7/24/2019, 7:08:54 PM 	M122
=== Diagnostics ===
RepRapFirmware for Duet 2 WiFi/Ethernet version 2.02.2(RTOS) running on Duet WiFi 1.02 or later + DueX5
Board ID: 08DDM-9FAM2-LW4S4-6J9D2-3S86R-KLSBX
Used output buffers: 3 of 20 (6 max)
=== RTOS ===
Static ram: 25536
Dynamic ram: 99804 of which 28 recycled
Exception stack ram used: 492
Never used ram: 5212
Tasks: NETWORK(ready,940) HEAT(blocked,1236) MAIN(running,3920) IDLE(ready,196)
Owned mutexes:
=== Platform ===
Last reset 00:00:27 ago, cause: software
Last software reset at 2019-07-24 18:34, reason: User, spinning module GCodes, available RAM 5216 bytes (slot 3)
Software reset code 0x0003 HFSR 0x00000000 CFSR 0x00000000 ICSR 0x0441f000 BFAR 0xe000ed38 SP 0xffffffff Task 0x4e49414d
Error status: 0
Free file entries: 9
SD card 0 detected, interface speed: 20.0MBytes/sec
SD card longest block write time: 0.0ms, max retries 0
MCU temperature: min 25.6, current 26.2, max 26.3
Supply voltage: min 24.4, current 24.4, max 24.7, under voltage events: 0, over voltage events: 0, power good: yes
Driver 0: ok, SG min/max 0/272
Driver 1: ok, SG min/max 0/286
Driver 2: standstill, SG min/max not available
Driver 3: standstill, SG min/max not available
Driver 4: standstill, SG min/max not available
Driver 5: ok, SG min/max 283/1023
Driver 6: ok, SG min/max 257/1023
Driver 7: ok, SG min/max 260/1023
Driver 8: ok, SG min/max 256/1023
Driver 9: standstill, SG min/max not available
Date/time: 2019-07-24 19:08:53
Cache data hit count 87595141
Slowest loop: 7.00ms; fastest: 0.07ms
I2C nak errors 0, send timeouts 0, receive timeouts 0, finishTimeouts 0
=== Move ===
Hiccups: 0, StepErrors: 0, LaErrors: 0, FreeDm: 230, MinFreeDm: 198, MaxWait: 12968ms, Underruns: 0, 1
Scheduled moves: 909, completed moves: 907
Bed compensation in use: mesh
Bed probe heights: 0.000 0.000 0.000 0.000 0.000
=== Heat ===
Bed heaters = 0 -1 -1 -1, chamberHeaters = -1 -1
Heater 1 is on, I-accum = 0.0
=== GCodes ===
Segments left: 0
Stack records: 2 allocated, 1 in use
Movement lock held by null
http is idle in state(s) 0 0
telnet is idle in state(s) 0
file is idle in state(s) 0
serial is idle in state(s) 0
aux is idle in state(s) 0
daemon is idle in state(s) 0
queue is idle in state(s) 0
autopause is idle in state(s) 0
Code queue is empty.
=== Network ===
Slowest loop: 15.68ms; fastest: 0.00ms
Responder states: HTTP(0) HTTP(0) HTTP(0) HTTP(0) FTP(0) Telnet(0) Telnet(0)
HTTP sessions: 1 of 8
- WiFi -
Network state is running
WiFi module is connected to access point 
Failed messages: pending 0, notready 0, noresp 0
WiFi firmware version 1.23
WiFi MAC address 5c:cf:7f:76:6e:11
WiFi Vcc 3.34, reset reason Turned on by main processor
WiFi flash size 4194304, free heap 25624
WiFi IP address 192.168.178.28
WiFi signal strength -68dBm, reconnections 0, sleep mode modem
Socket states: 0 0 0 0 0 0 0 0
7/24/2019, 7:08:54 PM 	M98 P"0:/macros/EccentricGearMacroProcessedSuperfineNoE.gcode"
=== Diagnostics ===
RepRapFirmware for Duet 2 WiFi/Ethernet version 2.02.2(RTOS) running on Duet WiFi 1.02 or later + DueX5
Board ID: 08DDM-9FAM2-LW4S4-6J9D2-3S86R-KLSBX
Used output buffers: 3 of 20 (6 max)
=== RTOS ===
Static ram: 25536
Dynamic ram: 99804 of which 28 recycled
Exception stack ram used: 492
Never used ram: 5212
Tasks: NETWORK(ready,940) HEAT(blocked,1236) MAIN(running,3920) IDLE(ready,196)
Owned mutexes:
=== Platform ===
Last reset 00:00:27 ago, cause: software
Last software reset at 2019-07-24 18:34, reason: User, spinning module GCodes, available RAM 5216 bytes (slot 3)
Software reset code 0x0003 HFSR 0x00000000 CFSR 0x00000000 ICSR 0x0441f000 BFAR 0xe000ed38 SP 0xffffffff Task 0x4e49414d
Error status: 0
