-- Logs begin at Sun 2019-11-03 18:17:01 CST. --
Nov 05 16:52:25 duet3 DuetControlServer[13971]: [info] Height map loaded from file heightmap.csv
Nov 05 16:52:25 duet3 DuetControlServer[13971]: [info] Sent G10 P0 Z-2.70 X0 Y0, remaining space 1484 (4044 total), needed 52
Nov 05 16:52:25 duet3 DuetControlServer[13971]: [info] Sent G10 P1 Z-3.05 X-1.00 Y0.30, remaining space 1432 (3992 total), needed 52
Nov 05 16:52:25 duet3 DuetControlServer[13971]: [info] Completed G10 P0 Z-2.70 X0 Y0
Nov 05 16:52:25 duet3 DuetControlServer[13971]: [info] Completed G10 P1 Z-3.05 X-1.00 Y0.30
Nov 05 16:52:25 duet3 DuetControlServer[13971]: [info] Finished macro file 'Toffsets.g'
Nov 05 16:52:25 duet3 DuetControlServer[13971]: [info] Completed M98 P"/sys/Toffsets.g"; Set tool offsets from the bed. In separate file so test macro can invoke.
Nov 05 16:52:25 duet3 DuetControlServer[13971]: [info] Completed macro /opt/dsf/sd/sys/Toffsets.g + start code M98 P"/sys/Toffsets.g"; Set tool offsets from the bed. In separate file so test macro can invoke.
Nov 05 16:52:25 duet3 DuetControlServer[13971]: [info] Finished macro file 'config.g'
Nov 05 16:52:25 duet3 DuetControlServer[13971]: [info] Completed system macro /opt/dsf/sd/sys/config.g
Nov 05 16:53:21 duet3 DuetControlServer[13971]: [info] Processing G28
Nov 05 16:53:21 duet3 DuetControlServer[13971]: [info] Sent G28, remaining space 1516 (4076 total), needed 20
Nov 05 16:53:21 duet3 DuetControlServer[13971]: [info] Executing nested macro file '/opt/dsf/sd/sys/homeall.g' on channel HTTP
Nov 05 16:53:21 duet3 DuetControlServer[13971]: [info] Processing ; Home y, x, z, and Toolchanger Lock axes
Nov 05 16:53:21 duet3 DuetControlServer[13971]: [info] Completed ; Home y, x, z, and Toolchanger Lock axes
Nov 05 16:53:21 duet3 DuetControlServer[13971]: [info] Processing G1 Z5 F800 H2; Lift z so we don't crash
Nov 05 16:53:21 duet3 DuetControlServer[13971]: [info] Processing M98 P"homey.g"
Nov 05 16:53:21 duet3 DuetControlServer[13971]: [info] Processing M98 P"homex.g"
Nov 05 16:53:21 duet3 DuetControlServer[13971]: [info] Processing M98 P"homeu.g"
Nov 05 16:53:21 duet3 DuetControlServer[13971]: [info] Processing M98 P"homez.g"
Nov 05 16:53:21 duet3 DuetControlServer[13971]: [info] Processing G91
Nov 05 16:53:21 duet3 DuetControlServer[13971]: [info] Sent G91, remaining space 1516 (4076 total), needed 20
Nov 05 16:53:21 duet3 DuetControlServer[13971]: [info] Sent G1 Z5 F800 H2; Lift z so we don't crash, remaining space 1472 (4032 total), needed 44
Nov 05 16:53:21 duet3 DuetControlServer[13971]: [info] Sent M98 P"homey.g", remaining space 1436 (3996 total), needed 36
Nov 05 16:53:21 duet3 DuetControlServer[13971]: [info] Sent M98 P"homex.g", remaining space 1400 (3960 total), needed 36
Nov 05 16:53:21 duet3 DuetControlServer[13971]: [info] Sent M98 P"homeu.g", remaining space 1364 (3924 total), needed 36
Nov 05 16:53:21 duet3 DuetControlServer[13971]: [info] Sent M98 P"homez.g", remaining space 1328 (3888 total), needed 36
Nov 05 16:53:22 duet3 DuetControlServer[13971]: [info] Completed G91
Nov 05 16:53:23 duet3 DuetControlServer[13971]: [info] Executing nested macro file '/opt/dsf/sd/sys/homey.g' on channel HTTP
Nov 05 16:53:23 duet3 DuetControlServer[13971]: Suspending code M98 P"homex.g"
Nov 05 16:53:23 duet3 DuetControlServer[13971]: Suspending code M98 P"homeu.g"
Nov 05 16:53:23 duet3 DuetControlServer[13971]: Suspending code M98 P"homez.g"
Nov 05 16:53:23 duet3 DuetControlServer[13971]: [info] Completed G1 Z5 F800 H2; Lift z so we don't crash
Nov 05 16:53:23 duet3 DuetControlServer[13971]: [info] Processing G1 Y0 F6000
Nov 05 16:53:23 duet3 DuetControlServer[13971]: [info] Processing G90; Set absolute mode
Nov 05 16:53:23 duet3 DuetControlServer[13971]: [info] Processing G1 Y-10 F600 H1; Find endstop again slowly
Nov 05 16:53:23 duet3 DuetControlServer[13971]: [info] Processing G1 Y4 F600; Back off the endstop
Nov 05 16:53:23 duet3 DuetControlServer[13971]: [info] Processing G1 Y-360 F6000 H1; Big negative move to search for endstop
Nov 05 16:53:23 duet3 DuetControlServer[13971]: [info] Processing G91; Set relative mode
Nov 05 16:53:23 duet3 DuetControlServer[13971]: [info] Processing ; Home Y Axis
Nov 05 16:53:23 duet3 DuetControlServer[13971]: [info] Completed ; Home Y Axis
Nov 05 16:53:23 duet3 DuetControlServer[13971]: [info] Sent G91; Set relative mode, remaining space 1516 (4076 total), needed 20
Nov 05 16:53:23 duet3 DuetControlServer[13971]: [info] Sent G1 Y-360 F6000 H1; Big negative move to search for endstop, remaining space 1472 (4032 total), needed 44
Nov 05 16:53:23 duet3 DuetControlServer[13971]: [info] Sent G1 Y4 F600; Back off the endstop, remaining space 1436 (3996 total), needed 36
Nov 05 16:53:23 duet3 DuetControlServer[13971]: [info] Sent G1 Y-10 F600 H1; Find endstop again slowly, remaining space 1392 (3952 total), needed 44
Nov 05 16:53:23 duet3 DuetControlServer[13971]: [info] Sent G90; Set absolute mode, remaining space 1372 (3932 total), needed 20
Nov 05 16:53:23 duet3 DuetControlServer[13971]: [info] Sent G1 Y0 F6000, remaining space 1336 (3896 total), needed 36
Nov 05 16:53:23 duet3 DuetControlServer[13971]: [info] Completed G91; Set relative mode
Nov 05 16:53:23 duet3 DuetControlServer[13971]: [info] Completed G1 Y-360 F6000 H1; Big negative move to search for endstop
Nov 05 16:53:23 duet3 DuetControlServer[13971]: [info] Completed G1 Y4 F600; Back off the endstop
Nov 05 16:53:24 duet3 DuetControlServer[13971]: [info] Completed G1 Y-10 F600 H1; Find endstop again slowly
Nov 05 16:53:24 duet3 DuetControlServer[13971]: [info] Completed G90; Set absolute mode
Nov 05 16:53:24 duet3 DuetControlServer[13971]: [info] Completed G1 Y0 F6000
Nov 05 16:53:24 duet3 DuetControlServer[13971]: [info] Finished macro file 'homey.g'
Nov 05 16:53:24 duet3 DuetControlServer[13971]: [info] Sent M98 P"homex.g", remaining space 1500 (4060 total), needed 36
Nov 05 16:53:24 duet3 DuetControlServer[13971]: -> Resumed suspended code
Nov 05 16:53:24 duet3 DuetControlServer[13971]: [info] Sent M98 P"homeu.g", remaining space 1464 (4024 total), needed 36
Nov 05 16:53:24 duet3 DuetControlServer[13971]: -> Resumed suspended code
Nov 05 16:53:24 duet3 DuetControlServer[13971]: [info] Sent M98 P"homez.g", remaining space 1428 (3988 total), needed 36
Nov 05 16:53:24 duet3 DuetControlServer[13971]: -> Resumed suspended code
Nov 05 16:53:24 duet3 DuetControlServer[13971]: [info] Completed macro /opt/dsf/sd/sys/homey.g + start code M98 P"homey.g"
Nov 05 16:53:24 duet3 DuetControlServer[13971]: [info] Completed M98 P"homey.g"
Nov 05 16:53:24 duet3 DuetControlServer[13971]: [info] Executing nested macro file '/opt/dsf/sd/sys/homex.g' on channel HTTP
Nov 05 16:53:24 duet3 DuetControlServer[13971]: Suspending code M98 P"homeu.g"
Nov 05 16:53:24 duet3 DuetControlServer[13971]: Suspending code M98 P"homez.g"
Nov 05 16:53:24 duet3 DuetControlServer[13971]: [info] Processing ; Home X Axis
Nov 05 16:53:24 duet3 DuetControlServer[13971]: [info] Completed ; Home X Axis
Nov 05 16:53:24 duet3 DuetControlServer[13971]: [info] Processing G91; Set relative mode
Nov 05 16:53:24 duet3 DuetControlServer[13971]: [info] Processing G1 X-330 F6000 H1; Big negative move to search for endstop
Nov 05 16:53:24 duet3 DuetControlServer[13971]: [info] Processing G1 X4 F600; Back off the endstop
Nov 05 16:53:24 duet3 DuetControlServer[13971]: [info] Sent G91; Set relative mode, remaining space 1516 (3968 total), needed 20
