTP: Finished macro file homey.g
[debug] HTTP: ==> Finished starting code: M98 P"homey.g"
[debug] HTTP: Sent G1 Y120 F3000 ; move Y out of the way, remaining space 1496, needed 40
[debug] HTTP: -> Resumed suspended code
[debug] Completed M98 P"homey.g"
[debug] Completed G1 Y120 F3000 ; move Y out of the way
[debug] Finished codes from macro file homeall.g
[debug] Completed G28
[debug] Waiting for execution of G92 E0 ; reset e steps (macro code)
[debug] Processing G92 E0 ; reset e steps
[info] HTTP: Finished macro file homeall.g
[debug] HTTP: ==> Finished starting code: G28
[debug] HTTP: Sent G1 X60 Y60 Z100 F9000, remaining space 1480, needed 56
[debug] HTTP: -> Resumed suspended code
[debug] HTTP: Sent M291 P"Please wait while the nozzle is being heated up..." R"Loading PLA" S1 ;T5, remaining space 1368, needed 112
[debug] HTTP: -> Resumed suspended code
[debug] HTTP: Sent G10 S200 ; Set current tool temperature to 200C, remaining space 1336, needed 32
[debug] HTTP: -> Resumed suspended code
[debug] HTTP: Sent M116 ; Wait for the temperatures to be reached, remaining space 1312, needed 24
[debug] HTTP: -> Resumed suspended code
[debug] HTTP: Sent M292 P0 ; cancel message, remaining space 1280, needed 32
[debug] HTTP: -> Resumed suspended code
[debug] HTTP: Sent M291 P"Ready to feed filament. Insert filament and press function button." R"Loading PLA" S1, remaining space 1152, needed 128
[debug] HTTP: -> Resumed suspended code
[debug] HTTP: Sent M577 P1 S0 ; pause and wait for endstop trigger, remaining space 1112, needed 40
[debug] HTTP: -> Resumed suspended code
[debug] HTTP: Sent M400 ; wait for all moves to finish, remaining space 1088, needed 24
[debug] HTTP: -> Resumed suspended code
[debug] HTTP: Sent M577 P1 S0 ; pause and wait for endstop trigger, remaining space 1048, needed 40
[debug] HTTP: -> Resumed suspended code
[debug] HTTP: Sent M400 ; wait for all moves to finish, remaining space 1024, needed 24
[debug] HTTP: -> Resumed suspended code
[debug] HTTP: Sent M292 P0 ; cancel message, remaining space 992, needed 32
[debug] HTTP: -> Resumed suspended code
[debug] HTTP: Sent M83 ; relative e steps, remaining space 968, needed 24
[debug] HTTP: Sent G92 E0 ; reset e steps, remaining space 936, needed 32
[debug] Completed G1 X60 Y60 Z100 F9000
[debug] Waiting for execution of G1 E10 F300 ; Feed 10 mm of filament at 5 mm/s (macro code)
[debug] Processing G1 E10 F300 ; Feed 10 mm of filament at 5 mm/s
[debug] Waiting for execution of G1 E475 F3600 ; Feed 475 mm of filament at 60 mm/s (macro code)
[debug] Processing G1 E475 F3600 ; Feed 475 mm of filament at 60 mm/s
[debug] HTTP: Sent G1 E10 F300 ; Feed 10 mm of filament at 5 mm/s, remaining space 952, needed 40
[debug] HTTP: Sent G1 E475 F3600 ; Feed 475 mm of filament at 60 mm/s, remaining space 912, needed 40
[debug] Completed M291 P"Please wait while the nozzle is being heated up..." R"Loading PLA" S1 ;T5
[debug] Waiting for execution of G1 E20 F300 ; Feed 20mm of filament at 5 mm/s (macro code)
[debug] Completed G10 S200 ; Set current tool temperature to 200C
[debug] Processing G1 E20 F300 ; Feed 20mm of filament at 5 mm/s
[debug] Waiting for execution of G1 E10 F120 ; Feed 10mm of filament at 2 mm/s (macro code)
[debug] Processing G1 E10 F120 ; Feed 10mm of filament at 2 mm/s
[debug] HTTP: Sent G1 E20 F300 ; Feed 20mm of filament at 5 mm/s, remaining space 1016, needed 40
[debug] HTTP: Sent G1 E10 F120 ; Feed 10mm of filament at 2 mm/s, remaining space 976, needed 40
