[debug] IPC#43: Got new UNIX connection, checking mode...
[debug] IPC#43: Command processor added
[debug] IPC#43: Received command SimpleCode
[debug] Waiting for execution of M98 P"0:/macros/PrepPrinter.g"
[debug] Processing M98 P"0:/macros/PrepPrinter.g"
[debug] HTTP: Sent M98 P"0:/macros/PrepPrinter.g", remaining space 1480, needed 56
[info] Starting macro file on channel HTTP
[debug] Waiting for execution of M561 (macro code)
[debug] Processing M561
[debug] Waiting for execution of G29 S2 (macro code)
[debug] Waiting for execution of G32 (macro code)
[debug] Processing G29 S2
[debug] Waiting for execution of G32 (macro code)
[debug] Waiting for execution of G29 S1 (macro code)
[debug] Processing G32
[debug] Processing G29 S1
[debug] HTTP: Sent M561, remaining space 1512, needed 24
[debug] HTTP: Sent G29 S2, remaining space 1480, needed 32
[debug] HTTP: Sent G32, remaining space 1456, needed 24
[debug] HTTP: Sent G32, remaining space 1432, needed 24
[debug] Completed M561
[debug] HTTP: Suspending code G32
[debug] Completed G29 S2
[info] Starting macro file on channel HTTP
[debug] Waiting for execution of ; bed.g (macro code)
[debug] Waiting for execution of ; called to perform automatic bed compensation via G32 (macro code)
[debug] Waiting for execution of G1 Z5 F3600 (macro code)
[debug] Waiting for execution of G30 P0 X-235 Y-222 Z-99999 ; probe near a leadscrew (macro code)
[debug] Waiting for execution of G30 P1 X2 Y235 Z-99999 ; probe near a leadscrew (macro code)
[debug] Waiting for execution of G30 P2 X230 Y-222 Z-99999 S3 ; probe near a leadscrew and calibrate 3 motors (macro code)
[debug] Processing ; bed.g
[debug] Completed ; bed.g
[debug] Processing ; called to perform automatic bed compensation via G32
[debug] Completed ; called to perform automatic bed compensation via G32
[debug] Processing G1 Z5 F3600
[debug] Processing G30 P0 X-235 Y-222 Z-99999 ; probe near a leadscrew
[debug] Processing G30 P1 X2 Y235 Z-99999 ; probe near a leadscrew
[debug] Processing G30 P2 X230 Y-222 Z-99999 S3 ; probe near a leadscrew and calibrate 3 motors
[debug] Requesting update of key move, seq 58 -> 60
[debug] HTTP: Sent G1 Z5 F3600, remaining space 1496, needed 40
[debug] HTTP: Sent G30 P0 X-235 Y-222 Z-99999 ; probe near a leadscrew, remaining space 1440, needed 56
[debug] HTTP: Sent G30 P1 X2 Y235 Z-99999 ; probe near a leadscrew, remaining space 1384, needed 56
[debug] HTTP: Sent G30 P2 X230 Y-222 Z-99999 S3 ; probe near a leadscrew and calibrate 3 motors, remaining space 1320, needed 64
[debug] Completed G1 Z5 F3600
[info] HTTP: Optional macro files deployprobe0.g and deployprobe.g not found
[debug] HTTP: Suspending code G30 P1 X2 Y235 Z-99999 ; probe near a leadscrew
[debug] HTTP: Suspending code G30 P2 X230 Y-222 Z-99999 S3 ; probe near a leadscrew and calibrate 3 motors
[debug] Updated key move
[info] HTTP: Finished intermediate macro file
[debug] HTTP: ==> Starting code: G30 P0 X-235 Y-222 Z-99999 ; probe near a leadscrew
[info] HTTP: Optional macro files retractprobe0.g and retractprobe.g not found
[debug] HTTP: ==> Starting code: G30 P0 X-235 Y-222 Z-99999 ; probe near a leadscrew
[debug] HTTP: Sent G30 P1 X2 Y235 Z-99999 ; probe near a leadscrew, remaining space 1480, needed 56