Free file entries: 9
SD card 0 detected, interface speed: 20.0MBytes/sec
SD card longest block write time: 0.0ms, max retries 0
MCU temperature: min 25.6, current 26.2, max 26.3
Supply voltage: min 24.4, current 24.4, max 24.7, under voltage events: 0, over voltage events: 0, power good: yes
Driver 0: ok, SG min/max 0/272
Driver 1: ok, SG min/max 0/286
Driver 2: standstill, SG min/max not available
Driver 3: standstill, SG min/max not available
Driver 4: standstill, SG min/max not available
Driver 5: ok, SG min/max 283/1023
Driver 6: ok, SG min/max 257/1023
Driver 7: ok, SG min/max 260/1023
Driver 8: ok, SG min/max 256/1023
Driver 9: standstill, SG min/max not available
Date/time: 2019-07-24 19:08:53
Cache data hit count 87595141
Slowest loop: 7.00ms; fastest: 0.07ms
I2C nak errors 0, send timeouts 0, receive timeouts 0, finishTimeouts 0
=== Move ===
Hiccups: 0, StepErrors: 0, LaErrors: 0, FreeDm: 230, MinFreeDm: 198, MaxWait: 12968ms, Underruns: 0, 1
Scheduled moves: 909, completed moves: 907
Bed compensation in use: mesh
Bed probe heights: 0.000 0.000 0.000 0.000 0.000
=== Heat ===
Bed heaters = 0 -1 -1 -1, chamberHeaters = -1 -1
Heater 1 is on, I-accum = 0.0
=== GCodes ===
Segments left: 0
Stack records: 2 allocated, 1 in use
Movement lock held by null
http is idle in state(s) 0 0
telnet is idle in state(s) 0
file is idle in state(s) 0
serial is idle in state(s) 0
aux is idle in state(s) 0
daemon is idle in state(s) 0
queue is idle in state(s) 0
autopause is idle in state(s) 0
Code queue is empty.
=== Network ===
Slowest loop: 15.68ms; fastest: 0.00ms
Responder states: HTTP(0) HTTP(0) HTTP(0) HTTP(0) FTP(0) Telnet(0) Telnet(0)
HTTP sessions: 1 of 8
- WiFi -
Network state is running
WiFi module is connected to access point 
Failed messages: pending 0, notready 0, noresp 0
WiFi firmware version 1.23
WiFi MAC address 5c:cf:7f:76:6e:11
WiFi Vcc 3.34, reset reason Turned on by main processor
WiFi flash size 4194304, free heap 25624
WiFi IP address 192.168.178.28
WiFi signal strength -68dBm, reconnections 0, sleep mode modem
Socket states: 0 0 0 0 0 0 0 0
=== Diagnostics ===
RepRapFirmware for Duet 2 WiFi/Ethernet version 2.02.2(RTOS) running on Duet WiFi 1.02 or later + DueX5
Board ID: 08DDM-9FAM2-LW4S4-6J9D2-3S86R-KLSBX
Used output buffers: 1 of 20 (6 max)
=== RTOS ===
Static ram: 25536
Dynamic ram: 99804 of which 28 recycled
Exception stack ram used: 512
Never used ram: 5192
Tasks: NETWORK(ready,940) HEAT(blocked,1236) MAIN(running,3920) IDLE(ready,196)
Owned mutexes:
=== Platform ===
Last reset 00:02:33 ago, cause: software
Last software reset at 2019-07-23 22:13, reason: User, spinning module GCodes, available RAM 5192 bytes (slot 2)
Software reset code 0x0003 HFSR 0x00000000 CFSR 0x00000000 ICSR 0x0441f000 BFAR 0xe000ed38 SP 0xffffffff Task 0x4e49414d
Error status: 0
Free file entries: 9
SD card 0 detected, interface speed: 20.0MBytes/sec
SD card longest block write time: 0.0ms, max retries 0
MCU temperature: min 25.1, current 25.8, max 26.1
Supply voltage: min 24.4, current 24.5, max 24.7, under voltage events: 0, over voltage events: 0, power good: yes
Driver 0: ok, SG min/max 0/276
Driver 1: ok, SG min/max 0/290
Driver 2: standstill, SG min/max not available
Driver 3: standstill, SG min/max not available
Driver 4: standstill, SG min/max not available
Driver 5: standstill, SG min/max 281/1023
Driver 6: standstill, SG min/max 304/1023
Driver 7: standstill, SG min/max 260/1023
Driver 8: standstill, SG min/max 259/1023
Driver 9: standstill, SG min/max not available
Date/time: 2019-07-23 22:15:39
Cache data hit count 566258929
Slowest loop: 9.07ms; fastest: 0.07ms