[debug] Requesting update of key state, seq 23 -> 24
[debug] Updated key state
[debug] Requesting update of key state, seq 24 -> 25
[debug] Updated key state
[debug] Completed M116 ; Wait for the temperatures to be reached
[debug] Waiting for execution of G4 P1000 ; Wait one second (macro code)
[debug] Completed M292 P0 ; cancel message
[debug] Processing G4 P1000 ; Wait one second
[debug] Waiting for execution of G1 E-10 F1800 ; Retract 10mm of filament at 30 mm/s (macro code)
[debug] Processing G1 E-10 F1800 ; Retract 10mm of filament at 30 mm/s
[debug] Waiting for execution of M400 ; Wait for moves to complete (macro code)
[debug] Processing M400 ; Wait for moves to complete
[debug] Waiting for execution of M292 ; Hide the message (macro code)
[debug] Processing M292 ; Hide the message
[debug] HTTP: Sent G4 P1000 ; Wait one second, remaining space 1128, needed 32
[debug] Completed M291 P"Ready to feed filament. Insert filament and press function button." R"Loading PLA" S1
[debug] HTTP: Sent G1 E-10 F1800 ; Retract 10mm of filament at 30 mm/s, remaining space 1088, needed 40
[debug] Waiting for execution of G10 S0 ; Turn the heater off again (macro code)
[debug] Processing G10 S0 ; Turn the heater off again
[debug] HTTP: Sent M400 ; Wait for moves to complete, remaining space 1064, needed 24
[debug] HTTP: Sent M292 ; Hide the message, remaining space 1040, needed 24
[debug] HTTP: Sent G10 S0 ; Turn the heater off again, remaining space 1008, needed 32
[debug] Requesting update of key state, seq 25 -> 27
[debug] Updated key state
[debug] Completed M577 P1 S0 ; pause and wait for endstop trigger
[debug] Completed M400 ; wait for all moves to finish
[debug] Waiting for execution of G92 E0 ; Reset the extruder count (macro code)
[debug] Processing G92 E0 ; Reset the extruder count
[debug] Waiting for execution of M84 E0 ; Turn extruder motors off (macro code)
[debug] Processing M84 E0 ; Turn extruder motors off
[debug] Completed M577 P1 S0 ; pause and wait for endstop trigger
[debug] Completed M400 ; wait for all moves to finish
[debug] Completed M292 P0 ; cancel message
[debug] Waiting for execution of G28 (macro code)
[debug] Waiting for execution of ;T-1           ; deselect tool (macro code)
[debug] Processing G28
[debug] Processing ;T-1         ; deselect tool
[debug] Completed ;T-1          ; deselect tool
[debug] Completed M83 ; relative e steps
[debug] Completed G1 E475 F3600 ; Feed 475 mm of filament at 60 mm/s
[debug] Completed G92 E0 ; reset e steps
[debug] HTTP: Sent G92 E0 ; Reset the extruder count, remaining space 1312, needed 32
[debug] Completed G1 E10 F300 ; Feed 10 mm of filament at 5 mm/s
[debug] Completed G1 E20 F300 ; Feed 20mm of filament at 5 mm/s
[debug] HTTP: Sent M84 E0 ; Turn extruder motors off, remaining space 1280, needed 32
[debug] HTTP: Sent G28, remaining space 1256, needed 24
[debug] Completed G1 E10 F120 ; Feed 10mm of filament at 2 mm/s
[debug] Requesting update of key state, seq 27 -> 28
[debug] Updated key state
[debug] Completed G4 P1000 ; Wait one second
[debug] Completed G1 E-10 F1800 ; Retract 10mm of filament at 30 mm/s
[debug] Requesting update of key state, seq 28 -> 29
[debug] Completed M400 ; Wait for moves to complete
[debug] Completed M292 ; Hide the message
[debug] Completed G10 S0 ; Turn the heater off again
[debug] Completed G92 E0 ; Reset the extruder count
[debug] Completed M84 E0 ; Turn extruder motors off
[info] Starting macro file homeall.g on channel HTTP