Nov 05 16:53:24 duet3 DuetControlServer[13971]: [info] Sent G1 X-330 F6000 H1; Big negative move to search for endstop, remaining space 1472 (3924 total), needed 44
Nov 05 16:53:24 duet3 DuetControlServer[13971]: [info] Sent G1 X4 F600; Back off the endstop, remaining space 1436 (3888 total), needed 36
Nov 05 16:53:24 duet3 DuetControlServer[13971]: [info] Processing G90; Set absolute mode
Nov 05 16:53:24 duet3 DuetControlServer[13971]: [info] Processing G1 X-10 F600 H1; Find endstop again slowly
Nov 05 16:53:24 duet3 DuetControlServer[13971]: [info] Processing G1 X0 F6000
Nov 05 16:53:24 duet3 DuetControlServer[13971]: [info] Sent G1 X-10 F600 H1; Find endstop again slowly, remaining space 1392 (3844 total), needed 44
Nov 05 16:53:24 duet3 DuetControlServer[13971]: [info] Sent G90; Set absolute mode, remaining space 1372 (3824 total), needed 20
Nov 05 16:53:24 duet3 DuetControlServer[13971]: [info] Sent G1 X0 F6000, remaining space 1336 (3788 total), needed 36
Nov 05 16:53:24 duet3 DuetControlServer[13971]: [info] Completed G91; Set relative mode
Nov 05 16:53:25 duet3 DuetControlServer[13971]: [info] Completed G1 X4 F600; Back off the endstop
Nov 05 16:53:25 duet3 DuetControlServer[13971]: [info] Completed G1 X-330 F6000 H1; Big negative move to search for endstop
Nov 05 16:53:25 duet3 DuetControlServer[13971]: [info] Finished macro file 'homex.g'
Nov 05 16:53:25 duet3 DuetControlServer[13971]: [info] Completed G90; Set absolute mode
Nov 05 16:53:25 duet3 DuetControlServer[13971]: [info] Completed G1 X0 F6000
Nov 05 16:53:25 duet3 DuetControlServer[13971]: [info] Completed G1 X-10 F600 H1; Find endstop again slowly
Nov 05 16:53:25 duet3 DuetControlServer[13971]: [info] Sent M98 P"homeu.g", remaining space 1500 (4060 total), needed 36
Nov 05 16:53:25 duet3 DuetControlServer[13971]: -> Resumed suspended code
Nov 05 16:53:25 duet3 DuetControlServer[13971]: [info] Sent M98 P"homez.g", remaining space 1464 (4024 total), needed 36
Nov 05 16:53:25 duet3 DuetControlServer[13971]: -> Resumed suspended code
Nov 05 16:53:25 duet3 DuetControlServer[13971]: [info] Completed macro /opt/dsf/sd/sys/homex.g + start code M98 P"homex.g"
Nov 05 16:53:25 duet3 DuetControlServer[13971]: [info] Completed M98 P"homex.g"
Nov 05 16:53:25 duet3 DuetControlServer[13971]: [info] Executing nested macro file '/opt/dsf/sd/sys/homeu.g' on channel HTTP
Nov 05 16:53:25 duet3 DuetControlServer[13971]: Suspending code M98 P"homez.g"
Nov 05 16:53:25 duet3 DuetControlServer[13971]: [info] Processing ; Home U Axis
Nov 05 16:53:25 duet3 DuetControlServer[13971]: [info] Completed ; Home U Axis
Nov 05 16:53:25 duet3 DuetControlServer[13971]: [info] Processing G91; Set relative mode
Nov 05 16:53:25 duet3 DuetControlServer[13971]: [info] Sent G91; Set relative mode, remaining space 1516 (4004 total), needed 20
Nov 05 16:53:25 duet3 DuetControlServer[13971]: [info] Processing G1 U-360 F9000 H1; Big negative move to search for home endstop
Nov 05 16:53:25 duet3 DuetControlServer[13971]: [info] Processing G1 U6 F600; Back off the endstop
Nov 05 16:53:25 duet3 DuetControlServer[13971]: [info] Processing G1 U-10 F600 H1; Find endstop again slowly
Nov 05 16:53:25 duet3 DuetControlServer[13971]: [info] Sent G1 U-360 F9000 H1; Big negative move to search for home endstop, remaining space 1472 (3960 total), needed 44
Nov 05 16:53:25 duet3 DuetControlServer[13971]: [info] Sent G1 U6 F600; Back off the endstop, remaining space 1436 (3924 total), needed 36
Nov 05 16:53:25 duet3 DuetControlServer[13971]: [info] Sent G1 U-10 F600 H1; Find endstop again slowly, remaining space 1392 (3880 total), needed 44
Nov 05 16:53:25 duet3 DuetControlServer[13971]: [info] Processing G90; Set absolute mode
Nov 05 16:53:26 duet3 DuetControlServer[13971]: [info] Sent G90; Set absolute mode, remaining space 1372 (3932 total), needed 20
Nov 05 16:53:26 duet3 DuetControlServer[13971]: [info] Completed G91; Set relative mode
Nov 05 16:53:26 duet3 DuetControlServer[13971]: [info] Completed G1 U-360 F9000 H1; Big negative move to search for home endstop
Nov 05 16:53:26 duet3 DuetControlServer[13971]: [info] Completed G1 U6 F600; Back off the endstop
Nov 05 16:53:27 duet3 DuetControlServer[13971]: [info] Finished macro file 'homeu.g'
Nov 05 16:53:27 duet3 DuetControlServer[13971]: [info] Completed G90; Set absolute mode
Nov 05 16:53:27 duet3 DuetControlServer[13971]: [info] Completed G1 U-10 F600 H1; Find endstop again slowly
Nov 05 16:53:27 duet3 DuetControlServer[13971]: [info] Sent M98 P"homez.g", remaining space 1500 (4060 total), needed 36
Nov 05 16:53:27 duet3 DuetControlServer[13971]: -> Resumed suspended code
Nov 05 16:53:27 duet3 DuetControlServer[13971]: [info] Completed M98 P"homeu.g"
Nov 05 16:53:27 duet3 DuetControlServer[13971]: [info] Completed macro /opt/dsf/sd/sys/homeu.g + start code M98 P"homeu.g"
Nov 05 16:53:27 duet3 DuetControlServer[13971]: [info] Executing nested macro file '/opt/dsf/sd/sys/homez.g' on channel HTTP
Nov 05 16:53:27 duet3 DuetControlServer[13971]: [info] Processing ; Home Z Axis
Nov 05 16:53:27 duet3 DuetControlServer[13971]: [info] Completed ; Home Z Axis
Nov 05 16:53:27 duet3 DuetControlServer[13971]: [info] Processing G90
Nov 05 16:53:27 duet3 DuetControlServer[13971]: [info] Sent G90, remaining space 1516 (4076 total), needed 20
Nov 05 16:53:27 duet3 DuetControlServer[13971]: [info] Processing G1 X150 Y150 F10000; Move to the center of the bed
Nov 05 16:53:27 duet3 DuetControlServer[13971]: [info] Processing M558 F500; Set the probing speed
Nov 05 16:53:27 duet3 DuetControlServer[13971]: [info] Processing G30
Nov 05 16:53:27 duet3 DuetControlServer[13971]: [info] Processing M558 F50; Set a slower probing speed
Nov 05 16:53:27 duet3 DuetControlServer[13971]: [info] Sent G1 X150 Y150 F10000; Move to the center of the bed, remaining space 1472 (4032 total), needed 44
Nov 05 16:53:27 duet3 DuetControlServer[13971]: [info] Sent M558 F500; Set the probing speed, remaining space 1444 (4004 total), needed 28
Nov 05 16:53:27 duet3 DuetControlServer[13971]: [info] Sent G30, remaining space 1424 (3984 total), needed 20
Nov 05 16:53:27 duet3 DuetControlServer[13971]: [info] Sent M558 F50; Set a slower probing speed, remaining space 1396 (3956 total), needed 28
Nov 05 16:53:27 duet3 DuetControlServer[13971]: [info] Processing G30
Nov 05 16:53:27 duet3 DuetControlServer[13971]: [info] Processing ;G32                         ; Run 3-point bed calibration defined in bed.g
Nov 05 16:53:27 duet3 DuetControlServer[13971]: [info] Completed ;G32                         ; Run 3-point bed calibration defined in bed.g
Nov 05 16:53:27 duet3 DuetControlServer[13971]: [info] Sent G30, remaining space 1376 (3936 total), needed 20
Nov 05 16:53:27 duet3 DuetControlServer[13971]: [info] Completed G90
Nov 05 16:53:27 duet3 DuetControlServer[13971]: [info] Completed M558 F500; Set the probing speed
Nov 05 16:53:27 duet3 DuetControlServer[13971]: [info] Completed G1 X150 Y150 F10000; Move to the center of the bed
Nov 05 16:53:29 duet3 DuetControlServer[13971]: [info] Optional macro file 'deployprobe.g' not found
Nov 05 16:53:29 duet3 DuetControlServer[13971]: Suspending code M558 F50; Set a slower probing speed
Nov 05 16:53:29 duet3 DuetControlServer[13971]: Suspending code G30
Nov 05 16:53:29 duet3 DuetControlServer[13971]: [info] Sent M558 F50; Set a slower probing speed, remaining space 1488 (3908 total), needed 28
Nov 05 16:53:29 duet3 DuetControlServer[13971]: -> Resumed suspended code