[debug] Completed G30 P0 X-235 Y-222 Z-99999 ; probe near a leadscrew
[debug] HTTP: -> Resumed suspended code
[debug] HTTP: Sent G30 P2 X230 Y-222 Z-99999 S3 ; probe near a leadscrew and calibrate 3 motors, remaining space 1416, needed 64
[debug] HTTP: -> Resumed suspended code
[info] HTTP: Optional macro files deployprobe0.g and deployprobe.g not found
[debug] HTTP: Suspending code G30 P2 X230 Y-222 Z-99999 S3 ; probe near a leadscrew and calibrate 3 motors
[info] HTTP: Finished intermediate macro file
[debug] HTTP: ==> Starting code: G30 P1 X2 Y235 Z-99999 ; probe near a leadscrew
[info] HTTP: Optional macro files retractprobe0.g and retractprobe.g not found
[debug] HTTP: ==> Starting code: G30 P1 X2 Y235 Z-99999 ; probe near a leadscrew
[debug] HTTP: Sent G30 P2 X230 Y-222 Z-99999 S3 ; probe near a leadscrew and calibrate 3 motors, remaining space 1472, needed 64
[debug] HTTP: -> Resumed suspended code
[debug] Completed G30 P1 X2 Y235 Z-99999 ; probe near a leadscrew
[info] HTTP: Optional macro files deployprobe0.g and deployprobe.g not found
[info] HTTP: Finished intermediate macro file
[debug] HTTP: ==> Starting code: G30 P2 X230 Y-222 Z-99999 S3 ; probe near a leadscrew and calibrate 3 motors
[info] HTTP: Optional macro files retractprobe0.g and retractprobe.g not found
[debug] HTTP: ==> Starting code: G30 P2 X230 Y-222 Z-99999 S3 ; probe near a leadscrew and calibrate 3 motors
[debug] Completed G30 P2 X230 Y-222 Z-99999 S3 ; probe near a leadscrew and calibrate 3 motors => Leadscrew adjustments made: 0.036 0.039 0.036, points used 3, (mean, deviation) before (0.037, 0.001) after (-0.000, 0.000)
[debug] Finished codes from macro file
[debug] Requesting update of key move, seq 60 -> 63
[info] HTTP: Finished macro file bed.g
[debug] HTTP: ==> Starting code: G32
[debug] HTTP: Sent G32, remaining space 1512, needed 24
[debug] HTTP: -> Resumed suspended code
[debug] Completed G32 => Leadscrew adjustments made: 0.036 0.039 0.036, points used 3, (mean, deviation) before (0.037, 0.001) after (-0.000, 0.000)
[info] Starting macro file on channel HTTP
[debug] Waiting for execution of ; bed.g (macro code)
[debug] Processing ; bed.g
[debug] Waiting for execution of ; called to perform automatic bed compensation via G32 (macro code)
[debug] Completed ; bed.g
[debug] Waiting for execution of G1 Z5 F3600 (macro code)
[debug] Processing ; called to perform automatic bed compensation via G32
[debug] Completed ; called to perform automatic bed compensation via G32
[debug] Processing G1 Z5 F3600
[debug] Waiting for execution of G30 P0 X-235 Y-222 Z-99999 ; probe near a leadscrew (macro code)
[debug] Processing G30 P0 X-235 Y-222 Z-99999 ; probe near a leadscrew
[debug] Waiting for execution of G30 P1 X2 Y235 Z-99999 ; probe near a leadscrew (macro code)
[debug] Processing G30 P1 X2 Y235 Z-99999 ; probe near a leadscrew
[debug] Waiting for execution of G30 P2 X230 Y-222 Z-99999 S3 ; probe near a leadscrew and calibrate 3 motors (macro code)
[debug] Processing G30 P2 X230 Y-222 Z-99999 S3 ; probe near a leadscrew and calibrate 3 motors
[debug] HTTP: Sent G1 Z5 F3600, remaining space 1496, needed 40
[debug] HTTP: Sent G30 P0 X-235 Y-222 Z-99999 ; probe near a leadscrew, remaining space 1440, needed 56