[debug] Waiting for execution of M98 P"homez.g" (macro code)
[debug] Waiting for execution of M98 P"homex.g" (macro code)
[debug] Processing M98 P"homez.g"
[debug] Waiting for execution of M98 P"homey.g" (macro code)
[debug] Processing M98 P"homex.g"
[debug] Waiting for execution of G1 Y120 F3000 ; move Y out of the way (macro code)
[debug] Processing M98 P"homey.g"
[debug] Processing G1 Y120 F3000 ; move Y out of the way
[debug] HTTP: Sent M98 P"homez.g", remaining space 1496, needed 40
[debug] HTTP: Sent M98 P"homex.g", remaining space 1456, needed 40
[debug] HTTP: Sent M98 P"homey.g", remaining space 1416, needed 40
[debug] HTTP: Sent G1 Y120 F3000 ; move Y out of the way, remaining space 1376, needed 40
[debug] HTTP: Suspending code M98 P"homex.g"
[debug] HTTP: Suspending code M98 P"homey.g"
[debug] HTTP: Suspending code G1 Y120 F3000 ; move Y out of the way
[info] Starting macro file homez.g on channel HTTP
[debug] Waiting for execution of G91 ; relative moves (macro code)
[debug] Processing G91 ; relative moves
[debug] Waiting for execution of G1 H1 Z200 F500 ; try to move Z towards home by 150mm & check for endstop (macro code)
[debug] Waiting for execution of G1 H2 Z-5 F200 ; move Z 5mm away from endstop (macro code)
[debug] Waiting for execution of G1 H1 Z10 S1 ; try to move Z towards home by 10mm & check for endstop (macro code)
[debug] Processing G1 H1 Z200 F500 ; try to move Z towards home by 150mm & check for endstop
[debug] Waiting for execution of G90 ; absolute moves (macro code)
[debug] Processing G1 H2 Z-5 F200 ; move Z 5mm away from endstop
[debug] Processing G1 H1 Z10 S1 ; try to move Z towards home by 10mm & check for endstop
[debug] Processing G90 ; absolute moves
[debug] HTTP: Sent G91 ; relative moves, remaining space 1512, needed 24
[debug] HTTP: Sent G1 H1 Z200 F500 ; try to move Z towards home by 150mm & check for endstop, remaining space 1464, needed 48
[debug] HTTP: Sent G1 H2 Z-5 F200 ; move Z 5mm away from endstop, remaining space 1416, needed 48
[debug] HTTP: Sent G1 H1 Z10 S1 ; try to move Z towards home by 10mm & check for endstop, remaining space 1368, needed 48
[debug] HTTP: Sent G90 ; absolute moves, remaining space 1344, needed 24
[debug] Updated key state
[debug] Completed G91 ; relative moves
[debug] Completed G1 H1 Z200 F500 ; try to move Z towards home by 150mm & check for endstop
[debug] Completed G1 H2 Z-5 F200 ; move Z 5mm away from endstop
[debug] Completed G1 H1 Z10 S1 ; try to move Z towards home by 10mm & check for endstop
[debug] Completed G90 ; absolute moves
[debug] Finished codes from macro file homez.g
[info] HTTP: Finished macro file homez.g
[debug] Completed M98 P"homez.g"
[debug] HTTP: ==> Finished starting code: M98 P"homez.g"
[debug] HTTP: Sent M98 P"homex.g", remaining space 1496, needed 40
[debug] HTTP: -> Resumed suspended code
[debug] HTTP: Sent M98 P"homey.g", remaining space 1456, needed 40
[debug] HTTP: -> Resumed suspended code
[debug] HTTP: Sent G1 Y120 F3000 ; move Y out of the way, remaining space 1416, needed 40
[debug] HTTP: -> Resumed suspended code
[debug] HTTP: Suspending code M98 P"homey.g"
[debug] HTTP: Suspending code G1 Y120 F3000 ; move Y out of the way
[info] Starting macro file homex.g on channel HTTP
[debug] Waiting for execution of G91 ; relative moves (macro code)
[debug] Processing G91 ; relative moves
[debug] Waiting for execution of G1 H1 X-200 F3000 ; try to move x towards home by 150mm & check for endstop (macro code)