Nov 05 16:53:29 duet3 DuetControlServer[13971]: [info] Sent G30, remaining space 1468 (3888 total), needed 20
Nov 05 16:53:29 duet3 DuetControlServer[13971]: -> Resumed suspended code
Nov 05 16:53:35 duet3 DuetControlServer[13971]: [info] Optional macro file 'retractprobe.g' not found
Nov 05 16:53:35 duet3 DuetControlServer[13971]: Suspending code M558 F50; Set a slower probing speed
Nov 05 16:53:35 duet3 DuetControlServer[13971]: Suspending code G30
Nov 05 16:53:35 duet3 DuetControlServer[13971]: [info] Sent M558 F50; Set a slower probing speed, remaining space 1488 (4020 total), needed 28
Nov 05 16:53:35 duet3 DuetControlServer[13971]: -> Resumed suspended code
Nov 05 16:53:35 duet3 DuetControlServer[13971]: [info] Sent G30, remaining space 1468 (4000 total), needed 20
Nov 05 16:53:35 duet3 DuetControlServer[13971]: -> Resumed suspended code
Nov 05 16:53:35 duet3 DuetControlServer[13971]: [info] Completed G30
Nov 05 16:53:35 duet3 DuetControlServer[13971]: [info] Completed M558 F50; Set a slower probing speed
Nov 05 16:53:35 duet3 DuetControlServer[13971]: [info] Optional macro file 'deployprobe.g' not found
Nov 05 16:53:50 duet3 DuetControlServer[13971]: [info] Optional macro file 'retractprobe.g' not found
Nov 05 16:53:50 duet3 DuetControlServer[13971]: [info] Completed G30
Nov 05 16:53:50 duet3 DuetControlServer[13971]: [info] Finished macro file 'homez.g'
Nov 05 16:53:50 duet3 DuetControlServer[13971]: [info] Completed M98 P"homez.g"
Nov 05 16:53:50 duet3 DuetControlServer[13971]: [info] Completed macro /opt/dsf/sd/sys/homez.g + start code M98 P"homez.g"
Nov 05 16:53:50 duet3 DuetControlServer[13971]: [info] Finished macro file 'homeall.g'
Nov 05 16:53:50 duet3 DuetControlServer[13971]: [info] Completed macro /opt/dsf/sd/sys/homeall.g + start code G28
Nov 05 16:53:50 duet3 DuetControlServer[13971]: [info] Completed G28
Nov 05 16:53:56 duet3 DuetControlServer[13971]: [info] Processing M98 P"0:/macros/Diagnose M122"
Nov 05 16:53:56 duet3 DuetControlServer[13971]: [info] Sent M98 P"0:/macros/Diagnose M122", remaining space 1484 (4044 total), needed 52
Nov 05 16:53:56 duet3 DuetControlServer[13971]: [info] Executing nested macro file '/opt/dsf/sd/macros/Diagnose M122' on channel HTTP
Nov 05 16:53:56 duet3 DuetControlServer[13971]: [info] Processing M122 B1
Nov 05 16:53:56 duet3 DuetControlServer[13971]: [info] Processing M122 B0
Nov 05 16:53:56 duet3 DuetControlServer[13971]: [info] Sent M122 B1, remaining space 1508 (4068 total), needed 28
Nov 05 16:53:56 duet3 DuetControlServer[13971]: [info] Sent M122 B0, remaining space 1480 (4040 total), needed 28
Nov 05 16:53:56 duet3 DuetControlServer[13971]: [info] Completed M122 B1
Nov 05 16:53:56 duet3 DuetControlServer[13971]: Diagnostics for board 1:
Nov 05 16:53:56 duet3 DuetControlServer[13971]: Board EXP3HC firmware 3.0beta1 2019-10-27b4
Nov 05 16:53:56 duet3 DuetControlServer[13971]: Never used RAM 162.6Kb, max stack 416b
Nov 05 16:53:56 duet3 DuetControlServer[13971]: HEAT 932 CanAsync 1456 CanRecv 1392 TMC 168 AIN 532 MAIN 2180
Nov 05 16:53:56 duet3 DuetControlServer[13971]: Driver 0: standstill, reads 43253, writes 3 timeouts 0, SG min/max not available
Nov 05 16:53:56 duet3 DuetControlServer[13971]: Driver 1: standstill, reads 43252, writes 3 timeouts 0, SG min/max not available
Nov 05 16:53:56 duet3 DuetControlServer[13971]: Driver 2: standstill, reads 43255, writes 0 timeouts 0, SG min/max not available
Nov 05 16:53:56 duet3 DuetControlServer[13971]: Move hiccups: 0
Nov 05 16:53:56 duet3 DuetControlServer[13971]: VIN: 24.5V, V12: 12.1V
Nov 05 16:53:56 duet3 DuetControlServer[13971]: MCU temperature: min 36.6C, current 36.8C, max 37.0C
Nov 05 16:53:56 duet3 DuetControlServer[13971]: Ticks since heat task active 155, ADC conversions started 165005016, completed 165005015, timed out 0
Nov 05 16:53:56 duet3 DuetControlServer[13971]: [info] Diagnostics for board 1:
Nov 05 16:53:56 duet3 DuetControlServer[13971]: Board EXP3HC firmware 3.0beta1 2019-10-27b4
Nov 05 16:53:56 duet3 DuetControlServer[13971]: Never used RAM 162.6Kb, max stack 416b
Nov 05 16:53:56 duet3 DuetControlServer[13971]: HEAT 932 CanAsync 1456 CanRecv 1392 TMC 168 AIN 532 MAIN 2180
Nov 05 16:53:56 duet3 DuetControlServer[13971]: Driver 0: standstill, reads 43253, writes 3 timeouts 0, SG min/max not available
Nov 05 16:53:56 duet3 DuetControlServer[13971]: Driver 1: standstill, reads 43252, writes 3 timeouts 0, SG min/max not available
Nov 05 16:53:56 duet3 DuetControlServer[13971]: Driver 2: standstill, reads 43255, writes 0 timeouts 0, SG min/max not available
Nov 05 16:53:56 duet3 DuetControlServer[13971]: Move hiccups: 0
Nov 05 16:53:56 duet3 DuetControlServer[13971]: VIN: 24.5V, V12: 12.1V
Nov 05 16:53:56 duet3 DuetControlServer[13971]: MCU temperature: min 36.6C, current 36.8C, max 37.0C
Nov 05 16:53:56 duet3 DuetControlServer[13971]: Ticks since heat task active 155, ADC conversions started 165005016, completed 165005015, timed out 0
Nov 05 16:53:56 duet3 DuetControlServer[13971]: [crit] Abnormal program termination: SPI task terminated
Nov 05 16:53:56 duet3 DuetControlServer[13971]: [crit] System.IO.IOException: Error 90 performing SPI data transfer.
Nov 05 16:53:56 duet3 DuetControlServer[13971]:    at LinuxDevices.SpiDevice.Transfer(Byte* writeBufferPtr, Byte* readBufferPtr, Int32 buffersLength) in /home/christian/duet/DuetSoftwareFramework/src/LinuxDevices/SpiDevice.cs:line 94
Nov 05 16:53:56 duet3 DuetControlServer[13971]:    at LinuxDevices.SpiDevice.TransferFullDuplex(ReadOnlySpan`1 writeBuffer, Span`1 readBuffer) in /home/christian/duet/DuetSoftwareFramework/src/LinuxDevices/SpiDevice.cs:line 74
Nov 05 16:53:56 duet3 DuetControlServer[13971]:    at DuetControlServer.SPI.DataTransfer.ExchangeData() in /home/christian/duet/DuetSoftwareFramework/src/DuetControlServer/SPI/DataTransfer.cs:line 997
Nov 05 16:53:56 duet3 DuetControlServer[13971]:    at DuetControlServer.SPI.DataTransfer.PerformFullTransfer(Boolean mustSucceed) in /home/christian/duet/DuetSoftwareFramework/src/DuetControlServer/SPI/DataTransfer.cs:line 142
Nov 05 16:53:56 duet3 DuetControlServer[13971]:    at DuetControlServer.SPI.Interface.Run() in /home/christian/duet/DuetSoftwareFramework/src/DuetControlServer/SPI/Interface.cs:line 508
Nov 05 16:53:56 duet3 systemd[1]: duetcontrolserver.service: Succeeded.
Nov 05 16:54:01 duet3 systemd[1]: duetcontrolserver.service: Service RestartSec=5s expired, scheduling restart.
Nov 05 16:54:01 duet3 systemd[1]: duetcontrolserver.service: Scheduled restart job, restart counter is at 14.
Nov 05 16:54:01 duet3 systemd[1]: Stopped Duet Control Server.
Nov 05 16:54:01 duet3 systemd[1]: Started Duet Control Server.
Nov 05 16:54:02 duet3 DuetControlServer[14021]: Duet Control Server v1.1.0.5
Nov 05 16:54:02 duet3 DuetControlServer[14021]: Written by Christian Hammacher for Duet3D
Nov 05 16:54:02 duet3 DuetControlServer[14021]: Licensed under the terms of the GNU Public License Version 3
Nov 05 16:54:02 duet3 DuetControlServer[14021]: Loading settings... Done!
Nov 05 16:54:02 duet3 DuetControlServer[14021]: Initialising variables... Done!
Nov 05 16:54:02 duet3 DuetControlServer[14021]: Connecting to RepRapFirmware... [warn] Kernel SPI buffer size is smaller than RepRapFirmware buffer size (4096 configured vs 8192 required)
Nov 05 16:54:02 duet3 DuetControlServer[14021]: Unhandled exception. System.IO.IOException: Error 90 performing SPI data transfer.