I2C nak errors 0, send timeouts 0, receive timeouts 0, finishTimeouts 0
=== Move ===
Hiccups: 0, StepErrors: 0, LaErrors: 0, FreeDm: 209, MinFreeDm: 177, MaxWait: 140389ms, Underruns: 0, 52
Scheduled moves: 362, completed moves: 334
Bed compensation in use: mesh
Bed probe heights: 0.000 0.000 0.000 0.000 0.000
=== Heat ===
Bed heaters = 0 -1 -1 -1, chamberHeaters = -1 -1
Heater 1 is on, I-accum = 0.0
=== GCodes ===
Segments left: 0
Stack records: 2 allocated, 1 in use
Movement lock held by null
http is idle in state(s) 0 0
telnet is idle in state(s) 0
file is idle in state(s) 0
serial is idle in state(s) 0
aux is idle in state(s) 0
daemon is idle in state(s) 0
queue is idle in state(s) 0
autopause is idle in state(s) 0
Code queue is empty.
=== Network ===
Slowest loop: 15.79ms; fastest: 0.00ms
Responder states: HTTP(0) HTTP(0) HTTP(0) HTTP(0) FTP(0) Telnet(0) Telnet(0)
HTTP sessions: 1 of 8
- WiFi -
Network state is running
WiFi module is connected to access point 
Failed messages: pending 0, notready 0, noresp 0
WiFi firmware version 1.23
WiFi MAC address 5c:cf:7f:76:6e:11
WiFi Vcc 3.34, reset reason Turned on by main processor
WiFi flash size 4194304, free heap 25456
WiFi IP address 192.168.178.28
WiFi signal strength -65dBm, reconnections 0, sleep mode modem
Socket states: 0 0 0 0 0 0 0 0
7/23/2019, 10:15:41 PM 	M98 P"0:/macros/EccentricGearMacroProcessedSuperfineNoE.gcode"
=== Diagnostics ===
RepRapFirmware for Duet 2 WiFi/Ethernet version 2.02.2(RTOS) running on Duet WiFi 1.02 or later + DueX5
Board ID: 08DDM-9FAM2-LW4S4-6J9D2-3S86R-KLSBX
Used output buffers: 1 of 20 (6 max)
=== RTOS ===
Static ram: 25536
Dynamic ram: 99804 of which 28 recycled
Exception stack ram used: 512
Never used ram: 5192
Tasks: NETWORK(ready,940) HEAT(blocked,1236) MAIN(running,3920) IDLE(ready,196)
Owned mutexes:
=== Platform ===
Last reset 00:02:33 ago, cause: software
Last software reset at 2019-07-23 22:13, reason: User, spinning module GCodes, available RAM 5192 bytes (slot 2)
Software reset code 0x0003 HFSR 0x00000000 CFSR 0x00000000 ICSR 0x0441f000 BFAR 0xe000ed38 SP 0xffffffff Task 0x4e49414d
Error status: 0
Free file entries: 9
SD card 0 detected, interface speed: 20.0MBytes/sec
SD card longest block write time: 0.0ms, max retries 0
MCU temperature: min 25.1, current 25.8, max 26.1
Supply voltage: min 24.4, current 24.5, max 24.7, under voltage events: 0, over voltage events: 0, power good: yes
Driver 0: ok, SG min/max 0/276
Driver 1: ok, SG min/max 0/290
Driver 2: standstill, SG min/max not available
Driver 3: standstill, SG min/max not available
Driver 4: standstill, SG min/max not available
Driver 5: standstill, SG min/max 281/1023
Driver 6: standstill, SG min/max 304/1023
Driver 7: standstill, SG min/max 260/1023
Driver 8: standstill, SG min/max 259/1023
Driver 9: standstill, SG min/max not available
Date/time: 2019-07-23 22:15:39
Cache data hit count 566258929
Slowest loop: 9.07ms; fastest: 0.07ms
I2C nak errors 0, send timeouts 0, receive timeouts 0, finishTimeouts 0
=== Move ===
Hiccups: 0, StepErrors: 0, LaErrors: 0, FreeDm: 209, MinFreeDm: 177, MaxWait: 140389ms, Underruns: 0, 52
Scheduled moves: 362, completed moves: 334
Bed compensation in use: mesh
Bed probe heights: 0.000 0.000 0.000 0.000 0.000
=== Heat ===
Bed heaters = 0 -1 -1 -1, chamberHeaters = -1 -1
Heater 1 is on, I-accum = 0.0
=== GCodes ===
Segments left: 0
Stack records: 2 allocated, 1 in use
Movement lock held by null
http is idle in state(s) 0 0
telnet is idle in state(s) 0
file is idle in state(s) 0
serial is idle in state(s) 0
aux is idle in state(s) 0
daemon is idle in state(s) 0
queue is idle in state(s) 0
autopause is idle in state(s) 0
Code queue is empty.