[debug] Processing G1 H1 X-200 F3000 ; try to move x towards home by 150mm & check for endstop
[debug] Waiting for execution of G1 H2 X4 F600 ; move x 4mm away from endstop (macro code)
[debug] Processing G1 H2 X4 F600 ; move x 4mm away from endstop
[debug] Waiting for execution of G1 H1 X-10 ; try to move x towards home by 10mm & check for endstop (macro code)
[debug] Processing G1 H1 X-10 ; try to move x towards home by 10mm & check for endstop
[debug] Waiting for execution of G90 ; absolute moves (macro code)
[debug] Processing G90 ; absolute moves
[debug] HTTP: Sent G91 ; relative moves, remaining space 1512, needed 24
[debug] HTTP: Sent G1 H1 X-200 F3000 ; try to move x towards home by 150mm & check for endstop, remaining space 1464, needed 48
[debug] HTTP: Sent G1 H2 X4 F600 ; move x 4mm away from endstop, remaining space 1416, needed 48
[debug] HTTP: Sent G1 H1 X-10 ; try to move x towards home by 10mm & check for endstop, remaining space 1376, needed 40
[debug] HTTP: Sent G90 ; absolute moves, remaining space 1352, needed 24
[debug] Completed G91 ; relative moves
[debug] Completed G1 H1 X-200 F3000 ; try to move x towards home by 150mm & check for endstop
[debug] Completed G1 H2 X4 F600 ; move x 4mm away from endstop
[debug] Completed G1 H1 X-10 ; try to move x towards home by 10mm & check for endstop
[debug] Completed G90 ; absolute moves
[debug] Finished codes from macro file homex.g
[info] HTTP: Finished macro file homex.g
[debug] Completed M98 P"homex.g"
[debug] HTTP: ==> Finished starting code: M98 P"homex.g"
[debug] HTTP: Sent M98 P"homey.g", remaining space 1496, needed 40
[debug] HTTP: -> Resumed suspended code
[debug] HTTP: Sent G1 Y120 F3000 ; move Y out of the way, remaining space 1456, needed 40
[debug] HTTP: -> Resumed suspended code
[debug] HTTP: Suspending code G1 Y120 F3000 ; move Y out of the way
[info] Starting macro file homey.g on channel HTTP
[debug] Waiting for execution of G91 ; relative moves (macro code)
[debug] Processing G91 ; relative moves
[debug] Waiting for execution of G1 H1 Y-200 F3000 ; try to move y towards home by 150mm & check for endstop (macro code)
[debug] Waiting for execution of G1 H2 Y4 F600 ; move y 4mm away from endstop (macro code)
[debug] Processing G1 H1 Y-200 F3000 ; try to move y towards home by 150mm & check for endstop
[debug] Waiting for execution of G1 H1 Y-10 ; try to move y towards home by 10mm & check for endstop (macro code)
[debug] Waiting for execution of G90 ; absolute moves (macro code)
[debug] Processing G1 H2 Y4 F600 ; move y 4mm away from endstop
[debug] Processing G1 H1 Y-10 ; try to move y towards home by 10mm & check for endstop
[debug] Processing G90 ; absolute moves
[debug] HTTP: Sent G91 ; relative moves, remaining space 1512, needed 24
[debug] HTTP: Sent G1 H1 Y-200 F3000 ; try to move y towards home by 150mm & check for endstop, remaining space 1464, needed 48
[debug] HTTP: Sent G1 H2 Y4 F600 ; move y 4mm away from endstop, remaining space 1416, needed 48
[debug] HTTP: Sent G1 H1 Y-10 ; try to move y towards home by 10mm & check for endstop, remaining space 1376, needed 40
[debug] HTTP: Sent G90 ; absolute moves, remaining space 1352, needed 24
[debug] Completed G91 ; relative moves
[debug] Completed G1 H1 Y-200 F3000 ; try to move y towards home by 150mm & check for endstop
[debug] Completed G1 H2 Y4 F600 ; move y 4mm away from endstop
[debug] Completed G1 H1 Y-10 ; try to move y towards home by 10mm & check for endstop