Nov 05 16:54:02 duet3 DuetControlServer[14021]:    at LinuxDevices.SpiDevice.Transfer(Byte* writeBufferPtr, Byte* readBufferPtr, Int32 buffersLength) in /home/christian/duet/DuetSoftwareFramework/src/LinuxDevices/SpiDevice.cs:line 94
Nov 05 16:54:02 duet3 DuetControlServer[14021]:    at LinuxDevices.SpiDevice.TransferFullDuplex(ReadOnlySpan`1 writeBuffer, Span`1 readBuffer) in /home/christian/duet/DuetSoftwareFramework/src/LinuxDevices/SpiDevice.cs:line 74
Nov 05 16:54:02 duet3 DuetControlServer[14021]:    at DuetControlServer.SPI.DataTransfer.ExchangeData() in /home/christian/duet/DuetSoftwareFramework/src/DuetControlServer/SPI/DataTransfer.cs:line 997
Nov 05 16:54:02 duet3 DuetControlServer[14021]:    at DuetControlServer.SPI.DataTransfer.PerformFullTransfer(Boolean mustSucceed) in /home/christian/duet/DuetSoftwareFramework/src/DuetControlServer/SPI/DataTransfer.cs:line 142
Nov 05 16:54:02 duet3 DuetControlServer[14021]:    at DuetControlServer.SPI.Interface.Connect() in /home/christian/duet/DuetSoftwareFramework/src/DuetControlServer/SPI/Interface.cs:line 364
Nov 05 16:54:02 duet3 DuetControlServer[14021]:    at DuetControlServer.Program.Main(String[] args) in /home/christian/duet/DuetSoftwareFramework/src/DuetControlServer/Program.cs:line 132
Nov 05 16:54:02 duet3 DuetControlServer[14021]:    at DuetControlServer.Program.<Main>(String[] args)
Nov 05 16:54:02 duet3 systemd[1]: duetcontrolserver.service: Main process exited, code=killed, status=6/ABRT
Nov 05 16:54:02 duet3 systemd[1]: duetcontrolserver.service: Failed with result 'signal'.
Nov 05 16:54:07 duet3 systemd[1]: duetcontrolserver.service: Service RestartSec=5s expired, scheduling restart.
Nov 05 16:54:07 duet3 systemd[1]: duetcontrolserver.service: Scheduled restart job, restart counter is at 15.
Nov 05 16:54:07 duet3 systemd[1]: Stopped Duet Control Server.
Nov 05 16:54:07 duet3 systemd[1]: Started Duet Control Server.
Nov 05 16:54:07 duet3 DuetControlServer[14032]: Duet Control Server v1.1.0.5
Nov 05 16:54:07 duet3 DuetControlServer[14032]: Written by Christian Hammacher for Duet3D
Nov 05 16:54:07 duet3 DuetControlServer[14032]: Licensed under the terms of the GNU Public License Version 3
Nov 05 16:54:08 duet3 DuetControlServer[14032]: Loading settings... Done!
Nov 05 16:54:08 duet3 DuetControlServer[14032]: Initialising variables... Done!
Nov 05 16:54:08 duet3 DuetControlServer[14032]: Connecting to RepRapFirmware... [warn] Kernel SPI buffer size is smaller than RepRapFirmware buffer size (4096 configured vs 8192 required)
Nov 05 16:54:08 duet3 DuetControlServer[14032]: Unhandled exception. System.IO.IOException: Error 90 performing SPI data transfer.
Nov 05 16:54:08 duet3 DuetControlServer[14032]:    at LinuxDevices.SpiDevice.Transfer(Byte* writeBufferPtr, Byte* readBufferPtr, Int32 buffersLength) in /home/christian/duet/DuetSoftwareFramework/src/LinuxDevices/SpiDevice.cs:line 94
Nov 05 16:54:08 duet3 DuetControlServer[14032]:    at LinuxDevices.SpiDevice.TransferFullDuplex(ReadOnlySpan`1 writeBuffer, Span`1 readBuffer) in /home/christian/duet/DuetSoftwareFramework/src/LinuxDevices/SpiDevice.cs:line 74
Nov 05 16:54:08 duet3 DuetControlServer[14032]:    at DuetControlServer.SPI.DataTransfer.ExchangeData() in /home/christian/duet/DuetSoftwareFramework/src/DuetControlServer/SPI/DataTransfer.cs:line 997
Nov 05 16:54:08 duet3 DuetControlServer[14032]:    at DuetControlServer.SPI.DataTransfer.PerformFullTransfer(Boolean mustSucceed) in /home/christian/duet/DuetSoftwareFramework/src/DuetControlServer/SPI/DataTransfer.cs:line 142
Nov 05 16:54:08 duet3 DuetControlServer[14032]:    at DuetControlServer.SPI.Interface.Connect() in /home/christian/duet/DuetSoftwareFramework/src/DuetControlServer/SPI/Interface.cs:line 364
Nov 05 16:54:08 duet3 DuetControlServer[14032]:    at DuetControlServer.Program.Main(String[] args) in /home/christian/duet/DuetSoftwareFramework/src/DuetControlServer/Program.cs:line 132
Nov 05 16:54:08 duet3 DuetControlServer[14032]:    at DuetControlServer.Program.<Main>(String[] args)
Nov 05 16:54:08 duet3 systemd[1]: duetcontrolserver.service: Main process exited, code=killed, status=6/ABRT
Nov 05 16:54:08 duet3 systemd[1]: duetcontrolserver.service: Failed with result 'signal'.
Nov 05 16:54:13 duet3 systemd[1]: duetcontrolserver.service: Service RestartSec=5s expired, scheduling restart.
Nov 05 16:54:13 duet3 systemd[1]: duetcontrolserver.service: Scheduled restart job, restart counter is at 16.
Nov 05 16:54:13 duet3 systemd[1]: Stopped Duet Control Server.
Nov 05 16:54:13 duet3 systemd[1]: Started Duet Control Server.
Nov 05 16:54:13 duet3 DuetControlServer[14046]: Duet Control Server v1.1.0.5
Nov 05 16:54:13 duet3 DuetControlServer[14046]: Written by Christian Hammacher for Duet3D
Nov 05 16:54:13 duet3 DuetControlServer[14046]: Licensed under the terms of the GNU Public License Version 3
Nov 05 16:54:13 duet3 DuetControlServer[14046]: Loading settings... Done!
Nov 05 16:54:13 duet3 DuetControlServer[14046]: Initialising variables... Done!
Nov 05 16:54:13 duet3 DuetControlServer[14046]: Connecting to RepRapFirmware... [warn] Kernel SPI buffer size is smaller than RepRapFirmware buffer size (4096 configured vs 8192 required)
Nov 05 16:54:13 duet3 DuetControlServer[14046]: Unhandled exception. System.IO.IOException: Error 90 performing SPI data transfer.
Nov 05 16:54:13 duet3 DuetControlServer[14046]:    at LinuxDevices.SpiDevice.Transfer(Byte* writeBufferPtr, Byte* readBufferPtr, Int32 buffersLength) in /home/christian/duet/DuetSoftwareFramework/src/LinuxDevices/SpiDevice.cs:line 94
Nov 05 16:54:13 duet3 DuetControlServer[14046]:    at LinuxDevices.SpiDevice.TransferFullDuplex(ReadOnlySpan`1 writeBuffer, Span`1 readBuffer) in /home/christian/duet/DuetSoftwareFramework/src/LinuxDevices/SpiDevice.cs:line 74
Nov 05 16:54:13 duet3 DuetControlServer[14046]:    at DuetControlServer.SPI.DataTransfer.ExchangeData() in /home/christian/duet/DuetSoftwareFramework/src/DuetControlServer/SPI/DataTransfer.cs:line 997
Nov 05 16:54:13 duet3 DuetControlServer[14046]:    at DuetControlServer.SPI.DataTransfer.PerformFullTransfer(Boolean mustSucceed) in /home/christian/duet/DuetSoftwareFramework/src/DuetControlServer/SPI/DataTransfer.cs:line 142
Nov 05 16:54:13 duet3 DuetControlServer[14046]:    at DuetControlServer.SPI.Interface.Connect() in /home/christian/duet/DuetSoftwareFramework/src/DuetControlServer/SPI/Interface.cs:line 364
Nov 05 16:54:13 duet3 DuetControlServer[14046]:    at DuetControlServer.Program.Main(String[] args) in /home/christian/duet/DuetSoftwareFramework/src/DuetControlServer/Program.cs:line 132
Nov 05 16:54:13 duet3 DuetControlServer[14046]:    at DuetControlServer.Program.<Main>(String[] args)
Nov 05 16:54:13 duet3 systemd[1]: duetcontrolserver.service: Main process exited, code=killed, status=6/ABRT
Nov 05 16:54:13 duet3 systemd[1]: duetcontrolserver.service: Failed with result 'signal'.
Nov 05 16:54:19 duet3 systemd[1]: duetcontrolserver.service: Service RestartSec=5s expired, scheduling restart.
Nov 05 16:54:19 duet3 systemd[1]: duetcontrolserver.service: Scheduled restart job, restart counter is at 17.
Nov 05 16:54:19 duet3 systemd[1]: Stopped Duet Control Server.
Nov 05 16:54:19 duet3 systemd[1]: Started Duet Control Server.
Nov 05 16:54:19 duet3 DuetControlServer[14061]: Duet Control Server v1.1.0.5
Nov 05 16:54:19 duet3 DuetControlServer[14061]: Written by Christian Hammacher for Duet3D
Nov 05 16:54:19 duet3 DuetControlServer[14061]: Licensed under the terms of the GNU Public License Version 3
Nov 05 16:54:19 duet3 DuetControlServer[14061]: Loading settings... Done!
Nov 05 16:54:19 duet3 DuetControlServer[14061]: Initialising variables... Done!