=== Network ===
Slowest loop: 15.79ms; fastest: 0.00ms
Responder states: HTTP(0) HTTP(0) HTTP(0) HTTP(0) FTP(0) Telnet(0) Telnet(0)
HTTP sessions: 1 of 8
- WiFi -
Network state is running
WiFi module is connected to access point 
Failed messages: pending 0, notready 0, noresp 0
WiFi firmware version 1.23
WiFi MAC address 5c:cf:7f:76:6e:11
WiFi Vcc 3.34, reset reason Turned on by main processor
WiFi flash size 4194304, free heap 25456
WiFi IP address 192.168.178.28
WiFi signal strength -65dBm, reconnections 0, sleep mode modem
Socket states: 0 0 0 0 0 0 0 0
=== Diagnostics ===
RepRapFirmware for Duet 2 WiFi/Ethernet version 2.02.2(RTOS) running on Duet WiFi 1.02 or later + DueX5
Board ID: 08DDM-9FAM2-LW4S4-6J9D2-3S86R-KLSBX
Used output buffers: 3 of 20 (6 max)
=== RTOS ===
Static ram: 25536
Dynamic ram: 99804 of which 28 recycled
Exception stack ram used: 488
Never used ram: 5216
Tasks: NETWORK(ready,940) HEAT(blocked,1236) MAIN(running,3920) IDLE(ready,196)
Owned mutexes:
=== Platform ===
Last reset 00:01:21 ago, cause: software
Last software reset at 2019-07-23 20:22, reason: User, spinning module GCodes, available RAM 10288 bytes (slot 2)
Software reset code 0x0003 HFSR 0x00000000 CFSR 0x00000000 ICSR 0x0041f000 BFAR 0xe000ed38 SP 0xffffffff Task 0x4e49414d
Error status: 0
Free file entries: 9
SD card 0 detected, interface speed: 20.0MBytes/sec
SD card longest block write time: 0.0ms, max retries 0
MCU temperature: min 25.4, current 26.0, max 26.3
Supply voltage: min 24.4, current 24.5, max 24.7, under voltage events: 0, over voltage events: 0, power good: yes
Driver 0: ok, SG min/max 0/283
Driver 1: ok, SG min/max 0/940
Driver 2: standstill, SG min/max 0/310
Driver 3: standstill, SG min/max 0/294
Driver 4: standstill, SG min/max not available
Driver 5: ok, SG min/max 241/1023
Driver 6: ok, SG min/max 260/1023
Driver 7: ok, SG min/max 261/1023
Driver 8: ok, SG min/max 259/1023
Driver 9: standstill, SG min/max not available
Date/time: 2019-07-23 20:30:09
Cache data hit count 262094125
Slowest loop: 6.54ms; fastest: 0.07ms
I2C nak errors 0, send timeouts 0, receive timeouts 0, finishTimeouts 0
=== Move ===
Hiccups: 0, StepErrors: 0, LaErrors: 0, FreeDm: 230, MinFreeDm: 178, MaxWait: 11612ms, Underruns: 0, 12
Scheduled moves: 29670, completed moves: 29667
Bed compensation in use: mesh
Bed probe heights: 0.000 0.000 0.000 0.000 0.000
=== Heat ===
Bed heaters = 0 -1 -1 -1, chamberHeaters = -1 -1
Heater 1 is on, I-accum = 0.0
=== GCodes ===
Segments left: 0
Stack records: 2 allocated, 1 in use
Movement lock held by null
http is idle in state(s) 0 0
telnet is idle in state(s) 0
file is idle in state(s) 0
serial is idle in state(s) 0
aux is idle in state(s) 0
daemon is idle in state(s) 0
queue is idle in state(s) 0
autopause is idle in state(s) 0
Code queue is empty.
