M122
SENDING:M122
=== Diagnostics ===
RepRapFirmware for Duet 2 WiFi/Ethernet version 2.03beta3 running on Duet WiFi 1.02 or later
Board ID: 08DGM-956GU-DJMSJ-6JTDA-3SS6L-TARHD
Used output buffers: 18 of 20 (20 max)
=== RTOS ===
Static ram: 25632
Dynamic ram: 93860 of which 372 recycled
Exception stack ram used: 556
Never used ram: 10652
Tasks: NETWORK(ready,468) HEAT(blocked,1236) MAIN(running,3840) IDLE(ready,196)
Owned mutexes:
=== Platform ===
Last reset 17:38:23 ago, cause: power up
Last software reset at 2019-04-18 21:Error status: 20
Free file entries: 10
SD card 0 detected, interface speed: 20.0MBytes/sec
SD card longest block write time: 379.3ms, max retries 0
MCU temperature: min 23.5, current 24.3, max 52.9
Supply voltage: min 15.3, current 16.1, max 16.3, under voSlowest loop: 379.95ms; fastest: 0.08ms
Responder states: HTTP(4) HTTP(0) HTTP(0) HTTP(0) FTP(0) Telnet(0) Telnet(0)
HTTP sessions: 1 of 8
 WiFi -
Network state is running
WiFi module is connected to access point
Failed messages: pending 0, notready 0, noresp 0
WiFi firmware version 1.23
WiFi MAC address 5c:cf:7f:76:72:b9
WiFi Vcc 3.32, reset reason Turned on by main processor
WiFi flash size 4194304, free heap 23848
WiFi IP address 192.168.1.112
WiFi signal strength -64dBm, reconnections 0, sleep mode modem
Socket states: 0 0 0 0 0 0 0 0

M552
SENDING:M552
WiFi module is connected to access point radus-home, IP address 192.168.1.112

M552S-1
SENDING:M552S-1
WiFi module stopped

M552S1
SENDING:M552S1
WiFi module started
WiFi module is connected to access point radus-home, IP address 192.168.1.112