Nov 05 16:54:19 duet3 DuetControlServer[14061]: Connecting to RepRapFirmware... [warn] Kernel SPI buffer size is smaller than RepRapFirmware buffer size (4096 configured vs 8192 required)
Nov 05 16:54:19 duet3 DuetControlServer[14061]: Unhandled exception. System.IO.IOException: Error 90 performing SPI data transfer.
Nov 05 16:54:19 duet3 DuetControlServer[14061]:    at LinuxDevices.SpiDevice.Transfer(Byte* writeBufferPtr, Byte* readBufferPtr, Int32 buffersLength) in /home/christian/duet/DuetSoftwareFramework/src/LinuxDevices/SpiDevice.cs:line 94
Nov 05 16:54:19 duet3 DuetControlServer[14061]:    at LinuxDevices.SpiDevice.TransferFullDuplex(ReadOnlySpan`1 writeBuffer, Span`1 readBuffer) in /home/christian/duet/DuetSoftwareFramework/src/LinuxDevices/SpiDevice.cs:line 74
Nov 05 16:54:19 duet3 DuetControlServer[14061]:    at DuetControlServer.SPI.DataTransfer.ExchangeData() in /home/christian/duet/DuetSoftwareFramework/src/DuetControlServer/SPI/DataTransfer.cs:line 997
Nov 05 16:54:19 duet3 DuetControlServer[14061]:    at DuetControlServer.SPI.DataTransfer.PerformFullTransfer(Boolean mustSucceed) in /home/christian/duet/DuetSoftwareFramework/src/DuetControlServer/SPI/DataTransfer.cs:line 142
Nov 05 16:54:19 duet3 DuetControlServer[14061]:    at DuetControlServer.SPI.Interface.Connect() in /home/christian/duet/DuetSoftwareFramework/src/DuetControlServer/SPI/Interface.cs:line 364
Nov 05 16:54:19 duet3 DuetControlServer[14061]:    at DuetControlServer.Program.Main(String[] args) in /home/christian/duet/DuetSoftwareFramework/src/DuetControlServer/Program.cs:line 132
Nov 05 16:54:19 duet3 DuetControlServer[14061]:    at DuetControlServer.Program.<Main>(String[] args)
Nov 05 16:54:19 duet3 systemd[1]: duetcontrolserver.service: Main process exited, code=killed, status=6/ABRT
Nov 05 16:54:19 duet3 systemd[1]: duetcontrolserver.service: Failed with result 'signal'.
Nov 05 16:54:24 duet3 systemd[1]: duetcontrolserver.service: Service RestartSec=5s expired, scheduling restart.
Nov 05 16:54:24 duet3 systemd[1]: duetcontrolserver.service: Scheduled restart job, restart counter is at 18.
Nov 05 16:54:24 duet3 systemd[1]: Stopped Duet Control Server.
Nov 05 16:54:24 duet3 systemd[1]: Started Duet Control Server.
Nov 05 16:54:25 duet3 DuetControlServer[14073]: Duet Control Server v1.1.0.5
Nov 05 16:54:25 duet3 DuetControlServer[14073]: Written by Christian Hammacher for Duet3D
Nov 05 16:54:25 duet3 DuetControlServer[14073]: Licensed under the terms of the GNU Public License Version 3
Nov 05 16:54:25 duet3 DuetControlServer[14073]: Loading settings... Done!
Nov 05 16:54:25 duet3 DuetControlServer[14073]: Initialising variables... Done!
Nov 05 16:54:25 duet3 DuetControlServer[14073]: Connecting to RepRapFirmware... [warn] Kernel SPI buffer size is smaller than RepRapFirmware buffer size (4096 configured vs 8192 required)
Nov 05 16:54:25 duet3 DuetControlServer[14073]: Done!
Nov 05 16:54:25 duet3 DuetControlServer[14073]: Creating IPC socket... Done!
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Executing system macro file '/opt/dsf/sd/sys/config.g' on channel Daemon
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Processing M550 P"duet3"
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Processing M905 P"2019-11-05" S"16:54:25"
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Processing ; Jubilee CoreXY ToolChanging Printer - Config File
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Processing ; This file intended for Duet 3 hardware, main board plus two expansion boards (or, later, four tool boards)
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Sent M550 P"duet3", remaining space 1500 (4060 total), needed 36
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Sent M905 P"2019-11-05" S"16:54:25", remaining space 1444 (4004 total), needed 56
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Completed ; Jubilee CoreXY ToolChanging Printer - Config File
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Completed ; This file intended for Duet 3 hardware, main board plus two expansion boards (or, later, four tool boards)
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Processing ; As of 10/14/2019 INCOMPLETE AND ONLY PARTIALLY TESTED.  See the discord for more info.
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Processing ; Name and Identification
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Completed ; Name and Identification
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Completed ; As of 10/14/2019 INCOMPLETE AND ONLY PARTIALLY TESTED.  See the discord for more info.
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Processing ; Printer name is now set on the R Pi.
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Processing ; Networking
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Completed ; Printer name is now set on the R Pi.
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Completed ; Networking
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Processing ;;;M552 P192.168.1.2 S1                    ; Use Ethernet with a static IP
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Processing ;;;M553 P255.255.255.0                     ; Netmask
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Completed ;;;M552 P192.168.1.2 S1                    ; Use Ethernet with a static IP
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Completed ;;;M553 P255.255.255.0                     ; Netmask
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Processing ;;;M554 192.168.1.3                        ; Gateway
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Processing M586 P1 S1; Enable FTP
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Completed ;;;M554 192.168.1.3                        ; Gateway
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Processing M586 P2 S1; Enable Telnet
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Processing G90; Send absolute coordinates...
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Processing G21; Set dimensions to millimetres
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Processing M555 P2; Set Marlin-style output
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Processing ; Debugging
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Completed ; Debugging
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Processing M111 S0; Debug off
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Processing M929 P"eventlog.txt" S1; Start logging to file eventlog.txt
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Processing ; General Preferences
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Completed ; General Preferences
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Sent M586 P1 S1; Enable FTP, remaining space 1408 (3968 total), needed 36
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Sent M586 P2 S1; Enable Telnet, remaining space 1372 (3932 total), needed 36
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Sent M111 S0; Debug off, remaining space 1344 (3904 total), needed 28
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Processing ; Axis to driver mapping
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Completed ; Axis to driver mapping
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Processing M83; ...but relative extruder moves
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Processing M584 X0 Y1 U2 Z3:4:5; X and Y for CoreXY.  U for toolchanger lock. Z has three drivers for kinematic bed suspension.
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Processing M584 E1.0:1.1; Extruders for four tools.
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Processing M569 P0 S0; Drive 0 direction | X stepper
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Processing M569 P1 S0; Drive 1 direction | Y Stepper
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Processing M569 P2 S0; Drive 2 direction | U Tool Changer Lock
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Processing M569 P3 S0; Drive 3 direction | Front Left Z
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Processing M569 P4 S0; Drive 4 direction | Front Right Z
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Processing ; End of main board drivers.  Expansion boards have three each.
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Completed ; End of main board drivers.  Expansion boards have three each.
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Processing M569 P5 S0; Drive 5 direction | Back Z
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Completed M550 P"duet3"
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Completed M905 P"2019-11-05" S"16:54:25"
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Completed M586 P1 S1; Enable FTP
Nov 05 16:54:25 duet3 DuetControlServer[14073]: FTP is enabled on port 21
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Completed M586 P2 S1; Enable Telnet
Nov 05 16:54:25 duet3 DuetControlServer[14073]: TELNET is enabled on port 23
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] FTP is enabled on port 21
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Completed M111 S0; Debug off
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] TELNET is enabled on port 23
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Completed M929 P"eventlog.txt" S1; Start logging to file eventlog.txt
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Sent M555 P2; Set Marlin-style output, remaining space 1508 (4068 total), needed 28
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Sent G21; Set dimensions to millimetres, remaining space 1488 (4048 total), needed 20
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Sent G90; Send absolute coordinates..., remaining space 1468 (4028 total), needed 20
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Sent M83; ...but relative extruder moves, remaining space 1448 (4008 total), needed 20
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Sent M584 X0 Y1 U2 Z3:4:5; X and Y for CoreXY.  U for toolchanger lock. Z has three drivers for kinematic bed suspension. , remaining space 1384 (3944 total), needed 64
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Sent M584 E1.0:1.1; Extruders for four tools. , remaining space 1348 (3908 total), needed 36
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Sent M569 P0 S0; Drive 0 direction | X stepper, remaining space 1312 (3872 total), needed 36
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Sent M569 P1 S0; Drive 1 direction | Y Stepper, remaining space 1276 (3836 total), needed 36
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Sent M569 P2 S0; Drive 2 direction | U Tool Changer Lock, remaining space 1240 (3800 total), needed 36
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Sent M569 P3 S0; Drive 3 direction | Front Left Z, remaining space 1204 (3764 total), needed 36
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Sent M569 P4 S0; Drive 4 direction | Front Right Z, remaining space 1168 (3728 total), needed 36
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Sent M569 P5 S0; Drive 5 direction | Back Z, remaining space 1132 (3692 total), needed 36
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Processing ; Expansion 0
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Completed ; Expansion 0
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Processing M569 P6 S1; Drive 6 direction | Extruder T0
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Processing M569 P7 S0; Drive 7 direction | Extruder T1
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Sent M569 P6 S1; Drive 6 direction | Extruder T0, remaining space 1096 (3656 total), needed 36
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Sent M569 P7 S0; Drive 7 direction | Extruder T1, remaining space 1060 (3620 total), needed 36
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Processing ; Expansion 1
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Completed ; Expansion 1
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Processing ;M569 P8 S0                  ; Drive 8 direction | Extruder T2
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Completed ;M569 P8 S0                  ; Drive 8 direction | Extruder T2
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Processing ;M569 P9 S0                  ; Drive 9 direction | Extruder T3
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Completed ;M569 P9 S0                  ; Drive 9 direction | Extruder T3
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Processing ; Kinematics
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Completed ; Kinematics
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Processing M669 K1; CoreXY mode
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Sent M669 K1; CoreXY mode, remaining space 1032 (3592 total), needed 28
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Processing ; Leadscrew locations (really, kinematic coupling locations) extracted from CAD model assuming back right build plate corner is (0, 0)
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Completed ; Leadscrew locations (really, kinematic coupling locations) extracted from CAD model assuming back right build plate corner is (0, 0)
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Processing M671 X300:5:152.5 Y316:316:-14 S10; Front Left: (300, 316) | Front Right: (5, 316) | Back: (-14, 152.5)
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Sent M671 X300:5:152.5 Y316:316:-14 S10; Front Left: (300, 316) | Front Right: (5, 316) | Back: (-14, 152.5), remaining space 964 (3524 total), needed 68
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Processing ; Axis and motor configuration
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Completed ; Axis and motor configuration
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Processing M350 X16 Y16 I1; Set 16x microstepping for axes. Use interpolation.