=== Network ===
Slowest loop: 15.81ms; fastest: 0.00ms
Responder states: HTTP(0) HTTP(0) HTTP(0) HTTP(0) FTP(0) Telnet(0) Telnet(0)
HTTP sessions: 1 of 8
- WiFi -
Network state is running
WiFi module is connected to access point 
Failed messages: pending 0, notready 0, noresp 0
WiFi firmware version 1.23
WiFi MAC address 5c:cf:7f:76:6e:11
WiFi Vcc 3.34, reset reason Turned on by main processor
WiFi flash size 4194304, free heap 25512
WiFi IP address 192.168.178.28
WiFi signal strength -66dBm, reconnections 0, sleep mode modem
Socket states: 0 0 0 0 0 0 0 0
7/23/2019, 8:30:10 PM 	M98 P"0:/macros/EccentricGearMacroProcessedSuperfineNoE.gcode"
=== Diagnostics ===
RepRapFirmware for Duet 2 WiFi/Ethernet version 2.02.2(RTOS) running on Duet WiFi 1.02 or later + DueX5
Board ID: 08DDM-9FAM2-LW4S4-6J9D2-3S86R-KLSBX
Used output buffers: 3 of 20 (6 max)
=== RTOS ===
Static ram: 25536
Dynamic ram: 99804 of which 28 recycled
Exception stack ram used: 488
Never used ram: 5216
Tasks: NETWORK(ready,940) HEAT(blocked,1236) MAIN(running,3920) IDLE(ready,196)
Owned mutexes:
=== Platform ===
Last reset 00:01:21 ago, cause: software
Last software reset at 2019-07-23 20:22, reason: User, spinning module GCodes, available RAM 10288 bytes (slot 2)
Software reset code 0x0003 HFSR 0x00000000 CFSR 0x00000000 ICSR 0x0041f000 BFAR 0xe000ed38 SP 0xffffffff Task 0x4e49414d
Error status: 0
Free file entries: 9
SD card 0 detected, interface speed: 20.0MBytes/sec
SD card longest block write time: 0.0ms, max retries 0
MCU temperature: min 25.4, current 26.0, max 26.3
Supply voltage: min 24.4, current 24.5, max 24.7, under voltage events: 0, over voltage events: 0, power good: yes
Driver 0: ok, SG min/max 0/283
Driver 1: ok, SG min/max 0/940
Driver 2: standstill, SG min/max 0/310
Driver 3: standstill, SG min/max 0/294
Driver 4: standstill, SG min/max not available
Driver 5: ok, SG min/max 241/1023
Driver 6: ok, SG min/max 260/1023
Driver 7: ok, SG min/max 261/1023
Driver 8: ok, SG min/max 259/1023
Driver 9: standstill, SG min/max not available
Date/time: 2019-07-23 20:30:09
Cache data hit count 262094125
Slowest loop: 6.54ms; fastest: 0.07ms
I2C nak errors 0, send timeouts 0, receive timeouts 0, finishTimeouts 0
=== Move ===
Hiccups: 0, StepErrors: 0, LaErrors: 0, FreeDm: 230, MinFreeDm: 178, MaxWait: 11612ms, Underruns: 0, 12
Scheduled moves: 29670, completed moves: 29667
Bed compensation in use: mesh
Bed probe heights: 0.000 0.000 0.000 0.000 0.000
=== Heat ===
Bed heaters = 0 -1 -1 -1, chamberHeaters = -1 -1
Heater 1 is on, I-accum = 0.0
=== GCodes ===
Segments left: 0
Stack records: 2 allocated, 1 in use
Movement lock held by null
http is idle in state(s) 0 0
telnet is idle in state(s) 0
file is idle in state(s) 0
serial is idle in state(s) 0
aux is idle in state(s) 0
daemon is idle in state(s) 0
queue is idle in state(s) 0
autopause is idle in state(s) 0
Code queue is empty.
=== Network ===
Slowest loop: 15.81ms; fastest: 0.00ms
Responder states: HTTP(0) HTTP(0) HTTP(0) HTTP(0) FTP(0) Telnet(0) Telnet(0)
HTTP sessions: 1 of 8
- WiFi -
Network state is running
WiFi module is connected to access point 
Failed messages: pending 0, notready 0, noresp 0
WiFi firmware version 1.23
WiFi MAC address 5c:cf:7f:76:6e:11
WiFi Vcc 3.34, reset reason Turned on by main processor
WiFi flash size 4194304, free heap 25512
WiFi IP address 192.168.178.28
WiFi signal strength -66dBm, reconnections 0, sleep mode modem
Socket states: 0 0 0 0 0 0 0 0