[debug] Completed G90 ; absolute moves
[debug] Finished codes from macro file homey.g
[info] HTTP: Finished macro file homey.g
[debug] Completed M98 P"homey.g"
[debug] HTTP: ==> Finished starting code: M98 P"homey.g"
[debug] HTTP: Sent G1 Y120 F3000 ; move Y out of the way, remaining space 1496, needed 40
[debug] HTTP: -> Resumed suspended code
[debug] Completed G1 Y120 F3000 ; move Y out of the way
[debug] Finished codes from macro file homeall.g
[info] HTTP: Finished macro file homeall.g
[debug] Completed G28
[debug] Finished codes from macro file Load
[debug] HTTP: ==> Finished starting code: G28
[info] HTTP: Finished macro file Load
[debug] Completed M98 P"0:/macros/Filaments/PLA/Load"
[debug] Finished codes from macro file load.g
[debug] HTTP: ==> Finished starting code: M98 P"0:/macros/Filaments/PLA/Load"
[info] HTTP: Finished macro file load.g
[debug] HTTP: ==> Finished starting code: M701 S"Filamentum PLA Extrafill"
[debug] Completed M701 S"Filamentum PLA Extrafill" =>
[debug] HTTP: Sent M703, remaining space 1512, needed 24
[info] Starting macro file config.g on channel HTTP
[debug] Waiting for execution of G10 P0 S215 R150 ; set nozzle active (S) and standby (R) temperatures (macro code)
[debug] Waiting for execution of M140 H0 S50 R0 ; map heated bed to heater 0 (macro code)
[debug] Waiting for execution of M144 S0 ; put bed into standby (macro code)
[debug] Processing G10 P0 S215 R150 ; set nozzle active (S) and standby (R) temperatures
[debug] Waiting for execution of ;M572 D0 S0.96                 ; set pressure advance (macro code)
[debug] Processing M140 H0 S50 R0 ; map heated bed to heater 0
[debug] Waiting for execution of ;M200 D1.75                            ; set material diameter (macro code)
[debug] Processing M144 S0 ; put bed into standby
[debug] Processing ;M572 D0 S0.96                       ; set pressure advance
[debug] Completed ;M572 D0 S0.96                        ; set pressure advance
[debug] Processing ;M200 D1.75                          ; set material diameter
[debug] Completed ;M200 D1.75                           ; set material diameter
[debug] HTTP: Sent G10 P0 S215 R150 ; set nozzle active (S) and standby (R) temperatures, remaining space 1488, needed 48
[debug] HTTP: Sent M140 H0 S50 R0 ; map heated bed to heater 0, remaining space 1440, needed 48
[debug] HTTP: Sent M144 S0 ; put bed into standby, remaining space 1408, needed 32
[debug] Completed G10 P0 S215 R150 ; set nozzle active (S) and standby (R) temperatures
[debug] Completed M140 H0 S50 R0 ; map heated bed to heater 0
[debug] Completed M144 S0 ; put bed into standby
[debug] Finished codes from macro file config.g
[debug] Requesting update of key heat, seq 11 -> 12
[info] HTTP: Finished macro file config.g
[debug] HTTP: ==> Finished starting code: M703 =>
[debug] Completed M703 =>
[debug] IPC#10: Connection closed
[debug] Updated key heat
[debug] IPC#11: Got new UNIX connection, checking mode...
[debug] IPC#11: Command processor added
[debug] IPC#11: Received command ResolvePath
[debug] IPC#11: Connection closed
[debug] IPC#12: Got new UNIX connection, checking mode...
[debug] IPC#12: Command processor added
[debug] IPC#12: Received command SimpleCode
[debug] Waiting for execution of M701
[debug] Processing M701
[debug] HTTP: Sent M701, remaining space 1512, needed 24
[debug] Completed M701 => Loaded filament in the selected tool: Filamentum PLA Extrafill
[debug] IPC#12: Connection closed