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Sent M350 X16 Y16 I1; Set 16x microstepping for axes. Use interpolation., remaining space 920 (3480 total), needed 44
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Processing M350 U4 I1; Set 4x for toolchanger lock. Use interpolation.
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Processing M350 Z16 I1; Set 16x microstepping for axes. Use interpolation.
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Sent M350 U4 I1; Set 4x for toolchanger lock. Use interpolation., remaining space 884 (3444 total), needed 36
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Sent M350 Z16 I1; Set 16x microstepping for axes. Use interpolation., remaining space 848 (3408 total), needed 36
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Processing M350 E16 I1
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Sent M350 E16 I1, remaining space 812 (3372 total), needed 36
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Processing M574 X1 S1 P"io0.in"; Set homing switch configuration S1 = low-end, active-high (NC)
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Processing M574 Y1 S1 P"io1.in"; Set homing switch configuration S1 = low-end, active-high (NC)
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Sent M574 X1 S1 P"io0.in"; Set homing switch configuration S1 = low-end, active-high (NC), remaining space 760 (3320 total), needed 52
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Sent M574 Y1 S1 P"io1.in"; Set homing switch configuration S1 = low-end, active-high (NC), remaining space 708 (3268 total), needed 52
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Processing M574 U1 S1 P"io2.in"; Set homing switch configuration S1 = low-end, active-high (NC)
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Sent M574 U1 S1 P"io2.in"; Set homing switch configuration S1 = low-end, active-high (NC), remaining space 656 (3216 total), needed 52
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Processing M558 P5 C"io3.in" H5 A5 T6000 S0.02; Z probe - Set the height of the bed when homing G28.  Combined with content of bed.g as invoked by G32, levels bed. Also used for Mesh.
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Processing ; P5 = Switch, NC
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Completed ; P5 = Switch, NC
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Sent M558 P5 C"io3.in" H5 A5 T6000 S0.02; Z probe - Set the height of the bed when homing G28.  Combined with content of bed.g as invoked by G32, levels bed. Also used for Mesh. , remaining space 580 (3140 total), needed 76
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Processing ; C  = Input Connector
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Completed ; C  = Input Connector
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Processing ; Hn = dive height
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Completed ; Hn = dive height
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Processing ;   A bigger dive height prevents a situation where the bed is out of alignment by more than the dive height
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Completed ;   A bigger dive height prevents a situation where the bed is out of alignment by more than the dive height
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Processing ;   on any corner, which can crash the hot-end into the bed while moving the head in XY.
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Completed ;   on any corner, which can crash the hot-end into the bed while moving the head in XY.
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Processing ;   Probing speed and travel speed are similarly reduced in case the Z probe isn't connected properly (or
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Completed ;   Probing speed and travel speed are similarly reduced in case the Z probe isn't connected properly (or
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Processing ;   disconnects later after moving to a point) giving the user more time to stop.
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Completed ;   disconnects later after moving to a point) giving the user more time to stop.
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Processing ; An = Number of times to probe each point.
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Completed ; An = Number of times to probe each point.
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Processing ; Tnnn = Travel speed between probe points.
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Completed ; Tnnn = Travel speed between probe points.
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Processing ; Snnn = Tolerance when probing multiple times. Two readings inside this window and we move on.
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Completed ; Snnn = Tolerance when probing multiple times. Two readings inside this window and we move on.
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Processing M906 X1500 Y1500 Z800 E1250 U900 I30; Motor currents (mA)
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Sent M906 X1500 Y1500 Z800 E1250 U900 I30; Motor currents (mA), remaining space 512 (3072 total), needed 68
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Processing M201 X800 Y800 Z10 E1000 U1000; Accelerations (mm/s^2)
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Sent M201 X800 Y800 Z10 E1000 U1000; Accelerations (mm/s^2), remaining space 452 (3012 total), needed 60
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Processing M203 X25000 Y25000 Z400 E4000 U10000; Maximum speeds (mm/min)
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Sent M203 X25000 Y25000 Z400 E4000 U10000; Maximum speeds (mm/min), remaining space 392 (2952 total), needed 60
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Processing M566 X1400 Y1400 Z2 E3000 U200; Maximum jerk speeds mm/minute
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Sent M566 X1400 Y1400 Z2 E3000 U200; Maximum jerk speeds mm/minute, remaining space 332 (2892 total), needed 60
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Processing ;M92 X200 Y200                           ; Steps/mm for X,Y with 16 tooth pulleys (preferred).
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Completed ;M92 X200 Y200                           ; Steps/mm for X,Y with 16 tooth pulleys (preferred).
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Processing M92 X160 Y160; Steps/mm for X,Y with 20 tooth pulleys.
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Sent M92 X160 Y160; Steps/mm for X,Y with 20 tooth pulleys. , remaining space 296 (2856 total), needed 36
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Processing M92 Z3200; Steps/mm for Z - TR8*4 / 0.9 deg stepper
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Sent M92 Z3200; Steps/mm for Z - TR8*4 / 0.9 deg stepper, remaining space 268 (2828 total), needed 28
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Processing M92 U11.429; Steps/mm for tool lock geared motor.
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Sent M92 U11.429; Steps/mm for tool lock geared motor. , remaining space 240 (2800 total), needed 28
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Processing M92 E837; Extruder - 0.9 deg/step
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Sent M92 E837; Extruder - 0.9 deg/step, remaining space 212 (2772 total), needed 28
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Processing ; Set axis software limits and min/max switch-triggering positions. Adjust such that (0,0) lies at the lower left corner of the build plate.
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Completed ; Set axis software limits and min/max switch-triggering positions. Adjust such that (0,0) lies at the lower left corner of the build plate.
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Processing M208 X-5:305 Y-10:355 Z-0.5:220
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Sent M208 X-5:305 Y-10:355 Z-0.5:220, remaining space 144 (2704 total), needed 68
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Processing M208 U0:180
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Sent M208 U0:180, remaining space 108 (2668 total), needed 36
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Processing ; Temperature sensors
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Completed ; Temperature sensors
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Processing M308 S0 P"0.temp0" Y"thermistor" T100000 B3950 A"Bed"
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Sent M308 S0 P"0.temp0" Y"thermistor" T100000 B3950 A"Bed", remaining space 16 (2576 total), needed 92
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Processing M308 S1 P"1.temp0" Y"thermistor" T100000 B3950 A"Ex0"
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Processing M308 S2 P"1.temp1" Y"thermistor" T100000 B3950 A"Ex1"
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Processing ; Heaters
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Completed ; Heaters
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Processing M950 H0 C"0.out0" T0; Bed.  H = Heater 0, C is output for heater itself, T = Temperature sensor (defined above)
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Processing M950 H1 C"1.out0" T1; Heater for extruder out tool 0
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Processing M950 H2 C"1.out1" T2; Heater for extruder out tool 1
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Processing ; Default heater model
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Completed ; Default heater model
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Processing ;;;;M307 H0 A270.7 C90.4 D6.7 B0 S1.0          ; Default Bed Heater Parameters, before tuning / if config-override.g is missing
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Completed ;;;;M307 H0 A270.7 C90.4 D6.7 B0 S1.0          ; Default Bed Heater Parameters, before tuning / if config-override.g is missing
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Processing ; Calibration 28 Oct 2019
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Completed ; Calibration 28 Oct 2019
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Processing ;Heater 0 model: gain 139.6, time constant 252.2, dead time 0.7, max PWM 1.00, calibration voltage 24.5, mode PID
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Completed ;Heater 0 model: gain 139.6, time constant 252.2, dead time 0.7, max PWM 1.00, calibration voltage 24.5, mode PID
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Processing ;Computed PID parameters for setpoint change: P468.8, I35.594,  D225.7
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Completed ;Computed PID parameters for setpoint change: P468.8, I35.594,  D225.7
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Processing ;Computed PID parameters for     load change: P468.8, I136.631, D225.7
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Completed ;Computed PID parameters for     load change: P468.8, I136.631, D225.7
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Processing M307 H0 A140 C252 D0.7 S1.0 V24.5 B0; Tuned Bed Heater Paramaters, same as report above, also B0 to turn off bang-bang
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Processing ; Fans for hot end cooling
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Completed ; Fans for hot end cooling
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Processing M950 F10 C"1.out6"
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Processing M106 P10 S255 H1 T45; S = Speed of fan Px, Hxx = heater for thermo mode, T = temps for thermo mode.
