; homeX,Y.g
; called to home all axes
;
; generated by RepRapFirmware Configuration Tool on Sat Nov 25 2017 12:15:39 GMT-0500 (Eastern Standard Time)

; Relative positioning
G91
G1 Z5 F3000 S2               ;lift Z 5mm
G1 X-295 y-302 F1500 S1   ;relative move to x,y -295mm neg dir stop at switch
G1 X5 Y5 F1000  S2          ;relative back off switch 5mm pos dir  
G1 X-295 Y-302 F360 S1     ;relative move x,y -295mm alliance neg stop at switch slowly
G90                       ;absolute moves
G1 X148.5 Y151 F2000 S2        ; put probe center of bed
G91
M401
G30                         ;lower probe set height
M402
G90