[debug] HTTP: Sent G30 P1 X2 Y235 Z-99999 ; probe near a leadscrew, remaining space 1384, needed 56
[debug] HTTP: Sent G30 P2 X230 Y-222 Z-99999 S3 ; probe near a leadscrew and calibrate 3 motors, remaining space 1320, needed 64
[debug] Completed G1 Z5 F3600
[debug] Updated key move
[info] HTTP: Optional macro files deployprobe0.g and deployprobe.g not found
[debug] HTTP: Suspending code G30 P1 X2 Y235 Z-99999 ; probe near a leadscrew
[debug] HTTP: Suspending code G30 P2 X230 Y-222 Z-99999 S3 ; probe near a leadscrew and calibrate 3 motors
[info] HTTP: Finished intermediate macro file
[debug] HTTP: ==> Starting code: G30 P0 X-235 Y-222 Z-99999 ; probe near a leadscrew
[info] HTTP: Optional macro files retractprobe0.g and retractprobe.g not found
[debug] HTTP: ==> Starting code: G30 P0 X-235 Y-222 Z-99999 ; probe near a leadscrew
[debug] HTTP: Sent G30 P1 X2 Y235 Z-99999 ; probe near a leadscrew, remaining space 1480, needed 56
[debug] HTTP: -> Resumed suspended code
[debug] Completed G30 P0 X-235 Y-222 Z-99999 ; probe near a leadscrew
[debug] HTTP: Sent G30 P2 X230 Y-222 Z-99999 S3 ; probe near a leadscrew and calibrate 3 motors, remaining space 1416, needed 64
[debug] HTTP: -> Resumed suspended code
[info] HTTP: Optional macro files deployprobe0.g and deployprobe.g not found
[debug] HTTP: Suspending code G30 P2 X230 Y-222 Z-99999 S3 ; probe near a leadscrew and calibrate 3 motors
[info] HTTP: Finished intermediate macro file
[debug] HTTP: ==> Starting code: G30 P1 X2 Y235 Z-99999 ; probe near a leadscrew
[info] HTTP: Optional macro files retractprobe0.g and retractprobe.g not found
[debug] HTTP: ==> Starting code: G30 P1 X2 Y235 Z-99999 ; probe near a leadscrew
[debug] HTTP: Sent G30 P2 X230 Y-222 Z-99999 S3 ; probe near a leadscrew and calibrate 3 motors, remaining space 1472, needed 64
[debug] HTTP: -> Resumed suspended code
[debug] Completed G30 P1 X2 Y235 Z-99999 ; probe near a leadscrew
[info] HTTP: Optional macro files deployprobe0.g and deployprobe.g not found
[info] HTTP: Finished intermediate macro file
[debug] HTTP: ==> Starting code: G30 P2 X230 Y-222 Z-99999 S3 ; probe near a leadscrew and calibrate 3 motors
[info] HTTP: Optional macro files retractprobe0.g and retractprobe.g not found
[debug] HTTP: ==> Starting code: G30 P2 X230 Y-222 Z-99999 S3 ; probe near a leadscrew and calibrate 3 motors
[debug] Completed G30 P2 X230 Y-222 Z-99999 S3 ; probe near a leadscrew and calibrate 3 motors => Leadscrew adjustments made: -0.000 -0.003 -0.004, points used 3, (mean, deviation) before (-0.002, 0.001) after (0.000, 0.000)
[debug] Finished codes from macro file
[info] HTTP: Finished macro file bed.g
[debug] HTTP: ==> Starting code: G32
[debug] Completed G32 => Leadscrew adjustments made: -0.000 -0.003 -0.004, points used 3, (mean, deviation) before (-0.002, 0.001) after (0.000, 0.000)
[debug] Requesting update of key move, seq 63 -> 66
[debug] Completed G29 S1 => Height map loaded from file heightmap.csv
[debug] Finished codes from macro file
[info] HTTP: Finished macro file PrepPrinter.g
[debug] HTTP: ==> Starting code: M98 P"0:/macros/PrepPrinter.g"
[debug] Updated key move
[debug] Requesting update of key move, seq 66 -> 67
[debug] Updated key move