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Sent M308 S1 P"1.temp0" Y"thermistor" T100000 B3950 A"Ex0", remaining space 948 (2484 total), needed 92
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Sent M308 S2 P"1.temp1" Y"thermistor" T100000 B3950 A"Ex1", remaining space 856 (2392 total), needed 92
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Sent M950 H0 C"0.out0" T0; Bed.  H = Heater 0, C is output for heater itself, T = Temperature sensor (defined above), remaining space 804 (2340 total), needed 52
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Sent M950 H1 C"1.out0" T1; Heater for extruder out tool 0, remaining space 752 (2288 total), needed 52
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Sent M950 H2 C"1.out1" T2; Heater for extruder out tool 1, remaining space 700 (2236 total), needed 52
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Sent M307 H0 A140 C252 D0.7 S1.0 V24.5 B0; Tuned Bed Heater Paramaters, same as report above, also B0 to turn off bang-bang, remaining space 624 (2160 total), needed 76
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Sent M950 F10 C"1.out6", remaining space 580 (2116 total), needed 44
Nov 05 16:54:25 duet3 DuetControlServer[14073]: [info] Sent M106 P10 S255 H1 T45; S = Speed of fan Px, Hxx = heater for thermo mode, T = temps for thermo mode., remaining space 528 (2064 total), needed 52
Nov 05 16:54:26 duet3 DuetControlServer[14073]: [info] Processing ;M98 P"config-user.g"    ; Load custom user config if one exists.
Nov 05 16:54:26 duet3 DuetControlServer[14073]: [info] Completed ;M98 P"config-user.g"    ; Load custom user config if one exists.
Nov 05 16:54:26 duet3 DuetControlServer[14073]: [info] Processing M98 P"/sys/Toffsets.g"; Set tool offsets from the bed. In separate file so test macro can invoke.
Nov 05 16:54:26 duet3 DuetControlServer[14073]: [info] Processing M572 D1 S0.1; Set pressure advance on Extruder Drive 1
Nov 05 16:54:26 duet3 DuetControlServer[14073]: [info] Processing G10 P1 S0 R0; Set tool 1 operating and standby temperatures(-273 = "off")
Nov 05 16:54:26 duet3 DuetControlServer[14073]: [info] Processing M563 P1 S"Tool 1" D1 H2 F1; Px = Tool number, Dx = Drive Number (start at 0, after movement drives), H1 = Heater Number, Fx = Fan number print cooling fan
Nov 05 16:54:26 duet3 DuetControlServer[14073]: [info] Processing M572 D0 S0.1; Set pressure advance on Extruder Drive 0
Nov 05 16:54:26 duet3 DuetControlServer[14073]: [info] Processing G10 P0 S0 R0; Set tool 0 operating and standby temperatures(-273 = "off")
Nov 05 16:54:26 duet3 DuetControlServer[14073]: [info] Processing M563 P0 S"Tool 0" D0 H1 F0; Px = Tool number, Dx = Drive Number (start at 0, after movement drives), H1 = Heater Number, Fx = Fan number print cooling fan
Nov 05 16:54:26 duet3 DuetControlServer[14073]: [info] Processing ; Tool definitions
Nov 05 16:54:26 duet3 DuetControlServer[14073]: [info] Completed ; Tool definitions
Nov 05 16:54:26 duet3 DuetControlServer[14073]: [info] Processing M106 P1 C"PrintCool1"
Nov 05 16:54:26 duet3 DuetControlServer[14073]: [info] Processing M950 F1 C"1.out4"
Nov 05 16:54:26 duet3 DuetControlServer[14073]: [info] Processing M106 P0 C"PrintCool0"
Nov 05 16:54:26 duet3 DuetControlServer[14073]: [info] Processing M950 F0 C"1.out3"
Nov 05 16:54:26 duet3 DuetControlServer[14073]: [info] Processing ; Fans for print cooling
Nov 05 16:54:26 duet3 DuetControlServer[14073]: [info] Completed ; Fans for print cooling
Nov 05 16:54:26 duet3 DuetControlServer[14073]: [info] Processing M106 P11 S255 H2 T45; S = Speed of fan Px, Hxx = heater for thermo mode, T = temps for thermo mode.
Nov 05 16:54:26 duet3 DuetControlServer[14073]: [info] Processing M950 F11 C"1.out7"
Nov 05 16:54:26 duet3 DuetControlServer[14073]: [info] Completed M906 X1500 Y1500 Z800 E1250 U900 I30; Motor currents (mA)
Nov 05 16:54:26 duet3 DuetControlServer[14073]: [info] Completed M558 P5 C"io3.in" H5 A5 T6000 S0.02; Z probe - Set the height of the bed when homing G28.  Combined with content of bed.g as invoked by G32, levels bed. Also used for Mesh.
Nov 05 16:54:26 duet3 DuetControlServer[14073]: [info] Completed M574 U1 S1 P"io2.in"; Set homing switch configuration S1 = low-end, active-high (NC)
Nov 05 16:54:26 duet3 DuetControlServer[14073]: [info] Sent M950 F11 C"1.out7", remaining space 980 (3540 total), needed 44
Nov 05 16:54:26 duet3 DuetControlServer[14073]: [info] Sent M106 P11 S255 H2 T45; S = Speed of fan Px, Hxx = heater for thermo mode, T = temps for thermo mode., remaining space 928 (3488 total), needed 52
Nov 05 16:54:26 duet3 DuetControlServer[14073]: [info] Sent M950 F0 C"1.out3", remaining space 884 (3444 total), needed 44
Nov 05 16:54:26 duet3 DuetControlServer[14073]: [info] Sent M106 P0 C"PrintCool0", remaining space 836 (3396 total), needed 48
Nov 05 16:54:26 duet3 DuetControlServer[14073]: [info] Sent M950 F1 C"1.out4", remaining space 792 (3352 total), needed 44
Nov 05 16:54:26 duet3 DuetControlServer[14073]: [info] Sent M106 P1 C"PrintCool1", remaining space 744 (3304 total), needed 48
Nov 05 16:54:26 duet3 DuetControlServer[14073]: [info] Sent M563 P0 S"Tool 0" D0 H1 F0; Px = Tool number, Dx = Drive Number (start at 0, after movement drives), H1 = Heater Number, Fx = Fan number print cooling fan, remaining space 676 (3236 total), needed 68
Nov 05 16:54:26 duet3 DuetControlServer[14073]: [info] Sent G10 P0 S0 R0; Set tool 0 operating and standby temperatures(-273 = "off"), remaining space 632 (3192 total), needed 44
Nov 05 16:54:26 duet3 DuetControlServer[14073]: [info] Completed M555 P2; Set Marlin-style output
Nov 05 16:54:26 duet3 DuetControlServer[14073]: [info] Sent M572 D0 S0.1; Set pressure advance on Extruder Drive 0, remaining space 596 (3156 total), needed 36
Nov 05 16:54:26 duet3 DuetControlServer[14073]: [info] Sent M563 P1 S"Tool 1" D1 H2 F1; Px = Tool number, Dx = Drive Number (start at 0, after movement drives), H1 = Heater Number, Fx = Fan number print cooling fan, remaining space 528 (3088 total), needed 68
Nov 05 16:54:26 duet3 DuetControlServer[14073]: [info] Sent G10 P1 S0 R0; Set tool 1 operating and standby temperatures(-273 = "off"), remaining space 484 (3044 total), needed 44
Nov 05 16:54:26 duet3 DuetControlServer[14073]: [info] Sent M572 D1 S0.1; Set pressure advance on Extruder Drive 1, remaining space 448 (3008 total), needed 36
Nov 05 16:54:26 duet3 DuetControlServer[14073]: [info] Sent M98 P"/sys/Toffsets.g"; Set tool offsets from the bed. In separate file so test macro can invoke. , remaining space 404 (2964 total), needed 44
Nov 05 16:54:26 duet3 DuetControlServer[14073]: [info] Processing ; See the following link for more details. https://duet3d.dozuki.com/Wiki/Tuning_the_heater_temperature_control
Nov 05 16:54:26 duet3 DuetControlServer[14073]: [info] Completed ; See the following link for more details. https://duet3d.dozuki.com/Wiki/Tuning_the_heater_temperature_control
Nov 05 16:54:26 duet3 DuetControlServer[14073]: [info] Processing ; Note: you will need to tune the bed heater, and both extruder cartridges before printing.
Nov 05 16:54:26 duet3 DuetControlServer[14073]: [info] Completed ; Note: you will need to tune the bed heater, and both extruder cartridges before printing.
Nov 05 16:54:26 duet3 DuetControlServer[14073]: [info] Processing G29 S1
Nov 05 16:54:26 duet3 DuetControlServer[14073]: [info] Processing ;M501                    ; Load saved parameters from non-volatile memory
Nov 05 16:54:26 duet3 DuetControlServer[14073]: [info] Completed ;M501                    ; Load saved parameters from non-volatile memory
Nov 05 16:54:26 duet3 DuetControlServer[14073]: [info] Completed M308 S0 P"0.temp0" Y"thermistor" T100000 B3950 A"Bed"
Nov 05 16:54:26 duet3 DuetControlServer[14073]: [info] Completed M208 U0:180
Nov 05 16:54:26 duet3 DuetControlServer[14073]: [info] Completed M208 X-5:305 Y-10:355 Z-0.5:220
Nov 05 16:54:26 duet3 DuetControlServer[14073]: [info] Completed M92 E837; Extruder - 0.9 deg/step
Nov 05 16:54:26 duet3 DuetControlServer[14073]: [info] Completed M92 U11.429; Steps/mm for tool lock geared motor.
Nov 05 16:54:26 duet3 DuetControlServer[14073]: [info] Completed M92 Z3200; Steps/mm for Z - TR8*4 / 0.9 deg stepper
Nov 05 16:54:26 duet3 DuetControlServer[14073]: [info] Completed M92 X160 Y160; Steps/mm for X,Y with 20 tooth pulleys.
Nov 05 16:54:26 duet3 DuetControlServer[14073]: [info] Completed M566 X1400 Y1400 Z2 E3000 U200; Maximum jerk speeds mm/minute
Nov 05 16:54:26 duet3 DuetControlServer[14073]: [info] Completed M203 X25000 Y25000 Z400 E4000 U10000; Maximum speeds (mm/min)
Nov 05 16:54:26 duet3 DuetControlServer[14073]: [info] Completed M584 X0 Y1 U2 Z3:4:5; X and Y for CoreXY.  U for toolchanger lock. Z has three drivers for kinematic bed suspension.
Nov 05 16:54:26 duet3 DuetControlServer[14073]: [info] Completed M201 X800 Y800 Z10 E1000 U1000; Accelerations (mm/s^2)
Nov 05 16:54:26 duet3 DuetControlServer[14073]: [info] Completed M584 E1.0:1.1; Extruders for four tools.
Nov 05 16:54:26 duet3 DuetControlServer[14073]: [info] Completed M569 P0 S0; Drive 0 direction | X stepper
Nov 05 16:54:26 duet3 DuetControlServer[14073]: [info] Completed M569 P1 S0; Drive 1 direction | Y Stepper
Nov 05 16:54:26 duet3 DuetControlServer[14073]: [info] Completed M569 P2 S0; Drive 2 direction | U Tool Changer Lock
Nov 05 16:54:26 duet3 DuetControlServer[14073]: [info] Completed M569 P3 S0; Drive 3 direction | Front Left Z
Nov 05 16:54:26 duet3 DuetControlServer[14073]: [info] Completed M569 P4 S0; Drive 4 direction | Front Right Z
Nov 05 16:54:26 duet3 DuetControlServer[14073]: [info] Completed M569 P5 S0; Drive 5 direction | Back Z
Nov 05 16:54:26 duet3 DuetControlServer[14073]: [info] Completed M569 P6 S1; Drive 6 direction | Extruder T0
Nov 05 16:54:26 duet3 DuetControlServer[14073]: [info] Completed M569 P7 S0; Drive 7 direction | Extruder T1
Nov 05 16:54:26 duet3 DuetControlServer[14073]: [info] Completed M669 K1; CoreXY mode
Nov 05 16:54:26 duet3 DuetControlServer[14073]: [info] Completed M671 X300:5:152.5 Y316:316:-14 S10; Front Left: (300, 316) | Front Right: (5, 316) | Back: (-14, 152.5)
Nov 05 16:54:26 duet3 DuetControlServer[14073]: [info] Completed M350 X16 Y16 I1; Set 16x microstepping for axes. Use interpolation.
Nov 05 16:54:26 duet3 DuetControlServer[14073]: [info] Completed M350 U4 I1; Set 4x for toolchanger lock. Use interpolation.
Nov 05 16:54:26 duet3 DuetControlServer[14073]: [info] Completed M350 Z16 I1; Set 16x microstepping for axes. Use interpolation.
Nov 05 16:54:26 duet3 DuetControlServer[14073]: [info] Completed M350 E16 I1
Nov 05 16:54:26 duet3 DuetControlServer[14073]: [info] Completed M574 X1 S1 P"io0.in"; Set homing switch configuration S1 = low-end, active-high (NC)
Nov 05 16:54:26 duet3 DuetControlServer[14073]: [info] Completed M574 Y1 S1 P"io1.in"; Set homing switch configuration S1 = low-end, active-high (NC)
Nov 05 16:54:26 duet3 DuetControlServer[14073]: [info] Completed G21; Set dimensions to millimetres
Nov 05 16:54:26 duet3 DuetControlServer[14073]: [info] Completed G90; Send absolute coordinates...
Nov 05 16:54:26 duet3 DuetControlServer[14073]: [info] Completed M83; ...but relative extruder moves
Nov 05 16:54:26 duet3 DuetControlServer[14073]: [info] Completed M106 P10 S255 H1 T45; S = Speed of fan Px, Hxx = heater for thermo mode, T = temps for thermo mode.
Nov 05 16:54:26 duet3 DuetControlServer[14073]: [info] Completed M950 F10 C"1.out6"
Nov 05 16:54:26 duet3 DuetControlServer[14073]: [info] Completed M307 H0 A140 C252 D0.7 S1.0 V24.5 B0; Tuned Bed Heater Paramaters, same as report above, also B0 to turn off bang-bang
Nov 05 16:54:26 duet3 DuetControlServer[14073]: [info] Completed M950 H2 C"1.out1" T2; Heater for extruder out tool 1
Nov 05 16:54:26 duet3 DuetControlServer[14073]: [info] Completed M950 H1 C"1.out0" T1; Heater for extruder out tool 0
Nov 05 16:54:26 duet3 DuetControlServer[14073]: [info] Completed M950 H0 C"0.out0" T0; Bed.  H = Heater 0, C is output for heater itself, T = Temperature sensor (defined above)
Nov 05 16:54:26 duet3 DuetControlServer[14073]: [info] Completed M308 S2 P"1.temp1" Y"thermistor" T100000 B3950 A"Ex1"
Nov 05 16:54:26 duet3 DuetControlServer[14073]: [info] Completed M308 S1 P"1.temp0" Y"thermistor" T100000 B3950 A"Ex0"
Nov 05 16:54:26 duet3 DuetControlServer[14073]: [info] Completed M950 F11 C"1.out7"
Nov 05 16:54:26 duet3 DuetControlServer[14073]: [info] Completed M106 P11 S255 H2 T45; S = Speed of fan Px, Hxx = heater for thermo mode, T = temps for thermo mode.
Nov 05 16:54:26 duet3 DuetControlServer[14073]: [info] Completed M950 F0 C"1.out3"
Nov 05 16:54:26 duet3 DuetControlServer[14073]: [info] Completed M106 P0 C"PrintCool0"
Nov 05 16:54:26 duet3 DuetControlServer[14073]: [info] Completed M950 F1 C"1.out4"
Nov 05 16:54:26 duet3 DuetControlServer[14073]: [info] Completed M106 P1 C"PrintCool1"
Nov 05 16:54:26 duet3 DuetControlServer[14073]: [info] Completed M563 P0 S"Tool 0" D0 H1 F0; Px = Tool number, Dx = Drive Number (start at 0, after movement drives), H1 = Heater Number, Fx = Fan number print cooling fan
Nov 05 16:54:26 duet3 DuetControlServer[14073]: [info] Completed G10 P0 S0 R0; Set tool 0 operating and standby temperatures(-273 = "off")
Nov 05 16:54:26 duet3 DuetControlServer[14073]: [info] Completed M572 D0 S0.1; Set pressure advance on Extruder Drive 0
Nov 05 16:54:26 duet3 DuetControlServer[14073]: [info] Completed M563 P1 S"Tool 1" D1 H2 F1; Px = Tool number, Dx = Drive Number (start at 0, after movement drives), H1 = Heater Number, Fx = Fan number print cooling fan
Nov 05 16:54:26 duet3 DuetControlServer[14073]: [info] Executing nested macro file '/opt/dsf/sd/sys/Toffsets.g' on channel Daemon
Nov 05 16:54:26 duet3 DuetControlServer[14073]: [info] Completed M572 D1 S0.1; Set pressure advance on Extruder Drive 1
Nov 05 16:54:26 duet3 DuetControlServer[14073]: [info] Completed G10 P1 S0 R0; Set tool 1 operating and standby temperatures(-273 = "off")
Nov 05 16:54:26 duet3 DuetControlServer[14073]: [info] Processing G10 P0 Z-2.70 X0 Y0
Nov 05 16:54:26 duet3 DuetControlServer[14073]: [info] Processing G10 P1 Z-3.05 X-1.00 Y0.30
Nov 05 16:54:26 duet3 DuetControlServer[14073]: [info] Completed G29 S1
Nov 05 16:54:26 duet3 DuetControlServer[14073]: Height map loaded from file heightmap.csv
Nov 05 16:54:26 duet3 DuetControlServer[14073]: [info] Height map loaded from file heightmap.csv
Nov 05 16:54:26 duet3 DuetControlServer[14073]: [info] Sent G10 P0 Z-2.70 X0 Y0, remaining space 1484 (4044 total), needed 52
Nov 05 16:54:26 duet3 DuetControlServer[14073]: [info] Sent G10 P1 Z-3.05 X-1.00 Y0.30, remaining space 1432 (3992 total), needed 52
Nov 05 16:54:26 duet3 DuetControlServer[14073]: [info] Completed G10 P1 Z-3.05 X-1.00 Y0.30
Nov 05 16:54:26 duet3 DuetControlServer[14073]: [info] Completed G10 P0 Z-2.70 X0 Y0
Nov 05 16:54:26 duet3 DuetControlServer[14073]: [info] Finished macro file 'Toffsets.g'
Nov 05 16:54:26 duet3 DuetControlServer[14073]: [info] Completed M98 P"/sys/Toffsets.g"; Set tool offsets from the bed. In separate file so test macro can invoke.
Nov 05 16:54:26 duet3 DuetControlServer[14073]: [info] Completed macro /opt/dsf/sd/sys/Toffsets.g + start code M98 P"/sys/Toffsets.g"; Set tool offsets from the bed. In separate file so test macro can invoke.
Nov 05 16:54:26 duet3 DuetControlServer[14073]: [info] Finished macro file 'config.g'
Nov 05 16:54:27 duet3 DuetControlServer[14073]: [info] Completed system macro /opt/dsf/sd/sys/config.g